Sun Hydraulics 2-Way, Direct-Acting Electro-Proportional, Pressure Compensated Flow Control Valve with Reverse Flow Check — FDEP

Sun Hydraulics electro-proportional pressure-compensated flow control valve: FDEP, series 3, 30 gpm (120 L/min), T-16A cavity. Authorised Sun Hydraulics distributor, UAE — supplied direct from Sun.
Key features
- Valve function: Electro-Proportional Pressure-Compensated Flow Control Valve
- Capacity: 30 gpm (120 L/min)
- Max operating pressure: 5000 psi (350 bar)
- Cavity: T-16A
- Valve function
- Electro-Proportional Pressure-Compensated Flow Control Valve
- Series (frame sizes)
- 3
- Cavity
- T-16A
Product description
A normally closed flow control whose flow is set by a proportional solenoid and held steady by an integral compensator, from nearly closed to full flow. A high-capacity check passes return flow freely from port 2 to port 1.
Sizes and cavities
Sun Hydraulics builds this valve in 1 size. The series sets the cavity it screws into and its flow capacity:
- FDEP — series 3, T-16A cavity, 30 gpm (120 L/min)
Sun builds its cartridges in frame sizes called series, from the small series 0 to series 4. The series fixes the cavity the valve screws into, so every function in one series shares that cavity, and a larger series carries more flow. Choose the smallest series that passes your flow at an acceptable pressure drop, using the performance curves, then the configuration options for control, setting and seals. If you are replacing a valve, the model code stamped on it gives the series and function directly, and the seal kits listed further down fit that series.
Ratings
- Maximum operating pressure: 5000 psi (350 bar)
- Typical response time: 50 ms
Configuration options
The letters after the base model code choose these options (shown for FDEP; a size may add or drop a choice):
- Control: X — No Manual Override
- Seal material: N — Buna-N, V — Viton, E — EPDM
Option rules: If the coil is in this group (211, 212, 212D, 212X01, 212X02, 214, 214D, 214L, 214X01, 214X02, 223, 224, 224D, 224X01, 224X02, 228, 228D, 228X01, 228X02, 612, 612D, 614, 614D, 624, 624D, 628, 628D, 712, 712D, 714, 714D, 724, 724D, 728, 728D, 812, 812D, 814, 814D, 824, 824D, 828, 828D, 912, 912D, 912X01, 912X02, 914, 914D, 914X01, 914X02, 924, 924D, 924X01, 924X02, 928, 928D, 928X01, 928X02, JM11BD, JM11CD, JM12BD, JM12CD, JM23BD, JM23CD, JM24BD, JM24CD, JN11BD, JN11CD, JN12BD, JN12CD, JN23BD, JN23CD, JN24BD, JN24CD), the range must be C, A or B.
Selection notes
- Zinc-nickel plating as standard.
- Coil connector options up to IP69K.
Where it is used
Electronically controlled speeds under changing load — lifts, winches, conveyors and fans.
Installation and seal kits
Valve hex 1 1/4 in. (31,8 mm); installation torque 150 - 160 lbf ft (203 - 217 Nm). Replacement seal kits — series 3: Buna: 990016007, Viton: 990016006.
Ordering
Indus Hydraulics is an authorised Sun Hydraulics distributor in the UAE and supplies the range direct from Sun Hydraulics. Quote the base model and its configuration letters — for example FDEPXBN — or send us the flow, pressure and duty and we select the valve. We confirm the full ordering code with the quotation.
Identification
| Parameter | Value |
|---|---|
| Valve function | Electro-Proportional Pressure-Compensated Flow Control Valve |
| Series (frame sizes) | 3 |
| Cavity | T-16A |
Performance
| Parameter | Value |
|---|---|
| Capacity | 30 gpm (120 L/min) |
| Max operating pressure | 5000 psi (350 bar) |
Configuration
| Parameter | Value |
|---|---|
| Control / adjustment | X — No Manual Override |
| Seal material | N — Buna-N, V — Viton, E — EPDM |
Installation
| Parameter | Value |
|---|---|
| Valve hex size | 1 1/4 in. (31,8 mm) |
| Installation torque | 150 - 160 lbf ft (203 - 217 Nm) |
| Seal kits | series 3: Buna: 990016007, Viton: 990016006 |
| Weight | 1.20 lb (0,55 kg) |
Shipping & lead time
Sizes & part numbers
1 size- Sun Hydraulics part no.FDEP
- Series
- 3
- Cavity
- T-16A
- Capacity
- 30 gpm / 120 L/min
- Max pressure
- 5000 psi / 350 bar
Series — Frame size the cartridge is built in, as the maker numbers it; one series shares one cavity size. Cavity — Cavity the cartridge screws into, as the maker designates it. Capacity — Rated flow capacity as published, in US and metric units. Max pressure — Maximum pressure as the maker publishes it, in psi and bar.
Part numbers are the maker’s base model codes. The full ordering code adds letters for the control, setting range, seal and material options, and we confirm it with the quotation. Capacity and pressure are the maker’s published ratings for the cartridge; check them against the cavity body and the rest of the circuit.
What is the Sun Hydraulics FDEP electro-proportional pressure-compensated flow control valve used for?▾
Which sizes and versions does the Sun Hydraulics FDEP electro-proportional pressure-compensated flow control valve come in?▾
How do I read the Sun Hydraulics model code FDEPXBN for the FDEP electro-proportional pressure-compensated flow control valve?▾
What is the maximum operating pressure of the Sun Hydraulics FDEP electro-proportional pressure-compensated flow control valve?▾
What flow capacity does the FDEP electro-proportional pressure-compensated flow control valve have?▾
Which seal materials and body finishes does the Sun Hydraulics FDEP electro-proportional pressure-compensated flow control valve come with?▾
Which cavity does the Sun Hydraulics FDEP electro-proportional pressure-compensated flow control valve fit?▾
Which seal kit fits the Sun Hydraulics FDEP electro-proportional pressure-compensated flow control valve?▾
How is the Sun Hydraulics FDEP electro-proportional pressure-compensated flow control valve installed?▾
Where is the Sun Hydraulics FDEP electro-proportional pressure-compensated flow control valve used?▾
Sun Hydraulics FDEP or FCBB to FCFB: what is the difference?▾
Do you stock the Sun Hydraulics FDEP in Dubai?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations








