Skip to content
SUN HYDRAULICSIH-SUN-NC-BCD

Sun Hydraulics Fully Adjustable Needle Valve with Reverse Flow Check — NCBB to NCGC, Series 0 to 4

Flow Control CartridgesEx-stock · delivery in 3 days
Sun Hydraulics NCCB needle valve, series 1, T-13A cavity — dimension drawing
VIEW 01·Sun Hydraulics NCCB needle valve, series 1, T-13A cavity — dimension drawing
1 / 3

Sun Hydraulics needle valve: NCBB to NCGC, series 0 to 4, 1 gpm (.06 inch) to 60 gpm (.56 inch) (4 L/min. (1,5 mm) to 240 L/min. (14,2 mm)), T-162A, T-13A, T-5A, T-16A, T-18A cavities. Authorised Sun Hydraulics distributor, UAE — supplied direct from Sun.

Key features

  • Valve function: Needle Valve
  • Capacity: 1 gpm (.06 inch) to 60 gpm (.56 inch) (4 L/min. (1,5 mm) to 240 L/min. (14,2 mm))
  • Max operating pressure: 5000 psi (350 bar)
  • Cavity: T-162A, T-13A, T-5A, T-16A, T-18A
Valve function
Needle Valve
Series (frame sizes)
0 to 4
Cavity
T-162A, T-13A, T-5A, T-16A, T-18A
Ships in 24h
Order before 14:00 GST · Jebel Ali
24-month warranty
Manufacturer-backed · genuine parts
Engineering support
A real applications engineer

Product description

A needle valve is a fully adjustable orifice: it opens from fully closed to its maximum orifice size and can also serve as a shut-off. It is not pressure compensated, so flow changes with the square root of the pressure drop. Versions with a reverse-flow check pass oil freely from port 2 to port 1.

Sizes and cavities

Sun Hydraulics builds this valve in 10 sizes. The series sets the cavity it screws into and its flow capacity:

  • NCBB — series 0, T-162A cavity, 5 gpm (.16 inch) (20 L/min. (4 mm)), 0-series
  • NCCD — series 1, T-13A cavity, 1 gpm (.06 inch) (4 L/min. (1,5 mm))
  • NCCC — series 1, T-13A cavity, 2 gpm (.09 inch) (8 L/min. (2,3 mm))
  • NCCB — series 1, T-13A cavity, 7 gpm (.19 inch) (28 L/min. (4,8 mm))
  • NCEC — series 2, T-5A cavity, 3 gpm (.13 inch) (11 L/min. (3,3 mm))
  • NCEB — series 2, T-5A cavity, 12 gpm (.25 inch) (45 L/min. (6,4 mm))
  • NCFC — series 3, T-16A cavity, 15 gpm (.28 inch) (60 L/min. (7,1 mm))
  • NCFB — series 3, T-16A cavity, 30 gpm (.38 inch) (120 L/min. (9,7 mm))
  • NCGC — series 4, T-18A cavity, 30 gpm (.38 inch) (120 L/min. (9,7 mm))
  • NCGB — series 4, T-18A cavity, 60 gpm (.56 inch) (240 L/min. (14,2 mm))

Sun builds its cartridges in frame sizes called series, from the small series 0 to series 4. The series fixes the cavity the valve screws into, so every function in one series shares that cavity, and a larger series carries more flow. Choose the smallest series that passes your flow at an acceptable pressure drop, using the performance curves, then the configuration options for control, setting and seals. If you are replacing a valve, the model code stamped on it gives the series and function directly, and the seal kits listed further down fit that series.

Ratings

  • Maximum operating pressure: 5000 psi (350 bar)
  • Maximum leakage: 10 drops/min. (0,7 cc/min), 5 drops/min. (0,3 cc/min)

Configuration options

The letters after the base model code choose these options (shown for NCCB; a size may add or drop a choice):

  • Control: L — Standard Screw Adjustment, H — Calibrated Handknob with Detent Lock, K — Handknob, R — Capped Screw Adjustment, Y — Tri-Grip Handknob, O — Handknob with Panel Mount
  • Seal material: N — Buna-N, L — Extended Temp. Buna, V — Viton, E — EPDM
  • Material / coating: /AP — Stainless Steel, Passivated, /LH — Mild Steel, Zinc-Nickel

Option rules: A modifier is required on control R; EPDM seals are not allowed on modifier /AP or /LH; If the modifier is /AP, the control must be L or R; If the modifier is /LH, the control must be L; If the seal is E, the control must be H,K,L,O or Y.

