Sun Hydraulics Normally Closed, Modulating Element with Pilot Source from Port 1 and Integral T-8A Control Cavity — LRHA8

Sun Hydraulics normally closed modulating element with pilot source: LRHA8, series 3, 60 gpm (240 L/min), T-17A cavity. Authorised Sun Hydraulics distributor, UAE — supplied direct from Sun.
Key features
- Valve function: Normally Closed Modulating Element with Pilot Source
- Capacity: 60 gpm (240 L/min)
- Max operating pressure: 5000 psi (350 bar)
- Cavity: T-17A
- Valve function
- Normally Closed Modulating Element with Pilot Source
- Series (frame sizes)
- 3
- Cavity
- T-17A
Product description
A normally closed modulating element with an internal orifice from port 1 to port 3, so it can work as the main stage of a relief valve controlled remotely by a pilot relief or pilot solenoid valve. The T-8A version carries its own pilot cavity.
Sizes and cavities
Sun Hydraulics builds this valve in 1 size. The series sets the cavity it screws into and its flow capacity:
- LRHA8 — series 3, T-17A cavity, 60 gpm (240 L/min)
Sun builds its cartridges in frame sizes called series, from the small series 0 to series 4. The series fixes the cavity the valve screws into, so every function in one series shares that cavity, and a larger series carries more flow. Choose the smallest series that passes your flow at an acceptable pressure drop, using the performance curves, then the configuration options for control, setting and seals. If you are replacing a valve, the model code stamped on it gives the series and function directly, and the seal kits listed further down fit that series.
Ratings
- Maximum operating pressure: 5000 psi (350 bar)
Configuration options
The letters after the base model code choose these options (shown for LRHA8; a size may add or drop a choice):
- Seal material: N — Buna-N, V — Viton
Selection notes
- All ports accept 5,000 psi (350 bar).
Where it is used
High-flow remotely or electronically controlled relief functions.
Installation and seal kits
Valve hex 1 1/4 in. (31,8 mm); installation torque 150 - 160 lbf ft (203 - 217 Nm). Replacement seal kits — series 3: Buna: 990017007, Polyurethane: 990017002, Viton: 990017006.
Ordering
Indus Hydraulics is an authorised Sun Hydraulics distributor in the UAE and supplies the range direct from Sun Hydraulics. Quote the base model and its configuration letters — for example LRHA8DN — or send us the flow, pressure and duty and we select the valve. We confirm the full ordering code with the quotation.
Performance
| Parameter | Value |
|---|---|
| Capacity | 60 gpm (240 L/min) |
| Max operating pressure | 5000 psi (350 bar) |
Identification
| Parameter | Value |
|---|---|
| Valve function | Normally Closed Modulating Element with Pilot Source |
| Series (frame sizes) | 3 |
| Cavity | T-17A |
Installation
| Parameter | Value |
|---|---|
| Valve hex size | 1 1/4 in. (31,8 mm) |
| Installation torque | 150 - 160 lbf ft (203 - 217 Nm) |
| Seal kits | series 3: Buna: 990017007, Polyurethane: 990017002, Viton: 990017006 |
Configuration
| Parameter | Value |
|---|---|
| Seal material | N — Buna-N, V — Viton |
Shipping & lead time
Sizes & part numbers
1 size- Sun Hydraulics part no.LRHA8
- Series
- 3
- Cavity
- T-17A
- Capacity
- 60 gpm / 240 L/min
- Max pressure
- 5000 psi / 350 bar
Series — Frame size the cartridge is built in, as the maker numbers it; one series shares one cavity size. Cavity — Cavity the cartridge screws into, as the maker designates it. Capacity — Rated flow capacity as published, in US and metric units. Max pressure — Maximum pressure as the maker publishes it, in psi and bar.
Part numbers are the maker’s base model codes. The full ordering code adds letters for the control, setting range, seal and material options, and we confirm it with the quotation. Capacity and pressure are the maker’s published ratings for the cartridge; check them against the cavity body and the rest of the circuit.
What is the Sun Hydraulics LRHA8 normally closed modulating element with pilot source used for?▾
Which sizes and versions does the Sun Hydraulics LRHA8 normally closed modulating element with pilot source come in?▾
How do I read the Sun Hydraulics model code LRHA8DN for the LRHA8 normally closed modulating element with pilot source?▾
What is the maximum operating pressure of the Sun Hydraulics LRHA8 normally closed modulating element with pilot source?▾
What flow capacity does the LRHA8 normally closed modulating element with pilot source have?▾
Which seal materials and body finishes does the Sun Hydraulics LRHA8 normally closed modulating element with pilot source come with?▾
Which cavity does the Sun Hydraulics LRHA8 normally closed modulating element with pilot source fit?▾
Which seal kit fits the Sun Hydraulics LRHA8 normally closed modulating element with pilot source?▾
How is the Sun Hydraulics LRHA8 normally closed modulating element with pilot source installed?▾
Where is the Sun Hydraulics LRHA8 normally closed modulating element with pilot source used?▾
Sun Hydraulics LRHA8 or LRBA, LRDA, LRFA, LRHA, LRJA: what is the difference?▾
Do you stock the Sun Hydraulics LRHA8 in Dubai?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations








