Aeroquip GH793 MatchMate Hydraulic Hoses

Aeroquip GH793 MatchMate Hydraulic Hoses, 1/4" to 1": 5 part numbers.
Product description
Aeroquip GH793 MatchMate Hydraulic Hoses, 1/4" to 1": 5 part numbers.
Specification
- Type: Bulk Hose
- Size range: 1/4" to 1"
- Pressure stated by the maker: 3,000 to 6,500 psi (207 to 448 bar), by size
- Temperature: -40°F to +260°F
- Cover Material: Synthetic Rubber
- Part numbers: 5
Sizes and part numbers
The Sizes & Part Numbers tab lists every Aeroquip part number in this range with its ratings. Ratings vary by size — check the row for the part you order.
Choosing the hose
Select hose on working pressure, bore, temperature and fluid. The working pressure in the size table is the maximum for continuous duty; burst pressure is a test figure, not a working limit. End fittings must be from the series the hose maker approves for that hose.
How to order
Quote the Aeroquip part number. Price and lead time are confirmed with the quotation.
Specifications
| Parameter | Value |
|---|---|
| Compatible Chemicals | Air, Automatic Transmission Fluid, Diesel Fuel, Ethylene Glycol, Fresh Water, Fuel Oil, Gasoline, Hydraulic Fluid (Petroleum), Hydraulic Fluid (Synthetic), Kerosene, Lithium Grease, Lubricated Air, Mi |
| Cover Material | Synthetic Rubber |
| Hose Color | Black |
| Hose Configuration | Bulk Hose |
| Safety Factor | 4:1 |
| Tube Material | Synthetic Rubber |
| Type | Hydraulic |
Shipping & lead time
Sizes & part numbers
5 sizes- Eaton Aeroquip part no.GH793-16-50
- Description
- Hydraulic Hose, 3000 psi, 1 Inch Hose I.D., 2 35/64 Inch Hose O.D., 50 ft Hose Lg
- Hose bore
- -16 · 1"
- Min bend radius (mm)
- 304.8
- Working pressure (bar)
- 207
- Eaton Aeroquip part no.GH793-8-50
- Description
- Hydraulic Hose, 5000 psi, 1/2 Inch Hose I.D., 2 5/32 Inch Hose O.D., 50 ft Hose Lg
- Hose bore
- -08 · 1/2"
- Min bend radius (mm)
- 177.8
- Working pressure (bar)
- 345
- Eaton Aeroquip part no.GH793-4-50
- Description
- Hydraulic Hose, 6500 psi, 1/4 Inch Hose I.D., 2 5/32 Inch Hose O.D., 50 ft Hose Lg
- Hose bore
- -04 · 1/4"
- Min bend radius (mm)
- 101.6
- Working pressure (bar)
- 448
- Eaton Aeroquip part no.GH793-12-50
- Description
- Hydraulic Hose, 3500 psi, 3/4 Inch Hose I.D., 2 33/64 Inch Hose O.D., 50 ft Hose Lg
- Hose bore
- -12 · 3/4"
- Min bend radius (mm)
- 241.3
- Working pressure (bar)
- 241
- Eaton Aeroquip part no.GH793-10-50
- Description
- Bulk Hose 5/8 Inch Id x 50 Feet 3625 Psi
- Hose bore
- -10 · 5/8"
- Min bend radius (mm)
- 203.2
- Working pressure (bar)
- 276
Description — What this part number is, as the manufacturer lists it. Min bend radius — Tightest centreline radius the hose may be bent to at full working pressure.
Working pressure is the published rating for the hose itself. A made-up assembly is limited by its lowest-rated part, so check it against the coupling, the clamp or ferrule, and the temperature you are running at.
Cut lengths and made-up assemblies are prepared in Dubai. Tell us the bore, the length and the ends you need.
What is the Aeroquip GH793 MatchMate Hydraulic Hoses used for?▾
Which sizes does the Aeroquip GH793 MatchMate Hydraulic Hoses come in?▾
What does part number GH793-4-50 of the Aeroquip GH793 MatchMate Hydraulic Hoses cover?▾
What is the working pressure of the Aeroquip GH793 MatchMate Hydraulic Hoses?▾
What temperatures and fluids suit the Aeroquip GH793 MatchMate Hydraulic Hoses?▾
Which standard does the Aeroquip GH793 MatchMate Hydraulic Hoses meet?▾
Which fittings and ferrules do I use on the Aeroquip GH793 MatchMate Hydraulic Hoses?▾
How should I route the Aeroquip GH793 MatchMate Hydraulic Hoses and what is the minimum bend radius?▾
How do I match the size of the Aeroquip GH793 MatchMate Hydraulic Hoses to my old hose?▾
Aeroquip GH793 MatchMate Hydraulic Hoses or Aeroquip Danfoss GH793 Series Rubber Hydraulic Braided Hoses: which should I choose?▾
Where is the Aeroquip GH793 MatchMate Hydraulic Hoses made and what is its HS code?▾
Do you stock the Aeroquip GH793 MatchMate Hydraulic Hoses in Dubai?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
From the blog
Written about this range
Machine down
Detaching a hose on a modern machine: guards, clips and the ones that fight back
On a machine built in the last fifteen years, getting to the hose takes longer than changing it. Most of that time is spent undoing things nobody photographed.
5 min read
Procurement & export
Bulk hose by the metre, or finished assemblies?
Buying hose on a reel and crimping your own looks cheaper and sometimes is. The decision turns on whether you can state a crimp diameter and prove you hit it.
3 min read
Failure analysis
Cover blistering and pinholes: usually permeation, not a defect
A bubble under the cover looks like a manufacturing fault and normally is not. It is gas that got through the tube and could not get out through the cover — which tells you something specific about the fluid and the duty.
4 min read








