Kurt Crimp Hydraulic Hose Fittings with JIC Connection

Kurt Crimp Hydraulic Hose Fittings with JIC Connection in carbon steel: 41 part numbers.
Product description
Kurt Crimp Hydraulic Hose Fittings with JIC Connection in carbon steel: 41 part numbers.
Specification
- Type: Fitting
- Material: Carbon Steel
- Pressure stated by the maker: 2,500 to 5,000 psi (172 to 345 bar), by size
- Fitting Shape: Straight
- Part numbers: 41
Sizes and part numbers
The Sizes & Part Numbers tab lists every Kurt part number in this range with its connections. Ratings vary by size — check the row for the part you order.
Hose and fitting match
A crimp fitting is rated only on the hose series it is designed for. Quote the hose type and size with the fitting part number so the fitting, ferrule and crimp specification can be checked against the hose before supply.
How to order
Quote the Kurt part number. Price and lead time are confirmed with the quotation.
Specifications
| Parameter | Value |
|---|---|
| Fitting Material | Carbon Steel |
| For Use With Hose Series | H017 Series, H104 Series, H145 Series, H190 Series, H245 Series, H564 Series |
Shipping & lead time
Sizes & part numbers
41 sizes- Kurt part no.FJX-12-12
- Description
- Hydraulic Crimp Fitting
- Working pressure (bar)
- 172
- Kurt part no.FJX90-20-20
- Description
- Hydraulic Crimp Fitting
- Working pressure (bar)
- 103
- Kurt part no.FJX-20-20
- Description
- Hydraulic Crimp Fitting
- Working pressure (bar)
- 103
- Kurt part no.FJX45-16-16
- Description
- Hydraulic Crimp Fitting
- Working pressure (bar)
- 138
- Kurt part no.FJX90-16-16
- Description
- Hydraulic Crimp Fitting
- Working pressure (bar)
- 138
- Kurt part no.FJX-16-20
- Description
- Hydraulic Crimp Fitting
- Working pressure (bar)
- 138
- Kurt part no.FJX-16-16
- Description
- Hydraulic Crimp Fitting
- Working pressure (bar)
- 138
- Kurt part no.MJ-16-16
- Description
- Hydraulic Crimp Fitting
- Working pressure (bar)
- 138
Show all 41 sizesShow fewer sizes
Description — What this part number is, as the manufacturer lists it. Ask us for the dimension drawing if you need it stamped.
Working pressure is the manufacturer’s published rating for the fitting itself. An assembly is limited by its lowest-rated component, so check it against the hose, the tube and the port you are mating to.
What is the Kurt Crimp Hydraulic Hose Fittings with JIC Connection used for?▾
Which part numbers are in the Kurt Crimp Hydraulic Hose Fittings with JIC Connection range?▾
Which sizes are listed for the Kurt Crimp Hydraulic Hose Fittings with JIC Connection?▾
Which Kurt Crimp Hydraulic Hose Fittings with JIC Connection do I need for my hose and port?▾
What pressure is the Kurt Crimp Hydraulic Hose Fittings with JIC Connection rated for?▾
What is the Kurt Crimp Hydraulic Hose Fittings with JIC Connection made of?▾
Which standard does the Kurt Crimp Hydraulic Hose Fittings with JIC Connection follow?▾
Which mating parts fit the Kurt Crimp Hydraulic Hose Fittings with JIC Connection?▾
How do I fit and tighten the Kurt Crimp Hydraulic Hose Fittings with JIC Connection?▾
How does the Kurt Crimp Hydraulic Hose Fittings with JIC Connection differ from the Aeroquip Crimp Hydraulic Hose Fittings with JIC Connection?▾
Where is the Kurt Crimp Hydraulic Hose Fittings with JIC Connection made, and can you export it from Dubai?▾
Is the Kurt Crimp Hydraulic Hose Fittings with JIC Connection available ex-stock from Dubai?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
From the blog
Written about this range
Thread & fitting identification
Measuring a fitting without gauges: what you can establish in the field
No seat gauge, no pitch gauge, a machine down and a phone with two bars. What a caliper and a known bolt will actually tell you, and what to send.
4 min read
Assembly, crimping & certification
JIC, ORFS and NPT hose fittings: inch-thread hose ends, drop lengths and how they seal
Most hose assemblies on American and many Asian machines end in one of three inch-thread connections: a JIC 37° swivel, an ORFS swivel with an O-ring in the face, or a pipe thread. Each has its standard (ISO 12151-5, -1 and SAE J516), its seal and its trap — a 45° SAE flare that threads onto a JIC and leaks, an NPSM swivel on a nipple with no 30° seat. The inch hose-end range, including compact and long-drop elbows, and how to order an assembly with two elbows.
4 min read
Specification & standards
Where JIC is the wrong choice
JIC is the default on most of this continent and it deserves to be. It is also the wrong answer in four specific situations, and every one of them is a situation where people keep specifying it anyway.
4 min read