Selection notes

  • The sharp-edged orifice keeps flow changes with oil viscosity small.
  • A balanced adjustment turns easily even at high pressure.

Where it is used

Speed control of cylinders and motors where load is steady, bleed-off and gauge isolation.

Installation and seal kits

Valve hex 3/4 in. (19,1 mm), 7/8 in. (22,2 mm), 1 1/8 in. (28,6 mm), 1 1/4 in. (31,8 mm), 1 5/8 in. (41,3 mm); installation torque 20 - 25 lbf ft (27 - 33 Nm), 30 - 35 lbf ft (41 - 47 Nm), 45 - 50 lbf ft (61 - 68 Nm), 150 - 160 lbf ft (203 - 217 Nm), 350 - 375 lbf ft (474 - 508 Nm). Replacement seal kits — series 0: Buna: 990162007, Polyurethane: 990162002, Viton: 990162006; series 1: Buna: 990010007, Polyurethane: 990010002, Viton: 990010006, EPDM: 990010014; series 2: Buna: 990203007, Viton: 990203006, EPDM: 990203014; series 3: Buna: 990016007, Polyurethane: 990016002, Viton: 990016006, EPDM: 990016014; series 4: Buna: 990018007, Polyurethane: 990018002, Viton: 990018006, EPDM: 990018014.

Ordering

Indus Hydraulics is an authorised Sun Hydraulics distributor in the UAE and supplies the range direct from Sun Hydraulics. Quote the base model and its configuration letters — for example NCCBLCN — or send us the flow, pressure and duty and we select the valve. We confirm the full ordering code with the quotation.

Identification

ParameterValue
Valve functionNeedle Valve
Series (frame sizes)0 to 4
CavityT-162A, T-13A, T-5A, T-16A, T-18A

Performance

ParameterValue
Capacity1 gpm (.06 inch) to 60 gpm (.56 inch) (4 L/min. (1,5 mm) to 240 L/min. (14,2 mm))
Max operating pressure5000 psi (350 bar)
Max leakage10 drops/min. (0,7 cc/min), 5 drops/min. (0,3 cc/min)

Configuration

ParameterValue
Control / adjustmentL — Standard Screw Adjustment, H — Calibrated Handknob with Detent Lock, K — Handknob, R — Capped Screw Adjustment, Y — Tri-Grip Handknob, O — Handknob with Panel Mount
Seal materialN — Buna-N, L — Extended Temp. Buna, V — Viton, E — EPDM
Material / coating/AP — Stainless Steel, Passivated, /LH — Mild Steel, Zinc-Nickel

Installation

ParameterValue
Valve hex size3/4 in. (19,1 mm), 7/8 in. (22,2 mm), 1 1/8 in. (28,6 mm), 1 1/4 in. (31,8 mm), 1 5/8 in. (41,3 mm)
Installation torque20 - 25 lbf ft (27 - 33 Nm), 30 - 35 lbf ft (41 - 47 Nm), 45 - 50 lbf ft (61 - 68 Nm), 150 - 160 lbf ft (203 - 217 Nm), 350 - 375 lbf ft (474 - 508 Nm)
Seal kitsseries 0: Buna: 990162007, Polyurethane: 990162002, Viton: 990162006; series 1: Buna: 990010007, Polyurethane: 990010002, Viton: 990010006, EPDM: 990010014; series 2: Buna: 990203007, Viton: 990203006, EPDM: 990203014; series 3: Buna: 990016007, Polyurethane: 990016002, Viton: 990016006, EPDM: 990016014; series 4: Buna: 990018007, Polyurethane: 990018002, Viton: 990018006, EPDM: 990018014
Weight.20 lb (0,10 kg) to 3.00 lb (1,35 kg)

Shipping & lead time

Lead TimeEx-stock from Dubai — delivered within 3 working days in the UAE. Export orders ship on the lane stated for the destination.

Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations

RELATED · OFTEN PAIRED WITH

Engineers viewing this also looked at