Skip to content
SUN HYDRAULICSIH-SUN-NFAB

Sun Hydraulics Fully Adjustable Needle Valve, Pilot Capacity — NFAB

Flow Control CartridgesEx-stock · delivery in 3 days
Sun Hydraulics NFAB pilot-capacity needle valve, series P, T-8A cavity — dimension drawing
VIEW 01·Sun Hydraulics NFAB pilot-capacity needle valve, series P, T-8A cavity — dimension drawing
1 / 2

Sun Hydraulics pilot-capacity needle valve: NFAB, series P, .2 gpm (.035 inch) (0,8 L/min. (0,9 mm)), T-8A cavity. Authorised Sun Hydraulics distributor, UAE — supplied direct from Sun.

Key features

  • Valve function: Pilot-Capacity Needle Valve
  • Capacity: .2 gpm (.035 inch) (0,8 L/min. (0,9 mm))
  • Max operating pressure: 5000 psi (350 bar)
  • Cavity: T-8A
Valve function
Pilot-Capacity Needle Valve
Series (frame sizes)
P
Cavity
T-8A
Ships in 24h
Order before 14:00 GST · Jebel Ali
24-month warranty
Manufacturer-backed · genuine parts
Engineering support
A real applications engineer

Product description

A small, fully adjustable needle valve for the T-8A cavity, used to meter pilot flow in a main-stage valve or very low flows. Fitted into a main stage's own T-8A cavity, it removes the need for separate pilot lines.

Sizes and cavities

Sun Hydraulics builds this valve in 1 size. The series sets the cavity it screws into and its flow capacity:

  • NFAB — series P, T-8A cavity, .2 gpm (.035 inch) (0,8 L/min. (0,9 mm))

Sun builds its cartridges in frame sizes called series, from the small series 0 to series 4. The series fixes the cavity the valve screws into, so every function in one series shares that cavity, and a larger series carries more flow. Choose the smallest series that passes your flow at an acceptable pressure drop, using the performance curves, then the configuration options for control, setting and seals. If you are replacing a valve, the model code stamped on it gives the series and function directly, and the seal kits listed further down fit that series.

Ratings

  • Maximum operating pressure: 5000 psi (350 bar)

Configuration options

The letters after the base model code choose these options (shown for NFAB; a size may add or drop a choice):

  • Control: K — Handknob
  • Seal material: L — Extended Temp. Buna, N — Buna-N, V — Viton, E — EPDM

Option rules: If the seal is E, the control must be K.

Selection notes

  • Pilot-flow capacity only.
  • Shares the T-8A cavity with Sun's other 2-port pilot cartridges.

Where it is used

Tuning the response of pilot-operated and vent-to-operate main stages.

Installation and seal kits

Valve hex 7/8 in. (22,2 mm); installation torque 20 - 25 lbf ft (27 - 33 Nm). Replacement seal kits — series P: Buna: 990008007, EPDM: 990008014, Polyurethane: 990008002, Viton: 990008006.

Ordering

Indus Hydraulics is an authorised Sun Hydraulics distributor in the UAE and supplies the range direct from Sun Hydraulics. Quote the base model and its configuration letters — for example NFABKXN — or send us the flow, pressure and duty and we select the valve. We confirm the full ordering code with the quotation.

Identification

ParameterValue
Valve functionPilot-Capacity Needle Valve
Series (frame sizes)P
CavityT-8A

Performance

ParameterValue
Capacity.2 gpm (.035 inch) (0,8 L/min. (0,9 mm))
Max operating pressure5000 psi (350 bar)

Configuration

ParameterValue
Control / adjustmentK — Handknob
Seal materialL — Extended Temp. Buna, N — Buna-N, V — Viton, E — EPDM

Installation

ParameterValue
Valve hex size7/8 in. (22,2 mm)
Installation torque20 - 25 lbf ft (27 - 33 Nm)
Seal kitsseries P: Buna: 990008007, EPDM: 990008014, Polyurethane: 990008002, Viton: 990008006

Shipping & lead time

Lead TimeEx-stock from Dubai — delivered within 3 working days in the UAE. Export orders ship on the lane stated for the destination.

Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations

RELATED · OFTEN PAIRED WITH

Engineers viewing this also looked at