Skip to content
Anchor chain & mooring

Anchor chain size chart: proof and breaking loads for every grade, in mm and inches

Proof and breaking loads for stud link anchor chain in grades U1, U2 and U3 from 12.5 to 137 mm, and for offshore mooring chain in grades ORQ, R3, R3S, R4, R4S and R5 from 36 to 205 mm, stud link and studless — with the inch size beside every metric one and the formula behind them.

Written by
Ayush Bhatia, Director
Published
Updated
Reading
13 min · 5 sections
Share
Sample lengths of stud link anchor chain on a factory floor, laid side by side from small to very large diameters
Chain size is the bar diameter of a common link — and proof and breaking loads climb steeply with it.

At a glance

Key takeaways

  1. Anchor chain is sized by the nominal diameter of the common link — the bar it is made from — in mm, with an inch equivalent: 76 mm is 3″.
  2. Grade sets the strength: at 76 mm a U2 stud link chain breaks at 3,010 kN, U3 at 4,300 kN and offshore R4 at 6,001 kN.
  3. Proof load is applied to every length before delivery; breaking load is proven on samples. Proof is about 70% of break for U2 and U3.
  4. Stud link and studless chain of the same offshore grade have the same breaking load. From R3S up, studless chain is proof tested to a lower load.
  5. All of these loads come from one IACS formula, so any size can be checked: F = c × d² × (44 − 0.08d) kN.

Figures verified · Loads from our live listings, which follow the IACS UR W18 and W22 test-load formula; checked against two makers’ published tables. The classification society’s rules govern.

An anchor chain is ordered by three numbers: its diameter, its grade and its length. This chart gives the first two — the proof load every shot is tested to and the minimum breaking load it must reach — for every size and grade we list, ship anchor chain and offshore mooring chain alike. The metric size is the one the certificate carries; the inch size is the one many older drawings and windlass plates still use.

/01Reading the chart.

Four things to know before using the tables:

  • Size is the nominal diameter of the common link. Enlarged links, end links and shackles are bigger, but they are ordered by the chain size they fit.
  • Proof load is the test load applied to the full length of every shot after heat treatment. The chain must carry it without cracks or permanent stretch beyond the class limits.
  • Breaking load is a minimum, proven by pulling sample lengths to that load without failure. It is not a working load.
  • kN to tonnes: divide by 9.81. 3,010 kN is about 307 tonnes-force.
IACS UR W18 / W22International Association of Classification SocietiesTest load tables

Anchor chain cables and accessories including chafing chain for emergency towing arrangements (W18); Offshore mooring chain (W22)

Both requirements give proof and breaking test loads as F = c × d² × (44 − 0.08d) kN, with d the nominal diameter in mm. The constant c is fixed per grade: for breaking load 0.0098 (U1), 0.0137 (U2), 0.0196 (U3), 0.0211 (ORQ), 0.0223 (R3), 0.0249 (R3S), 0.0274 (R4), 0.0304 (R4S) and 0.0320 (R5). Each classification society adopts these values in its own rules.

/02Ship anchor chain, grades U1 to U3.

Stud link anchor chain from 12.5 to 137 mm, from our stud link anchor chain listing. U1 is mild steel and rarely specified now; U2 is the usual merchant-ship grade and U3 the special-quality grade for larger ships and where the rules let a smaller U3 replace a bigger U2. Above 137 mm, loads are quoted per order.

Stud link anchor chain — proof and breaking loads (kN)
mminchProof U1Proof U2Proof U3Break U1Break U2Break U3
12.51/2″4666926692132
149/16″588211682116165
165/8″76107150107150216
17.511/16″89127179127179256
193/4″105150211150211301
20.513/16″123175244175244349
227/8″140200280200280401
2415/16″167237332237332476
261-1/16″194278389278389556
281-1/8″225321449321449642
301-3/16″257368514368514735
321-1/4″291417583417583833
341-5/16″328468655468655937
361-7/16″3665237325237321,050
381-1/2″4065818125818121,160
401-9/16″4486408966408961,280
421-5/8″4927039817039811,400
441-3/4″5387691,0807691,0801,540
461-13/16″5858371,1708371,1701,680
481-7/8″6359081,2709081,2701,810
502″6869811,3709811,3701,960
522-1/16″7391,0601,4801,0601,4802,110
542-1/8″7941,1401,5901,1401,5902,270
562-3/16″8511,2201,7101,2201,7102,430
582-5/16″9091,2901,8101,2901,8102,600
602-3/8″9691,3801,9401,3801,9402,770
622-7/16″1,0301,4702,0601,4702,0602,940
642-1/2″1,1001,5602,1901,5602,1903,130
662-5/8″1,1601,6602,3101,6602,3103,300
682-11/16″1,2301,7502,4501,7502,4503,500
702-3/4″1,2901,8402,5801,8402,5803,690
732-7/8″1,3901,9902,7901,9902,7903,990
763″1,5002,1503,0102,1503,0104,300
783-1/16″1,5802,2603,1602,2603,1604,500
813-3/16″1,6902,4103,3802,4103,3804,820
843-5/16″1,8002,5803,6102,5803,6105,160
873-7/16″1,9202,7503,8502,7503,8505,500
903-9/16″2,0502,9204,0902,9204,0905,840
923-5/8″2,1303,0404,2603,0404,2606,080
953-3/4″2,2603,2304,5103,2304,5106,440
973-13/16″2,3403,3404,6803,3404,6806,690
1003-15/16″2,4703,5304,9403,5304,9407,060
1024″2,5603,6605,1203,6605,1207,320
1054-1/8″2,7003,8505,3903,8505,3907,700
1074-3/16″2,7903,9805,5703,9805,5707,960
1114-3/8″2,9704,2505,9404,2505,9408,480
1144-1/2″3,1104,4406,2304,4406,2308,890
1174-5/8″3,2604,6506,5104,6506,5109,300
1204-3/4″3,4004,8506,8104,8506,8109,720
1224-13/16″3,5005,0007,0005,0007,0009,990
1244-7/8″3,6005,1407,2005,1407,20010,280
1275″3,7505,3507,4905,3507,49010,710
1305-1/8″3,9005,5707,8005,5707,80011,140
1325-3/16″4,0005,7208,0005,7208,00011,420
1375-3/8″4,2606,0808,5106,0808,51012,160

Notice that U2’s proof load equals U1’s breaking load, and U3’s proof load equals U2’s breaking load, size for size. That is not a coincidence of rounding: the constants were set so each grade proves itself at the strength of the grade below. Studless ship chain in the same grades is listed separately, as studless anchor chain, with lower test loads.

/03Offshore mooring chain — breaking loads.

Offshore mooring chain from 36 to 205 mm in the six grades of IACS W22. The breaking load is the same for stud link and studless chain of the same grade and size. Listings: stud link mooring chain and studless mooring chain (to 162 mm). Sizes above 162 mm are metric only.

Offshore mooring chain — minimum breaking load (kN), stud link and studless
mminchORQR3R3SR4R4SR5
361-7/16″1,1241,1881,3271,4601,6201,705
381-1/2″1,2481,3191,4731,6211,7981,893
401-9/16″1,3771,4561,6251,7891,9852,089
421-5/8″1,5131,5991,7851,9642,1792,294
441-3/4″1,6541,7481,9512,1472,3822,508
461-13/16″1,8001,9032,1242,3382,5942,730
481-7/8″1,9522,0632,3042,5352,8132,961
502″2,1102,2302,4902,7403,0403,200
522-1/16″2,2732,4022,6822,9523,2753,447
542-1/8″2,4412,5802,8813,1703,5173,703
562-3/16″2,6152,7643,0863,3963,7683,966
582-5/16″2,7942,9533,2973,6284,0254,237
602-3/8″2,9783,1473,5143,8674,2904,516
622-7/16″3,1663,3473,7374,1124,5624,802
642-1/2″3,3603,5513,9654,3644,8415,096
662-5/8″3,5593,7614,2004,6215,1275,397
682-11/16″3,7623,9764,4404,8855,4205,706
702-3/4″3,9704,1964,6855,1565,7206,021
732-7/8″4,2914,5355,0645,5726,1826,507
763″4,6214,8845,4546,0016,6587,009
783-1/16″4,8475,1235,7206,2956,9847,351
813-3/16″5,1945,4906,1306,7457,4847,877
843-5/16″5,5505,8666,5507,2087,9978,418
873-7/16″5,9166,2526,9817,6828,5238,971
903-9/16″6,2896,6477,4228,1679,0629,539
923-5/8″6,5446,9167,7228,4979,4289,924
953-3/4″6,9327,3268,1809,0019,98710,512
973-13/16″7,1957,6048,4909,34310,36610,911
1003-15/16″7,5968,0288,9649,86410,94411,520
1024″7,8688,3159,28510,21711,33611,932
1054-1/8″8,2828,7539,77310,75411,93212,560
1074-3/16″8,5619,04810,10311,11812,33512,984
1114-3/8″9,1309,65010,77511,85613,15413,847
1144-1/2″9,56510,10911,28712,42013,78014,506
1174-5/8″10,00510,57411,80712,99314,41515,174
1204-3/4″10,45211,04712,33413,57315,05915,852
1224-13/16″10,75311,36512,69013,96415,49316,308
1244-7/8″11,05711,68613,04814,35815,93016,768
1275″11,51612,17113,59114,95516,59217,466
1305-1/8″11,98112,66314,13915,55917,26218,171
1325-3/16″12,29412,99314,50815,96517,71318,645
1375-3/8″13,08513,82915,44116,99218,85219,844
1425-5/8″13,88714,67716,38818,03320,00821,061
1475-3/4″14,70015,53617,34719,08921,17922,294
1526″15,52216,40518,31720,15622,36323,540
1576-3/16″16,35217,28219,29721,23423,55924,799
1626-3/8″17,18818,16620,28422,32024,76426,068
165—17,69318,69920,87922,97625,49126,833
168—18,19919,23421,47723,63326,22127,601
171—18,70719,77122,07624,29226,95228,371
175—19,38620,48822,87725,17427,93029,400
178—19,89621,02723,47925,83628,66530,173
180—20,23621,38723,88026,27829,15530,689
185—21,08722,28624,88427,38330,38131,980
188—21,59722,82525,48728,04631,11632,754
191—22,10723,36426,08928,70831,85133,527
194—22,61723,90326,69029,36932,58534,300
197—23,12524,44027,29030,02933,31735,071
200—23,63224,97627,88830,68834,04835,840
205—24,47425,86628,88131,78135,26137,116

