Sun Hydraulics Cartridge-Style Flow Meter Flow Control Valve — QMEH4

Sun Hydraulics cartridge-style flow meter: QMEH4, series 3, 50 gpm (200 L/min), T-16A cavity. Authorised Sun Hydraulics distributor, UAE — supplied direct from Sun.
Key features
- Valve function: Cartridge-Style Flow Meter
- Capacity: 50 gpm (200 L/min)
- Max operating pressure: 5000 psi (350 bar)
- Cavity: T-16A
- Valve function
- Cartridge-Style Flow Meter
- Series (frame sizes)
- 3
- Cavity
- T-16A
Product description
A variable-area flow meter in cartridge form. Oil passing from port 1 to port 2 is metered and reported as an electrical signal that rises with flow, so flow can be monitored inside a manifold with no inline meter.
Sizes and cavities
Sun Hydraulics builds this valve in 1 size. The series sets the cavity it screws into and its flow capacity:
- QMEH4 — series 3, T-16A cavity, 50 gpm (200 L/min)
Sun builds its cartridges in frame sizes called series, from the small series 0 to series 4. The series fixes the cavity the valve screws into, so every function in one series shares that cavity, and a larger series carries more flow. Choose the smallest series that passes your flow at an acceptable pressure drop, using the performance curves, then the configuration options for control, setting and seals. If you are replacing a valve, the model code stamped on it gives the series and function directly, and the seal kits listed further down fit that series.
Ratings
- Maximum operating pressure: 5000 psi (350 bar)
Configuration options
The letters after the base model code choose these options (shown for QMEH4; a size may add or drop a choice):
- Seal material: N — Buna-N, V — Viton
Selection notes
- Analogue output: 4–20 mA or 0.5–4.5 V.
- IP69K with a matching connector.
- Accuracy falls off with very viscous oil — see the data.
Where it is used
Condition monitoring, closed-loop speed control and test circuits.
Installation and seal kits
Valve hex 1 1/4 in. (31,8 mm); installation torque 150 - 160 lbf ft (203 - 217 Nm).
Ordering
Indus Hydraulics is an authorised Sun Hydraulics distributor in the UAE and supplies the range direct from Sun Hydraulics. Quote the base model and its configuration letters — for example QMEH4GN — or send us the flow, pressure and duty and we select the valve. We confirm the full ordering code with the quotation.
Performance
| Parameter | Value |
|---|---|
| Capacity | 50 gpm (200 L/min) |
| Max operating pressure | 5000 psi (350 bar) |
Identification
| Parameter | Value |
|---|---|
| Valve function | Cartridge-Style Flow Meter |
| Series (frame sizes) | 3 |
| Cavity | T-16A |
Installation
| Parameter | Value |
|---|---|
| Valve hex size | 1 1/4 in. (31,8 mm) |
| Installation torque | 150 - 160 lbf ft (203 - 217 Nm) |
| Weight | .62 lb |
Configuration
| Parameter | Value |
|---|---|
| Seal material | N — Buna-N, V — Viton |
Shipping & lead time
Sizes & part numbers
1 size- Sun Hydraulics part no.QMEH4
- Series
- 3
- Cavity
- T-16A
- Capacity
- 50 gpm / 200 L/min
- Max pressure
- 5000 psi / 350 bar
Series — Frame size the cartridge is built in, as the maker numbers it; one series shares one cavity size. Cavity — Cavity the cartridge screws into, as the maker designates it. Capacity — Rated flow capacity as published, in US and metric units. Max pressure — Maximum pressure as the maker publishes it, in psi and bar.
Part numbers are the maker’s base model codes. The full ordering code adds letters for the control, setting range, seal and material options, and we confirm it with the quotation. Capacity and pressure are the maker’s published ratings for the cartridge; check them against the cavity body and the rest of the circuit.
What is the Sun Hydraulics QMEH4 cartridge-style flow meter used for?▾
Which sizes and versions does the Sun Hydraulics QMEH4 cartridge-style flow meter come in?▾
How do I read the Sun Hydraulics model code QMEH4GN for the QMEH4 cartridge-style flow meter?▾
What is the maximum operating pressure of the Sun Hydraulics QMEH4 cartridge-style flow meter?▾
What flow capacity does the QMEH4 cartridge-style flow meter have?▾
Which seal materials and body finishes does the Sun Hydraulics QMEH4 cartridge-style flow meter come with?▾
Which cavity does the Sun Hydraulics QMEH4 cartridge-style flow meter fit?▾
Which seal kit fits the Sun Hydraulics QMEH4 cartridge-style flow meter?▾
How is the Sun Hydraulics QMEH4 cartridge-style flow meter installed?▾
Where is the Sun Hydraulics QMEH4 cartridge-style flow meter used?▾
Sun Hydraulics QMEH4 or FXAM: what is the difference?▾
Do you stock the Sun Hydraulics QMEH4 in Dubai?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations








