Parker 51 Series Hose Fittings

Parker 51 Series Hose Fittings in steel, 3/16" to 1/2": 9 part numbers.
Product description
Parker 51 Series Hose Fittings in steel, 3/16" to 1/2": 9 part numbers.
Specification
- Type: Hydraulic Hose Fitting
- Material: Steel
- Size range: 3/16" to 1/2"
- Pressure stated by the maker: 5,000 psi (345 bar)
- Connection Type: 1/4" JIC 37° Male Flare 3/16" ID Hs. Field-Attachable Connection
- Part numbers: 9
Sizes and part numbers
The Sizes & Part Numbers tab lists every Parker part number in this range with its connections. Ratings vary by size — check the row for the part you order.
Hose and fitting match
A crimp fitting is rated only on the hose series it is designed for. Quote the hose type and size with the fitting part number so the fitting, ferrule and crimp specification can be checked against the hose before supply.
How to order
Quote the Parker part number. Price and lead time are confirmed with the quotation.
Specifications
| Parameter | Value |
|---|---|
| Application Type | Medium Pressure Hydraulic Service |
| Connection Type | 1/4" JIC 37° Male Flare 3/16" ID Hs. Field-Attachable Connection |
| Design | 5/8" Ext. Hex 2 X 9/16" Backup Hex Threaded (JIC 37° Flare) + Field Attachable Design #20651 Model |
| Fitting Function | 1 Inlet + 1 Outlet |
| Function | Hydraulic Female Swivelling/Rotatable/Rotating Field-Attachable Fitting |
| Main Function | Fitting (Hydraulic) |
Shipping & lead time
Sizes & part numbers
9 sizes- Parker Hannifin part no.20651-4-3
- Description
- Crimp Hose Fitting
- Working pressure (bar)
- —
- Parker Hannifin part no.20651-5-4
- Description
- Crimp Hose Fitting
- Working pressure (bar)
- —
- Parker Hannifin part no.20651R-6-6
- Description
- Crimp Hose Fitting
- Working pressure (bar)
- —
- Parker Hannifin part no.20651-12-12
- Description
- Crimp Hose Fitting
- Working pressure (bar)
- 345
- Parker Hannifin part no.20651R-4-4
- Description
- Crimp Hose Fitting
- Working pressure (bar)
- —
- Parker Hannifin part no.20651R-8-8
- Description
- Crimp Hose Fitting
- Working pressure (bar)
- —
- Parker Hannifin part no.20651-6-6
- Description
- Crimp Hose Fitting
- Working pressure (bar)
- 345
- Parker Hannifin part no.20651R-4-3
- Description
- Crimp Hose Fitting
- Working pressure (bar)
- —
Show all 9 sizesShow fewer sizes
- Parker Hannifin part no.20651-8-6
- Description
- Crimp Hose Fitting
- Working pressure (bar)
- 345
Description — What this part number is, as the manufacturer lists it. Ask us for the dimension drawing if you need it stamped.
Working pressure is the manufacturer’s published rating for the fitting itself. An assembly is limited by its lowest-rated component, so check it against the hose, the tube and the port you are mating to.
What are the Parker 51 Series Hose Fittings used for?▾
Which part numbers are in the Parker 51 Series Hose Fittings range?▾
Which sizes are listed for the Parker 51 Series Hose Fittings?▾
Which Parker 51 Series Hose Fittings do I need for my hose and port?▾
What is the working pressure of the Parker 51 Series Hose Fittings?▾
What is the Parker 51 Series Hose Fittings made of?▾
Does the Parker 51 Series Hose Fittings meet SAE J514, and what documents are available?▾
Which mating parts fit the Parker 51 Series Hose Fittings?▾
How should the Parker 51 Series Hose Fittings be installed?▾
How do the Parker 51 Series Hose Fittings differ from the Parker Swivel Fittings?▾
Where are the Parker 51 Series Hose Fittings made, and can you export them from Dubai?▾
Are the Parker 51 Series Hose Fittings available ex-stock from Dubai?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
From the blog
Written about this range
Thread & fitting identification
Measuring a fitting without gauges: what you can establish in the field
No seat gauge, no pitch gauge, a machine down and a phone with two bars. What a caliper and a known bolt will actually tell you, and what to send.
4 min read
Assembly, crimping & certification
JIC, ORFS and NPT hose fittings: inch-thread hose ends, drop lengths and how they seal
Most hose assemblies on American and many Asian machines end in one of three inch-thread connections: a JIC 37° swivel, an ORFS swivel with an O-ring in the face, or a pipe thread. Each has its standard (ISO 12151-5, -1 and SAE J516), its seal and its trap — a 45° SAE flare that threads onto a JIC and leaks, an NPSM swivel on a nipple with no 30° seat. The inch hose-end range, including compact and long-drop elbows, and how to order an assembly with two elbows.
4 min read
Specification & standards
Where JIC is the wrong choice
JIC is the default on most of this continent and it deserves to be. It is also the wrong answer in four specific situations, and every one of them is a situation where people keep specifying it anyway.
4 min read








