Sun Hydraulics Fixed-Orifice Pressure Compensated Flow Control Valve with Reverse Flow Check — FCBB to FCFB, Series 0 to 4

Sun Hydraulics fixed-orifice pressure-compensated flow control valve: FCBB to FCFB, series 0 to 4, 3 gpm to 50 gpm (11 L/min to 200 L/min), T-162A, T-13A, T-5A, T-16A, T-18A cavities. Authorised Sun Hydraulics distributor, UAE — supplied direct from Sun.
Key features
- Valve function: Fixed-Orifice Pressure-Compensated Flow Control Valve
- Capacity: 3 gpm to 50 gpm (11 L/min to 200 L/min)
- Max operating pressure: 5000 psi (350 bar)
- Cavity: T-162A, T-13A, T-5A, T-16A, T-18A
- Valve function
- Fixed-Orifice Pressure-Compensated Flow Control Valve
- Series (frame sizes)
- 0 to 4
- Cavity
- T-162A, T-13A, T-5A, T-16A, T-18A
Product description
A pressure-compensated flow control with its flow set at the factory, for meter-in or meter-out speed control under changing pressure. Versions with a reverse-flow check pass return oil freely from port 2 to port 1.
Sizes and cavities
Sun Hydraulics builds this valve in 8 sizes. The series sets the cavity it screws into and its flow capacity:
- FCBB — series 0, T-162A cavity, 3 gpm (11 L/min), 0-series
- FCBC — series 0, T-162A cavity, 3 gpm (11 L/min), 0-series
- FCCB — series 1, T-13A cavity, 6 gpm (23 L/min)
- FCCC — series 1, T-13A cavity, 6 gpm (23 L/min)
- FCDB — series 2, T-5A cavity, 12 gpm (45 L/min)
- FCDC — series 2, T-5A cavity, 12 gpm (45 L/min)
- FCEB — series 3, T-16A cavity, 25 gpm (95 L/min)
- FCFB — series 4, T-18A cavity, 50 gpm (200 L/min)
Sun builds its cartridges in frame sizes called series, from the small series 0 to series 4. The series fixes the cavity the valve screws into, so every function in one series shares that cavity, and a larger series carries more flow. Choose the smallest series that passes your flow at an acceptable pressure drop, using the performance curves, then the configuration options for control, setting and seals. If you are replacing a valve, the model code stamped on it gives the series and function directly, and the seal kits listed further down fit that series.
Ratings
- Maximum operating pressure: 5000 psi (350 bar)
Configuration options
The letters after the base model code choose these options (shown for FCCC; a size may add or drop a choice):
- Control: C — Tamper Resistant - Factory Set, K — Handknob, L — Standard Screw Adjustment, X — Not Adjustable
- Setting range: A — .09 - .12 gpm (.34-.46 L/min.), .11 gpm (.4 L/min.) Standard Setting, B — .12 - .17 gpm (.47-.63 L/min.), .15 gpm (.55 L/min.) Standard Setting, C — .17 - .23 gpm (.64-.86 L/min.), .20 gpm (.75 L/min.) Standard Setting, D — .25 - .33 gpm (.94-1.27 L/min.), .29 gpm (1.10 L/min.) Standard Setting, F — .35 - .47 gpm (1.32-1.78 L/min.), .41 gpm (1.55 L/min.) Standard Setting, G — .45 - .61 gpm (1.70-2.30 L/min.), .53 gpm (2.0 L/min.) Standard Setting, H — .56 - .76 gpm (2.13-2.88 L/min.), .66 gpm (2.5 L/min.) Standard Setting, J — .7 - .94 gpm (2.64-3.57 L/min.), .82 gpm (3.10 L/min.) Standard Setting, K — .85 - 1.15 gpm (3.23-4.37 L/min.), 1.0 gpm (3.80 L/min.) Standard Setting, L — 1.09 - 1.47 gpm (4.12-5.58 L/min.), 1.28 gpm (4.85 L/min.) Standard Setting, M — 1.35 - 1.82 gpm (5.10-6.90 L/min.), 1.59 gpm (6.0 L/min.) Standard Setting, N — 1.68 - 2.28 gpm (6.38-8.63 L/min.), 1.98 gpm (7.50 L/min.) Standard Setting, P — 2.08 - 2.81 gpm (7.86-10.64 L/min.), 2.44 gpm (9.25 L/min.) Standard Setting, R — 2.58 - 3.49 gpm (9.78-13.23 L/min.), 3.04 gpm (11.5 L/min.) Standard Setting, S — 3.19 - 4.31 gpm (12.07-16.33 L/min.), 3.75 gpm (14.2 L/min.) Standard Setting, T — 3.93 - 5.32 gpm (14.88-20.13 L/min.), 4.62 gpm (17.5 L/min.) Standard Setting, V — 4.94 - 6.68 gpm (18.70-25.30 L/min.), 5.81 gpm (22.0 L/min.) Standard Setting
- Seal material: L — Extended Temp. Buna, N — Buna-N, V — Viton
- Material / coating: /AP — Stainless Steel, Passivated
Option rules: EPDM seals are not allowed on modifier /AP; If the modifier is /AP, the control must be C or L.
Selection notes
- You specify the flow; it is factory set.
- A tuneable option allows field trimming.
Where it is used
Fixed actuator speeds on production machinery and mobile functions.
Installation and seal kits
Valve hex 3/4 in. (19,1 mm), 7/8 in. (22,2 mm), 1 1/8 in. (28,6 mm), 1 1/4 in. (31,8 mm), 1 5/8 in. (41,3 mm); installation torque 20 - 25 lbf ft (27 - 33 Nm), 30 - 35 lbf ft (41 - 47 Nm), 45 - 50 lbf ft (61 - 68 Nm), 150 - 160 lbf ft (203 - 217 Nm), 350 - 375 lbf ft (474 - 508 Nm). Replacement seal kits — series 0: Buna: 990162007, Polyurethane: 990162002, Viton: 990162006; series 1: Buna: 990010007, Polyurethane: 990010002, Viton: 990010006; series 2: Buna: 990203007, Viton: 990203006; series 3: Buna: 990016007, Polyurethane: 990016002, Viton: 990016006; series 4: Buna: 990018007, Polyurethane: 990018002, Viton: 990018006.
Ordering
Indus Hydraulics is an authorised Sun Hydraulics distributor in the UAE and supplies the range direct from Sun Hydraulics. Quote the base model and its configuration letters — for example FCCCXAN — or send us the flow, pressure and duty and we select the valve. We confirm the full ordering code with the quotation.
Identification
| Parameter | Value |
|---|---|
| Valve function | Fixed-Orifice Pressure-Compensated Flow Control Valve |
| Series (frame sizes) | 0 to 4 |
| Cavity | T-162A, T-13A, T-5A, T-16A, T-18A |
Performance
| Parameter | Value |
|---|---|
| Capacity | 3 gpm to 50 gpm (11 L/min to 200 L/min) |
| Max operating pressure | 5000 psi (350 bar) |
| Setting range | A — .09 - .12 gpm (.34-.46 L/min.), .11 gpm (.4 L/min.) Standard Setting, B — .12 - .17 gpm (.47-.63 L/min.), .15 gpm (.55 L/min.) Standard Setting, C — .17 - .23 gpm (.64-.86 L/min.), .20 gpm (.75 L/min.) Standard Setting, D — .25 - .33 gpm (.94-1.27 L/min.), .29 gpm (1.10 L/min.) Standard Setting, F — .35 - .47 gpm (1.32-1.78 L/min.), .41 gpm (1.55 L/min.) Standard Setting, G — .45 - .61 gpm (1.70-2.30 L/min.), .53 gpm (2.0 L/min.) Standard Setting, H — .56 - .76 gpm (2.13- |
Configuration
| Parameter | Value |
|---|---|
| Control / adjustment | C — Tamper Resistant - Factory Set, K — Handknob, L — Standard Screw Adjustment, X — Not Adjustable |
| Seal material | L — Extended Temp. Buna, N — Buna-N, V — Viton |
| Material / coating | /AP — Stainless Steel, Passivated |
Installation
| Parameter | Value |
|---|---|
| Valve hex size | 3/4 in. (19,1 mm), 7/8 in. (22,2 mm), 1 1/8 in. (28,6 mm), 1 1/4 in. (31,8 mm), 1 5/8 in. (41,3 mm) |
| Installation torque | 20 - 25 lbf ft (27 - 33 Nm), 30 - 35 lbf ft (41 - 47 Nm), 45 - 50 lbf ft (61 - 68 Nm), 150 - 160 lbf ft (203 - 217 Nm), 350 - 375 lbf ft (474 - 508 Nm) |
| Seal kits | series 0: Buna: 990162007, Polyurethane: 990162002, Viton: 990162006; series 1: Buna: 990010007, Polyurethane: 990010002, Viton: 990010006; series 2: Buna: 990203007, Viton: 990203006; series 3: Buna: 990016007, Polyurethane: 990016002, Viton: 990016006; series 4: Buna: 990018007, Polyurethane: 990018002, Viton: 990018006 |
| Weight | .30 lb (0,15 kg) to 1.00 lb (0,45 kg) |
Shipping & lead time
Sizes & part numbers
8 sizes- Sun Hydraulics part no.FCBB
- Description
- 0-Series
- Series
- 0
- Cavity
- T-162A
- Capacity