/04Offshore mooring chain — proof loads.

Proof loads differ between the two types from R3S upward, because a studless link deforms more under load than one held open by a stud. For ORQ and R3 the two are tested alike.

Stud link offshore mooring chain — proof load (kN)
mminchORQR3R3SR4R4SR5
361-7/16″7468319591,1511,2791,338
381-1/2″8289231,0651,2781,4201,485
401-9/16″9141,0181,1751,4101,5671,639
421-5/8″1,0041,1181,2901,5481,7211,799
441-3/4″1,0971,2231,4111,6931,8811,967
461-13/16″1,1941,3311,5361,8432,0482,141
481-7/8″1,2951,4431,6661,9992,2212,322
502″1,4001,5601,8002,1602,4002,510
522-1/16″1,5081,6811,9392,3272,5852,704
542-1/8″1,6201,8052,0832,4992,7772,904
562-3/16″1,7351,9332,2312,6772,9743,111
582-5/16″1,8542,0662,3832,8603,1783,323
602-3/8″1,9762,2012,5403,0483,3873,542
622-7/16″2,1012,3412,7013,2423,6023,767
642-1/2″2,2302,4842,8673,4403,8223,997
662-5/8″2,3612,6313,0363,6434,0484,233
682-11/16″2,4962,7823,2093,8514,2794,475
702-3/4″2,6342,9353,3874,0644,5164,723
732-7/8″2,8473,1723,6604,3924,8815,104
763″3,0663,4173,9424,7315,2575,498
783-1/16″3,2163,5844,1354,9625,5145,766
813-3/16″3,4463,8404,4315,3175,9086,179
843-5/16″3,6834,1044,7355,6826,3136,602
873-7/16″3,9254,3745,0466,0566,7297,037
903-9/16″4,1734,6505,3656,4397,1547,482
923-5/8″4,3424,8385,5826,6997,4437,784
953-3/4″4,5995,1255,9137,0967,8848,246
973-13/16″4,7745,3196,1387,3658,1848,559
1003-15/16″5,0405,6166,4807,7768,6409,036
1024″5,2205,8176,7128,0548,9499,359
1054-1/8″5,4956,1237,0658,4789,4209,851
1074-3/16″5,6816,3307,3048,7649,73810,184
1114-3/8″6,0586,7507,7899,34710,38510,861
1144-1/2″6,3467,0718,1599,79110,87911,378
1174-5/8″6,6397,3978,53510,24211,38011,902
1204-3/4″6,9357,7288,91610,70011,88912,434
1224-13/16″7,1357,9509,17311,00812,23112,792
1244-7/8″7,3368,1759,43211,31912,57613,153
1275″7,6418,5159,82411,78913,09913,700
1305-1/8″7,9508,85810,22112,26513,62814,253
1325-3/16″8,1579,08910,48812,58513,98414,625
1375-3/8″8,6829,67411,16213,39514,88315,565
1425-5/8″9,21410,26711,84714,21615,79616,520
1475-3/4″9,75310,86812,54015,04816,72017,487
1526″10,29911,47613,24115,89017,65518,464
1576-3/16″10,85012,08913,94916,73918,59919,452
1626-3/8″11,40512,70814,66317,59619,55120,447
165—11,73913,08115,09418,11220,12521,047
168—12,07513,45515,52518,63120,70121,649
171—12,41213,83115,95919,15021,27822,253
175—12,86314,33216,53819,84522,05023,061
178—13,20114,70916,97220,36722,63023,667
180—13,42714,96117,26320,71523,01724,072
185—13,99115,59017,98921,58623,98525,084
188—14,33015,96818,42422,10924,56525,691
191—14,66816,34518,85922,63125,14626,298
194—15,00616,72119,29423,15225,72526,904
197—15,34417,09719,72723,67326,30327,509
200—15,68017,47220,16024,19226,88028,112
205—16,23818,09420,87825,05427,83729,113
Studless offshore mooring chain — proof load (kN)
mminchORQR3R3SR4R4SR5
361-7/16″7468319271,0231,1351,188
381-1/2″8289231,0291,1361,2601,319
401-9/16″9141,0181,1361,2531,3901,456
421-5/8″1,0041,1181,2471,3761,5271,599
441-3/4″1,0971,2231,3641,5051,6691,748
461-13/16″1,1941,3311,4851,6381,8171,903
481-7/8″1,2951,4431,6101,7771,9712,063
502″1,4001,5601,7401,9202,1302,230
522-1/16″1,5081,6811,8742,0682,2952,402
542-1/8″1,6201,8052,0132,2222,4652,580
562-3/16″1,7351,9332,1562,3802,6402,764
582-5/16″1,8542,0662,3042,5422,8202,953
602-3/8″1,9762,2012,4552,7103,0063,147
622-7/16″2,1012,3412,6112,8813,1963,347
642-1/2″2,2302,4842,7713,0583,3923,551
662-5/8″2,3612,6312,9353,2383,5933,761
682-11/16″2,4962,7823,1023,4233,7983,976
702-3/4″2,6342,9353,2743,6134,0084,196
732-7/8″2,8473,1723,5383,9044,3314,535
763″3,0663,4173,8114,2054,6654,884
783-1/16″3,2163,5843,9974,4114,8935,123
813-3/16″3,4463,8404,2834,7265,2435,490
843-5/16″3,6834,1044,5775,0515,6035,866
873-7/16″3,9254,3744,8785,3835,9726,252
903-9/16″4,1734,6505,1875,7236,3496,647
923-5/8″4,3424,8385,3965,9546,6066,916
953-3/4″4,5995,1255,7166,3076,9977,326
973-13/16″4,7745,3195,9336,5477,2637,604
1003-15/16″5,0405,6166,2646,9127,6688,028
1024″5,2205,8176,4887,1597,9428,315
1054-1/8″5,4956,1236,8297,5368,3608,753
1074-3/16″5,6816,3307,0607,7908,6439,048
1114-3/8″6,0586,7507,5298,3089,2179,650
1144-1/2″6,3467,0717,8878,7039,65510,109
1174-5/8″6,6397,3978,2519,10410,10010,574
1204-3/4″6,9357,7288,6199,51110,55111,047
1224-13/16″7,1357,9508,8689,78510,85511,365
1244-7/8″7,3368,1759,11810,06111,16111,686
1275″7,6418,5159,49710,47911,62612,171
1305-1/8″7,9508,8589,88010,90312,09512,663
1325-3/16″8,1579,08910,13811,18712,41112,993
1375-3/8″8,6829,67410,79011,90613,20913,829
1425-5/8″9,21410,26711,45212,63714,01914,677
1475-3/4″9,75310,86812,12213,37614,83915,536
1526″10,29911,47612,80014,12415,66916,405
1576-3/16″10,85012,08913,48414,87916,50717,282
1626-3/8″11,40512,70814,17415,64117,35118,166

/05Choosing a size.

For a ship, the chart is the last step, not the first: the rules give the chain diameter for each grade from the ship’s equipment number, and the chart then tells you what that chain is tested to. See how the equipment number sizes a ship’s anchors and chain. For an offshore mooring the diameter and grade come from the mooring analysis. For both, the shackles, swivels and links must match the chain’s grade — see the arrangement of a chain cable — and the weight of the cable decides what the windlass and locker must take: anchor chain weight per metre and per shot. The chain, its accessories and the anchors it serves are all in our marine equipment range.

Common questions

What size is 3 inch anchor chain in mm?
76 mm. Chain is made and certified to metric sizes; the inch figure is the nearest traditional equivalent.
What is the proof load of 76 mm U3 anchor chain?
3,010 kN, and its minimum breaking load is 4,300 kN.
Is the breaking load the safe working load?
No. It is the minimum load the chain must survive in a test. Working loads are set by the ship rules or the mooring design with large safety factors.
Do stud link and studless chain have the same strength?
Offshore chain of the same grade has the same minimum breaking load either way. From R3S up, studless chain is proof tested to a lower load. Studless ship chain is listed with lower loads than stud link.
How do I convert kN to tonnes?
Divide by 9.81 for tonnes-force. 1,000 kN is about 102 t.

Chain in this chart

What next

  1. 01
  2. 02

Need chain to a certificate?

Send the size, grade, type and number of shots, and the class society. We will quote the chain with a certificate for every shot.

Plant-down? Call +971 52 2477942 — 24/7

Keep reading

More on Anchor chain & mooring

All articles in this topic
Back to Blog