Aeroquip FC300 Bulk Hydraulic Hoses

Aeroquip FC300 Bulk Hydraulic Hoses, 1/4" to 1 1/8": 5 part numbers.
Product description
Aeroquip FC300 Bulk Hydraulic Hoses, 1/4" to 1 1/8": 5 part numbers.
Specification
- Type: Bulk Hose
- Size range: 1/4" to 1 1/8"
- Pressure stated by the maker: 625 to 1,750 psi (43 to 121 bar), by size
- Temperature: -40°F to +302°F
- Cover Material: Polyester
- Part numbers: 5
Sizes and part numbers
The Sizes & Part Numbers tab lists every Aeroquip part number in this range with its ratings. Ratings vary by size — check the row for the part you order.
Choosing the hose
Select hose on working pressure, bore, temperature and fluid. The working pressure in the size table is the maximum for continuous duty; burst pressure is a test figure, not a working limit. End fittings must be from the series the hose maker approves for that hose.
How to order
Quote the Aeroquip part number. Price and lead time are confirmed with the quotation.
Specifications
| Parameter | Value |
|---|---|
| Compatible Chemicals | Air, Automatic Transmission Fluid, Brake Fluid, Diesel Fuel, Ethylene Glycol, Fresh Water, Fuel Oil, Gasoline, Hydraulic Fluid (Petroleum), Hydraulic Fluid (Synthetic), Kerosene, Lithium Grease, Lubri |
| Cover Material | Polyester |
| Hose Color | Blue |
| Hose Configuration | Bulk Hose |
| Hose Tube Material | Aqp Elastomer |
| Safety Factor | 4:1 |
| Tube Material | Polyethylene |
| Type | Hydraulic |
Shipping & lead time
Sizes & part numbers
5 sizes- Eaton Aeroquip part no.FC300-10-25
- Description
- Bulk Hose 1/2 Inch Id x 25 Feet 1750 Psi
- Hose bore
- -10 · 1/2"
- Min bend radius (mm)
- 139.7
- Working pressure (bar)
- 121
- Eaton Aeroquip part no.FC300-05-25
- Description
- Hydraulic Hose, 3000 psi, 1/4 Inch Hose I.D., 37/64 Inch Hose O.D., 25 ft Hose Lg, Blue
- Hose bore
- -05 · 1/4"
- Min bend radius (mm)
- —
- Working pressure (bar)
- 207
- Eaton Aeroquip part no.FC300-12-25
- Description
- Bulk Hose 5/8 Inch Id x 25 Feet 1500 Psi
- Hose bore
- -12 · 5/8"
- Min bend radius (mm)
- 165.1
- Working pressure (bar)
- 103
- Eaton Aeroquip part no.FC300-16-25
- Description
- Hydraulic Hose, 800 psi, 7/8 Inch Hose I.D., 2 39/64 Inch Hose O.D., 25 ft Hose Lg
- Hose bore
- -16 · 7/8"
- Min bend radius (mm)
- 187.3
- Working pressure (bar)
- 55
- Eaton Aeroquip part no.FC300-20-25
- Description
- Hydraulic Hose, 625 psi, 1 1/8 Inch Hose I.D., 2 21/32 Inch Hose O.D., 25 ft Hose Lg
- Hose bore
- -20 · 1 1/8"
- Min bend radius (mm)
- 228.6
- Working pressure (bar)
- 43
Description — What this part number is, as the manufacturer lists it. Min bend radius — Tightest centreline radius the hose may be bent to at full working pressure.
Working pressure is the published rating for the hose itself. A made-up assembly is limited by its lowest-rated part, so check it against the coupling, the clamp or ferrule, and the temperature you are running at.
Cut lengths and made-up assemblies are prepared in Dubai. Tell us the bore, the length and the ends you need.
What is the Aeroquip FC300 Bulk Hydraulic Hoses used for?▾
Which sizes does the Aeroquip FC300 Bulk Hydraulic Hoses come in?▾
What does part number FC300-12-25 of the Aeroquip FC300 Bulk Hydraulic Hoses cover?▾
What is the working pressure of the Aeroquip FC300 Bulk Hydraulic Hoses?▾
What temperatures and fluids suit the Aeroquip FC300 Bulk Hydraulic Hoses?▾
Which standard does the Aeroquip FC300 Bulk Hydraulic Hoses meet?▾
Which fittings and ferrules do I use on the Aeroquip FC300 Bulk Hydraulic Hoses?▾
How should I route the Aeroquip FC300 Bulk Hydraulic Hoses and what is the minimum bend radius?▾
How do I match the size of the Aeroquip FC300 Bulk Hydraulic Hoses to my old hose?▾
Aeroquip FC300 Bulk Hydraulic Hoses or Aeroquip Bulk Hydraulic Hoses: which should I choose?▾
Where is the Aeroquip FC300 Bulk Hydraulic Hoses made and what is its HS code?▾
Do you stock the Aeroquip FC300 Bulk Hydraulic Hoses in Dubai?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
From the blog
Written about this range
Machine down
Detaching a hose on a modern machine: guards, clips and the ones that fight back
On a machine built in the last fifteen years, getting to the hose takes longer than changing it. Most of that time is spent undoing things nobody photographed.
5 min read
Procurement & export
Bulk hose by the metre, or finished assemblies?
Buying hose on a reel and crimping your own looks cheaper and sometimes is. The decision turns on whether you can state a crimp diameter and prove you hit it.
3 min read
Failure analysis
Cover blistering and pinholes: usually permeation, not a defect
A bubble under the cover looks like a manufacturing fault and normally is not. It is gas that got through the tube and could not get out through the cover — which tells you something specific about the fluid and the duty.
4 min read