- 3 gpm / 11 L/min
- Max pressure
- 5000 psi / 350 bar
- Sun Hydraulics part no.FCBC
- Description
- 0-Series
- Series
- 0
- Cavity
- T-162A
- Capacity
- 3 gpm / 11 L/min
- Max pressure
- 5000 psi / 350 bar
- Sun Hydraulics part no.FCCB
- Description
- Standard
- Series
- 1
- Cavity
- T-13A
- Capacity
- 6 gpm / 23 L/min
- Max pressure
- 5000 psi / 350 bar
- Sun Hydraulics part no.FCCC
- Description
- Standard
- Series
- 1
- Cavity
- T-13A
- Capacity
- 6 gpm / 23 L/min
- Max pressure
- 5000 psi / 350 bar
- Sun Hydraulics part no.FCDB
- Description
- Standard
- Series
- 2
- Cavity
- T-5A
- Capacity
- 12 gpm / 45 L/min
- Max pressure
- 5000 psi / 350 bar
- Sun Hydraulics part no.FCDC
- Description
- Standard
- Series
- 2
- Cavity
- T-5A
- Capacity
- 12 gpm / 45 L/min
- Max pressure
- 5000 psi / 350 bar
- Sun Hydraulics part no.FCEB
- Description
- Standard
- Series
- 3
- Cavity
- T-16A
- Capacity
- 25 gpm / 95 L/min
- Max pressure
- 5000 psi / 350 bar
- Sun Hydraulics part no.FCFB
- Description
- Standard
- Series
- 4
- Cavity
- T-18A
- Capacity
- 50 gpm / 200 L/min
- Max pressure
- 5000 psi / 350 bar
Description — What this part number is, as the manufacturer lists it. Series — Frame size the cartridge is built in, as the maker numbers it; one series shares one cavity size. Cavity — Cavity the cartridge screws into, as the maker designates it. Capacity — Rated flow capacity as published, in US and metric units. Max pressure — Maximum pressure as the maker publishes it, in psi and bar.
Part numbers are the maker’s base model codes. The full ordering code adds letters for the control, setting range, seal and material options, and we confirm it with the quotation. Capacity and pressure are the maker’s published ratings for the cartridge; check them against the cavity body and the rest of the circuit.
What is the Sun Hydraulics FCBB to FCFB fixed-orifice pressure-compensated flow control valve used for?▾
Which sizes and versions does the Sun Hydraulics FCBB to FCFB fixed-orifice pressure-compensated flow control valve come in?▾
How do I read the Sun Hydraulics model code FCCCXAN for the FCBB to FCFB fixed-orifice pressure-compensated flow control valve?▾
What is the maximum operating pressure of the Sun Hydraulics FCBB to FCFB fixed-orifice pressure-compensated flow control valve?▾
What flow capacity does the Sun Hydraulics FCBB to FCFB fixed-orifice pressure-compensated flow control valve have by series?▾
Which seal materials and body finishes does the Sun Hydraulics FCBB to FCFB fixed-orifice pressure-compensated flow control valve come with?▾
Which cavity does the Sun Hydraulics FCBB to FCFB fixed-orifice pressure-compensated flow control valve fit?▾
Which seal kit fits the Sun Hydraulics FCBB to FCFB fixed-orifice pressure-compensated flow control valve?▾
How is the Sun Hydraulics FCBB to FCFB fixed-orifice pressure-compensated flow control valve installed?▾
Where is the Sun Hydraulics FCBB to FCFB fixed-orifice pressure-compensated flow control valve used?▾
Sun Hydraulics FCBB to FCFB or FXAA to FXFA: what is the difference?▾
Do you stock the Sun Hydraulics FCBB to FCFB in Dubai?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations








