Sun Hydraulics Normally Closed, Modulating Element with Pilot Source from Port 1 — LRBA, LRDA, LRFA, LRHA, LRJA, Series 0 to 4

Sun Hydraulics normally closed modulating element with pilot source: LRBA, LRDA, LRFA, LRHA, LRJA, series 0 to 4, 7.5 gpm to 120 gpm (30 L/min to 480 L/min), T-163A, T-11A, T-2A, T-17A, T-19A cavities. Authorised Sun Hydraulics distributor, UAE — supplied direct from Sun.
Key features
- Valve function: Normally Closed Modulating Element with Pilot Source
- Capacity: 7.5 gpm to 120 gpm (30 L/min to 480 L/min)
- Max operating pressure: 5000 psi (350 bar)
- Cavity: T-163A, T-11A, T-2A, T-17A, T-19A
- Valve function
- Normally Closed Modulating Element with Pilot Source
- Series (frame sizes)
- 0 to 4
- Cavity
- T-163A, T-11A, T-2A, T-17A, T-19A
Product description
A normally closed modulating element with an internal orifice from port 1 to port 3, so it can work as the main stage of a relief valve controlled remotely by a pilot relief or pilot solenoid valve. The T-8A version carries its own pilot cavity.
Sizes and cavities
Sun Hydraulics builds this valve in 5 sizes. The series sets the cavity it screws into and its flow capacity:
- LRBA — series 0, T-163A cavity, 7.5 gpm (30 L/min), 0-series
- LRDA — series 1, T-11A cavity, 15 gpm (60 L/min)
- LRFA — series 2, T-2A cavity, 30 gpm (120 L/min)
- LRHA — series 3, T-17A cavity, 60 gpm (240 L/min)
- LRJA — series 4, T-19A cavity, 120 gpm (480 L/min)
Sun builds its cartridges in frame sizes called series, from the small series 0 to series 4. The series fixes the cavity the valve screws into, so every function in one series shares that cavity, and a larger series carries more flow. Choose the smallest series that passes your flow at an acceptable pressure drop, using the performance curves, then the configuration options for control, setting and seals. If you are replacing a valve, the model code stamped on it gives the series and function directly, and the seal kits listed further down fit that series.
Ratings
- Maximum operating pressure: 5000 psi (350 bar)
- Maximum leakage: 1 in³/min.@1000 psi (15 cc/min.@70 bar)
Configuration options
The letters after the base model code choose these options (shown for LRDA; a size may add or drop a choice):
- Control: X — Not Adjustable
- Seal material: N — Buna-N, V — Viton
- Material / coating: /AP — Stainless Steel, Passivated
Option rules: If the modifier is /AP, the control must be X.
Selection notes
- All ports accept 5,000 psi (350 bar).
Where it is used
High-flow remotely or electronically controlled relief functions.
Installation and seal kits
Valve hex 3/4 in. (19,1 mm), 7/8 in. (22,2 mm), 1 1/8 in. (28,6 mm), 1 1/4 in. (31,8 mm), 1 5/8 in. (41,3 mm); installation torque 20 - 25 lbf ft (27 - 33 Nm), 30 - 35 lbf ft (41 - 47 Nm), 45 - 50 lbf ft (61 - 68 Nm), 150 - 160 lbf ft (203 - 217 Nm), 350 - 375 lbf ft (474 - 508 Nm). Replacement seal kits — series 0: Buna: 990163007, Polyurethane: 990163002, Viton: 990163006; series 1: Buna: 990011007, Polyurethane: 990011002, Viton: 990011006; series 2: Buna: 990202007, Polyurethane: 990002002, Viton: 990202006; series 3: Buna: 990017007, Polyurethane: 990017002, Viton: 990017006; series 4: Buna: 990019007, Polyurethane: 990019002, Viton: 990019006.
Ordering
Indus Hydraulics is an authorised Sun Hydraulics distributor in the UAE and supplies the range direct from Sun Hydraulics. Quote the base model and its configuration letters — for example LRDAXHN — or send us the flow, pressure and duty and we select the valve. We confirm the full ordering code with the quotation.
Identification
| Parameter | Value |
|---|---|
| Valve function | Normally Closed Modulating Element with Pilot Source |
| Series (frame sizes) | 0 to 4 |
| Cavity | T-163A, T-11A, T-2A, T-17A, T-19A |
Performance
| Parameter | Value |
|---|---|
| Capacity | 7.5 gpm to 120 gpm (30 L/min to 480 L/min) |
| Max operating pressure | 5000 psi (350 bar) |
| Max leakage | 1 in³/min.@1000 psi (15 cc/min.@70 bar) |
Configuration
| Parameter | Value |
|---|---|
| Control / adjustment | X — Not Adjustable |
| Seal material | N — Buna-N, V — Viton |
| Material / coating | /AP — Stainless Steel, Passivated |
Installation
| Parameter | Value |
|---|---|
| Valve hex size | 3/4 in. (19,1 mm), 7/8 in. (22,2 mm), 1 1/8 in. (28,6 mm), 1 1/4 in. (31,8 mm), 1 5/8 in. (41,3 mm) |
| Installation torque | 20 - 25 lbf ft (27 - 33 Nm), 30 - 35 lbf ft (41 - 47 Nm), 45 - 50 lbf ft (61 - 68 Nm), 150 - 160 lbf ft (203 - 217 Nm), 350 - 375 lbf ft (474 - 508 Nm) |
| Seal kits | series 0: Buna: 990163007, Polyurethane: 990163002, Viton: 990163006; series 1: Buna: 990011007, Polyurethane: 990011002, Viton: 990011006; series 2: Buna: 990202007, Polyurethane: 990002002, Viton: 990202006; series 3: Buna: 990017007, Polyurethane: 990017002, Viton: 990017006; series 4: Buna: 990019007, Polyurethane: 990019002, Viton: 990019006 |
| Weight | 2.60 lb (1,20 kg) |
Shipping & lead time
Sizes & part numbers
5 sizes- Sun Hydraulics part no.LRBA
- Description
- 0-Series
- Series
- 0
- Cavity
- T-163A
- Capacity
- 7.5 gpm / 30 L/min
- Max pressure
- 5000 psi / 350 bar
- Sun Hydraulics part no.LRDA
- Description
- Standard
- Series
- 1
- Cavity
- T-11A
- Capacity
- 15 gpm / 60 L/min
- Max pressure
- 5000 psi / 350 bar
- Sun Hydraulics part no.LRFA
- Description
- Standard
- Series
- 2
- Cavity
- T-2A
- Capacity
- 30 gpm / 120 L/min
- Max pressure
- 5000 psi / 350 bar
- Sun Hydraulics part no.LRHA
- Description
- Standard
- Series
- 3
- Cavity
- T-17A
- Capacity
- 60 gpm / 240 L/min
- Max pressure
- 5000 psi / 350 bar
- Sun Hydraulics part no.LRJA
- Description
- Standard
- Series
- 4
- Cavity
- T-19A
- Capacity
- 120 gpm / 480 L/min
- Max pressure
- 5000 psi / 350 bar
Description — What this part number is, as the manufacturer lists it. Series — Frame size the cartridge is built in, as the maker numbers it; one series shares one cavity size. Cavity — Cavity the cartridge screws into, as the maker designates it. Capacity — Rated flow capacity as published, in US and metric units. Max pressure — Maximum pressure as the maker publishes it, in psi and bar.
Part numbers are the maker’s base model codes. The full ordering code adds letters for the control, setting range, seal and material options, and we confirm it with the quotation. Capacity and pressure are the maker’s published ratings for the cartridge; check them against the cavity body and the rest of the circuit.
What is the Sun Hydraulics LRBA, LRDA, LRFA, LRHA, LRJA normally closed modulating element with pilot source used for?▾
Which sizes and versions does the Sun Hydraulics LRBA, LRDA, LRFA, LRHA, LRJA normally closed modulating element with pilot source come in?▾
How do I read the Sun model code LRDAXHN?▾
What is the maximum operating pressure of the Sun Hydraulics LRBA, LRDA, LRFA, LRHA, LRJA normally closed modulating element with pilot source?▾
What flow capacity does the Sun Hydraulics LRBA, LRDA, LRFA, LRHA, LRJA normally closed modulating element with pilot source have by series?▾
Which seal materials and body finishes does the Sun Hydraulics LRBA, LRDA, LRFA, LRHA, LRJA normally closed modulating element with pilot source come with?▾
Which cavity does the Sun Hydraulics LRBA, LRDA, LRFA, LRHA, LRJA normally closed modulating element with pilot source fit?▾
Which seal kit fits the Sun Hydraulics LRBA, LRDA, LRFA, LRHA, LRJA normally closed modulating element with pilot source?▾
How is the Sun Hydraulics LRBA, LRDA, LRFA, LRHA, LRJA normally closed modulating element with pilot source installed?▾
Where is the Sun Hydraulics LRBA, LRDA, LRFA, LRHA, LRJA normally closed modulating element with pilot source used?▾
Sun Hydraulics LRBA, LRDA, LRFA, LRHA, LRJA or LRHA8: what is the difference?▾
Do you stock the Sun Hydraulics LRBA, LRDA, LRFA, LRHA, LRJA in Dubai?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations








