JIC Female Thrust Wire Nut Hose Fitting

JIC female fitting with thrust wire nut — wire-retained nut for service-friendly disassembly. straight, UN/UNF, Thrust wire nut (specialty mechanical retention).
Key features
- Fitting Configuration: straight
- Thread Form: UN/UNF
- Sealing Form: Thrust wire nut (specialty mechanical retention)
- Nominal Size Range: -04 to -24
- Fitting Configuration
- straight
- Thread Form
- UN/UNF
- Sealing Form
- Thrust wire nut (specialty mechanical retention)
- Nominal Size Range
- -04 to -24
Product description
The JIC Female Thrust Wire Nut Hose Fitting is a straight hydraulic hose fitting in the JIC 37° family — female-swivel thread with Thrust wire nut (specialty mechanical retention) sealing form. Compliant with SAE J514.
Construction
- Configuration: straight
- Thread form: UN/UNF
- Sealing form: Thrust wire nut (specialty mechanical retention)
- Gender: female-swivel
- Material: Carbon steel (stainless steel available on request)
- Surface treatment: Zinc-plated, Cr3+ passivated, RoHS-compliant
- Notes: Thrust wire nut = wire-retained swivel nut, allowing repeated assembly without thread wear
Performance
Pressure rating matches the matching ferrule and host hose grade — see Indus Crimp Ferrules for compatibility tables. Tested to manufacturer-recommended impulse cycles when crimped to the correct ferrule diameter. Operating temperature -40°C to +120°C; refer to fluid compatibility chart for aggressive media.
Applicable Standards
- SAE J514
How to order
Specify (a) the host hose grade and bore size, (b) the matching crimp ferrule (see the Crimp Ferrules category), and (c) the thread size you need. Indus crimps and pressure-tests the assembly before dispatch.
Companion products
Pair with Indus crimp ferrules from the matching hose grade. For other thread families see the Metric, BSP, JIC 37°, DIN, and Japanese sub-categories under Hose Fittings.
Identification
| Parameter | Value |
|---|---|
| Fitting Configuration | straight |
| Thread Form | UN/UNF |
| Sealing Form | Thrust wire nut (specialty mechanical retention) |
| Thread Gender | female-swivel |
Dimensions
| Parameter | Value |
|---|---|
| Nominal Size Range | -04 to -24 |
Construction
| Parameter | Value |
|---|---|
| Material | Carbon steel (stainless on request) |
| Surface Treatment | Zinc-plated, Cr3+ passivated, RoHS-compliant |
Compliance
| Parameter | Value |
|---|---|
| Applicable Standards | SAE J514 |
Shipping & lead time
What is the JIC Female Thrust Wire Nut Hose Fitting used for?▾
How do I specify the right size when ordering the JIC Female Thrust Wire Nut Hose Fitting?▾
Which sizes are listed for the JIC Female Thrust Wire Nut Hose Fitting?▾
Which JIC Female Thrust Wire Nut Hose Fitting do I need for my hose and port?▾
What is the working pressure of the JIC Female Thrust Wire Nut Hose Fitting?▾
What material and finish does the JIC Female Thrust Wire Nut Hose Fitting have?▾
Does the JIC Female Thrust Wire Nut Hose Fitting meet SAE J514, and what documents are available?▾
What does the JIC Female Thrust Wire Nut Hose Fitting connect to?▾
How should the JIC Female Thrust Wire Nut Hose Fitting be installed?▾
How does the JIC Female Thrust Wire Nut Hose Fitting differ from the JIC Female 37° Seat Slip-on Nut Hose Fitting?▾
Where is the JIC Female Thrust Wire Nut Hose Fitting made, and can you export it from Dubai?▾
Do you have the JIC Female Thrust Wire Nut Hose Fitting in stock in Dubai?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
The same part, in the designations used across European and Gulf trade catalogues.
- de
- gerade JIC Innengewinde Schlaucharmatur
- fr
- femelle JIC embout de flexible
- es
- hembra JIC racor de manguera
- it
- femmina JIC raccordo per tubo flessibile
From the blog
Written about this range
Thread & fitting identification
Measuring a fitting without gauges: what you can establish in the field
No seat gauge, no pitch gauge, a machine down and a phone with two bars. What a caliper and a known bolt will actually tell you, and what to send.
4 min read
Assembly, crimping & certification
JIC, ORFS and NPT hose fittings: inch-thread hose ends, drop lengths and how they seal
Most hose assemblies on American and many Asian machines end in one of three inch-thread connections: a JIC 37° swivel, an ORFS swivel with an O-ring in the face, or a pipe thread. Each has its standard (ISO 12151-5, -1 and SAE J516), its seal and its trap — a 45° SAE flare that threads onto a JIC and leaks, an NPSM swivel on a nipple with no 30° seat. The inch hose-end range, including compact and long-drop elbows, and how to order an assembly with two elbows.
4 min read
Specification & standards
Where JIC is the wrong choice
JIC is the default on most of this continent and it deserves to be. It is also the wrong answer in four specific situations, and every one of them is a situation where people keep specifying it anyway.
4 min read







