Parker Ferulok CC5BU 90 Degree Elbows

Parker Ferulok CC5BU 90 Degree Elbows in steel body steel ferrule: 6 part numbers.
Product description
Parker Ferulok CC5BU 90 Degree Elbows in steel body steel ferrule: 6 part numbers.
Specification
- Type: Hydraulic Hose Fitting
- Material: Steel Body Steel Ferrule
- Connection Type: 5/8" Flareless Bite Type Connection 7/8" (7/8-14, 7/8 X 14) UN/UNF-2A Male O-Ring Boss Seal (SAE-ORB) Connection
- Part numbers: 6
Sizes and part numbers
The Sizes & Part Numbers tab lists every Parker part number in this range with its connections. Ratings vary by size — check the row for the part you order.
Hose and fitting match
A crimp fitting is rated only on the hose series it is designed for. Quote the hose type and size with the fitting part number so the fitting, ferrule and crimp specification can be checked against the hose before supply.
How to order
Quote the Parker part number. Price and lead time are confirmed with the quotation.
Specifications
| Parameter | Value |
|---|---|
| Application Type | Hydraulic Fluid And Gas Handling Connections |
| Connection Type | 5/8" Flareless Bite Type Connection 7/8" (7/8-14, 7/8 X 14) UN/UNF-2A Male O-Ring Boss Seal (SAE-ORB) Connection |
| Design | 7/8" Ext. Hex Threaded + Flareless Bite-Type Design #Cc5bu Model |
| Fitting Function | 1 Inlet + 1 Outlet |
| Function | Hydraulic Flareless 90° Elbow Angled Fitting |
| Main Function | Fitting (Hydraulic) |
Shipping & lead time
Sizes & part numbers
6 sizes- Parker Hannifin part no.10 CC5BU-S
- Description
- Crimp Hose Fitting
- Working pressure (bar)
- —
- Parker Hannifin part no.16 CC5BU-S
- Description
- Crimp Hose Fitting
- Working pressure (bar)
- 207
- Parker Hannifin part no.12 CC5BU-S
- Description
- Crimp Hose Fitting
- Working pressure (bar)
- 276
- Parker Hannifin part no.4 CC5BU-S
- Description
- Crimp Hose Fitting
- Working pressure (bar)
- 345
- Parker Hannifin part no.8 CC5BU-S
- Description
- Crimp Hose Fitting
- Working pressure (bar)
- 345
- Parker Hannifin part no.6 CC5BU-S
- Description
- Crimp Hose Fitting
- Working pressure (bar)
- 345
Description — What this part number is, as the manufacturer lists it. Ask us for the dimension drawing if you need it stamped.
Working pressure is the manufacturer’s published rating for the fitting itself. An assembly is limited by its lowest-rated component, so check it against the hose, the tube and the port you are mating to.
What are the Parker Ferulok CC5BU 90 Degree Elbows used for?▾
Which part numbers are in the Parker Ferulok CC5BU 90 Degree Elbows range?▾
Which sizes are listed for the Parker Ferulok CC5BU 90 Degree Elbows?▾
How do I choose the right size of Parker Ferulok CC5BU 90 Degree Elbows?▾
What pressure are the Parker Ferulok CC5BU 90 Degree Elbows rated for?▾
What is the Parker Ferulok CC5BU 90 Degree Elbows made of?▾
Which standard does the Parker Ferulok CC5BU 90 Degree Elbows follow?▾
What does the Parker Ferulok CC5BU 90 Degree Elbows connect to?▾
How should the Parker Ferulok CC5BU 90 Degree Elbows be installed?▾
How do the Parker Ferulok CC5BU 90 Degree Elbows differ from the Dixon 90 Degree Swivel Elbows?▾
Where are the Parker Ferulok CC5BU 90 Degree Elbows made, and can you export them from Dubai?▾
Are the Parker Ferulok CC5BU 90 Degree Elbows available ex-stock from Dubai?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
From the blog
Written about this range
Thread & fitting identification
Measuring a fitting without gauges: what you can establish in the field
No seat gauge, no pitch gauge, a machine down and a phone with two bars. What a caliper and a known bolt will actually tell you, and what to send.
4 min read
Assembly, crimping & certification
JIC, ORFS and NPT hose fittings: inch-thread hose ends, drop lengths and how they seal
Most hose assemblies on American and many Asian machines end in one of three inch-thread connections: a JIC 37° swivel, an ORFS swivel with an O-ring in the face, or a pipe thread. Each has its standard (ISO 12151-5, -1 and SAE J516), its seal and its trap — a 45° SAE flare that threads onto a JIC and leaks, an NPSM swivel on a nipple with no 30° seat. The inch hose-end range, including compact and long-drop elbows, and how to order an assembly with two elbows.
4 min read
Specification & standards
Where JIC is the wrong choice
JIC is the default on most of this continent and it deserves to be. It is also the wrong answer in four specific situations, and every one of them is a situation where people keep specifying it anyway.
4 min read








