Sun Hydraulics Fixed-Orifice, Non-Pressure Compensated, Flow Control Valve with Reverse Flow Check — CNAC, CNCC, CNEC, CNGC, CNIC, Series 0 to 4

Sun Hydraulics fixed-orifice flow control with reverse check: CNAC, CNCC, CNEC, CNGC, CNIC, series 0 to 4, 7.5 gpm to 120 gpm (30 L/min to 480 L/min), T-162A, T-13A, T-5A, T-16A, T-18A cavities. Authorised Sun Hydraulics distributor, UAE — supplied direct from Sun.
Key features
- Valve function: Fixed-Orifice Flow Control with Reverse Check
- Capacity: 7.5 gpm to 120 gpm (30 L/min to 480 L/min)
- Max operating pressure: 5000 psi (350 bar)
- Cavity: T-162A, T-13A, T-5A, T-16A, T-18A
- Valve function
- Fixed-Orifice Flow Control with Reverse Check
- Series (frame sizes)
- 0 to 4
- Cavity
- T-162A, T-13A, T-5A, T-16A, T-18A
Product description
A fixed-orifice, non-compensated flow control: in effect a check valve with a bypass orifice. Flow through the orifice is restricted in one direction and free through the check in the other.
Sizes and cavities
Sun Hydraulics builds this valve in 5 sizes. The series sets the cavity it screws into and its flow capacity:
- CNAC — series 0, T-162A cavity, 7.5 gpm (30 L/min), 0-series
- CNCC — series 1, T-13A cavity, 15 gpm (60 L/min)
- CNEC — series 2, T-5A cavity, 30 gpm (120 L/min)
- CNGC — series 3, T-16A cavity, 60 gpm (240 L/min)
- CNIC — series 4, T-18A cavity, 120 gpm (480 L/min)
Sun builds its cartridges in frame sizes called series, from the small series 0 to series 4. The series fixes the cavity the valve screws into, so every function in one series shares that cavity, and a larger series carries more flow. Choose the smallest series that passes your flow at an acceptable pressure drop, using the performance curves, then the configuration options for control, setting and seals. If you are replacing a valve, the model code stamped on it gives the series and function directly, and the seal kits listed further down fit that series.
Ratings
- Maximum operating pressure: 5000 psi (350 bar)
Configuration options
The letters after the base model code choose these options (shown for CNCC; a size may add or drop a choice):
- Control: X — Not Adjustable
- Setting range: A — 4 psi (0,3 bar) Cracking Pressure, .016 - .153 in. (0,4 - 3,9 mm), B — 15 psi (1 bar) Cracking Pressure, .016 - .153 in. (0,4 - 3,9 mm), C — 30 psi (2 bar) Cracking Pressure, .016 - .153 in. (0,4 - 3,9 mm), D — 50 psi (3,5 bar) Cracking Pressure, .016 - .153 in. (0,4 - 3,9 mm), E — 75 psi (5 bar) Cracking Pressure, .016 - .153 in. (0,4 - 3,9 mm), F — 100 psi (7 bar) Cracking Pressure, .016 - .153 in. (0,4 - 3,9 mm), Z — 1 psi (0,07 bar) Cracking Pressure, .016 - .153 in. (0,4 - 3,9 mm)
- Seal material: N — Buna-N, V — Viton
- Material / coating: /AP — Stainless Steel, Passivated, /LH — Mild Steel, Zinc-Nickel
Option rules: EPDM seals are not allowed on modifier /AP or /LH; If the modifier is /AP, the control must be X; If the modifier is /LH, the control must be X.
Selection notes
- You specify the orifice diameter.
- Uses the same flow path as Sun's flow controls, so it fits flow-control manifolds.
Where it is used
Simple one-way speed control and damping.
Installation and seal kits
Valve hex 3/4 in. (19,1 mm), 7/8 in. (22,2 mm), 1 1/8 in. (28,6 mm), 1 1/4 in. (31,8 mm), 1 5/8 in. (41,3 mm); installation torque 20 - 25 lbf ft (27 - 33 Nm), 30 - 35 lbf ft (41 - 47 Nm), 45 - 50 lbf ft (61 - 68 Nm), 150 - 160 lbf ft (203 - 217 Nm), 350 - 375 lbf ft (474 - 508 Nm). Replacement seal kits — series 0: Buna: 990162007, Polyurethane: 990162002, Viton: 990162006; series 1: Buna: 990010007, Polyurethane: 990010002, Viton: 990010006; series 2: Buna: 990203007, Viton: 990203006; series 3: Buna: 990016007, Polyurethane: 990016002, Viton: 990016006; series 4: Buna: 990018007, Polyurethane: 990018002, Viton: 990018006.
Ordering
Indus Hydraulics is an authorised Sun Hydraulics distributor in the UAE and supplies the range direct from Sun Hydraulics. Quote the base model and its configuration letters — for example CNCCXCN — or send us the flow, pressure and duty and we select the valve. We confirm the full ordering code with the quotation.
Identification
| Parameter | Value |
|---|---|
| Valve function | Fixed-Orifice Flow Control with Reverse Check |
| Series (frame sizes) | 0 to 4 |
| Cavity | T-162A, T-13A, T-5A, T-16A, T-18A |
Performance
| Parameter | Value |
|---|---|
| Capacity | 7.5 gpm to 120 gpm (30 L/min to 480 L/min) |
| Max operating pressure | 5000 psi (350 bar) |
| Setting range | A — 4 psi (0,3 bar) Cracking Pressure, .016 - .153 in. (0,4 - 3,9 mm), B — 15 psi (1 bar) Cracking Pressure, .016 - .153 in. (0,4 - 3,9 mm), C — 30 psi (2 bar) Cracking Pressure, .016 - .153 in. (0,4 - 3,9 mm), D — 50 psi (3,5 bar) Cracking Pressure, .016 - .153 in. (0,4 - 3,9 mm), E — 75 psi (5 bar) Cracking Pressure, .016 - .153 in. (0,4 - 3,9 mm), F — 100 psi (7 bar) Cracking Pressure, .016 - .153 in. (0,4 - 3,9 mm), Z — 1 psi (0,07 bar) Cracking Pressure, .016 - .153 in. |
Configuration
| Parameter | Value |
|---|---|
| Control / adjustment | X — Not Adjustable |
| Seal material | N — Buna-N, V — Viton |
| Material / coating | /AP — Stainless Steel, Passivated, /LH — Mild Steel, Zinc-Nickel |
Installation
| Parameter | Value |
|---|---|
| Valve hex size | 3/4 in. (19,1 mm), 7/8 in. (22,2 mm), 1 1/8 in. (28,6 mm), 1 1/4 in. (31,8 mm), 1 5/8 in. (41,3 mm) |
| Installation torque | 20 - 25 lbf ft (27 - 33 Nm), 30 - 35 lbf ft (41 - 47 Nm), 45 - 50 lbf ft (61 - 68 Nm), 150 - 160 lbf ft (203 - 217 Nm), 350 - 375 lbf ft (474 - 508 Nm) |
| Seal kits | series 0: Buna: 990162007, Polyurethane: 990162002, Viton: 990162006; series 1: Buna: 990010007, Polyurethane: 990010002, Viton: 990010006; series 2: Buna: 990203007, Viton: 990203006; series 3: Buna: 990016007, Polyurethane: 990016002, Viton: 990016006; series 4: Buna: 990018007, Polyurethane: 990018002, Viton: 990018006 |
| Weight | .20 lb (0,10 kg) to 1.10 lb (0,50 kg) |
Shipping & lead time
Sizes & part numbers
5 sizes- Sun Hydraulics part no.CNAC
- Description
- 0-Series
- Series
- 0
- Cavity
- T-162A
- Capacity
- 7.5 gpm / 30 L/min
- Max pressure
- 5000 psi / 350 bar
- Sun Hydraulics part no.CNCC
- Description
- Standard
- Series
- 1
- Cavity
- T-13A
- Capacity
- 15 gpm / 60 L/min
- Max pressure
- 5000 psi / 350 bar
- Sun Hydraulics part no.CNEC
- Description
- Standard
- Series
- 2
- Cavity
- T-5A
- Capacity
- 30 gpm / 120 L/min
- Max pressure
- 5000 psi / 350 bar
- Sun Hydraulics part no.CNGC
- Description
- Standard
- Series
- 3
- Cavity
- T-16A
- Capacity
- 60 gpm / 240 L/min
- Max pressure
- 5000 psi / 350 bar
- Sun Hydraulics part no.CNIC
- Description
- Standard
- Series
- 4
- Cavity
- T-18A
- Capacity
- 120 gpm / 480 L/min
- Max pressure
- 5000 psi / 350 bar
Description — What this part number is, as the manufacturer lists it. Series — Frame size the cartridge is built in, as the maker numbers it; one series shares one cavity size. Cavity — Cavity the cartridge screws into, as the maker designates it. Capacity — Rated flow capacity as published, in US and metric units. Max pressure — Maximum pressure as the maker publishes it, in psi and bar.
Part numbers are the maker’s base model codes. The full ordering code adds letters for the control, setting range, seal and material options, and we confirm it with the quotation. Capacity and pressure are the maker’s published ratings for the cartridge; check them against the cavity body and the rest of the circuit.
What is the Sun Hydraulics CNAC, CNCC, CNEC, CNGC, CNIC fixed-orifice flow control with reverse check used for?▾
Which sizes and versions does the Sun Hydraulics CNAC, CNCC, CNEC, CNGC, CNIC fixed-orifice flow control with reverse check come in?▾
How do I read the Sun Hydraulics model code CNCCXCN for the CNAC, CNCC, CNEC, CNGC, CNIC fixed-orifice flow control with reverse check?▾
What is the maximum operating pressure of the Sun Hydraulics CNAC, CNCC, CNEC, CNGC, CNIC fixed-orifice flow control with reverse check?▾
What flow capacity does the Sun Hydraulics CNAC, CNCC, CNEC, CNGC, CNIC fixed-orifice flow control with reverse check have by series?▾
Which seal materials and body finishes does the Sun Hydraulics CNAC, CNCC, CNEC, CNGC, CNIC fixed-orifice flow control with reverse check come with?▾
Which cavity does the Sun Hydraulics CNAC, CNCC, CNEC, CNGC, CNIC fixed-orifice flow control with reverse check fit?▾
Which seal kit fits the Sun Hydraulics CNAC, CNCC, CNEC, CNGC, CNIC fixed-orifice flow control with reverse check?▾
How is the Sun Hydraulics CNAC, CNCC, CNEC, CNGC, CNIC fixed-orifice flow control with reverse check installed?▾
Where is the Sun Hydraulics CNAC, CNCC, CNEC, CNGC, CNIC fixed-orifice flow control with reverse check used?▾
Sun Hydraulics CNAC, CNCC, CNEC, CNGC, CNIC or FCBB to FCFB: what is the difference?▾
Do you stock the Sun Hydraulics CNAC, CNCC, CNEC, CNGC, CNIC in Dubai?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations








