Sun Hydraulics Normally Closed Modulating Element with Shuttle — LRDS

Sun Hydraulics normally closed modulating element: LRDS, series 1, 15 gpm (60 L/min), T-21A cavity. Authorised Sun Hydraulics distributor, UAE — supplied direct from Sun.
Key features
- Valve function: Normally Closed Modulating Element
- Capacity: 15 gpm (60 L/min)
- Max operating pressure: 5000 psi (350 bar)
- Cavity: T-21A
- Valve function
- Normally Closed Modulating Element
- Series (frame sizes)
- 1
- Cavity
- T-21A
Product description
A normally closed, spool-type modulating element that acts as a bypass compensator: with an external orifice it keeps a constant pressure drop across it, giving a pressure-compensated flow control unaffected by upstream or downstream pressure. The shuttle version picks the higher of two load signals.
Sizes and cavities
Sun Hydraulics builds this valve in 1 size. The series sets the cavity it screws into and its flow capacity:
- LRDS — series 1, T-21A cavity, 15 gpm (60 L/min)
Sun builds its cartridges in frame sizes called series, from the small series 0 to series 4. The series fixes the cavity the valve screws into, so every function in one series shares that cavity, and a larger series carries more flow. Choose the smallest series that passes your flow at an acceptable pressure drop, using the performance curves, then the configuration options for control, setting and seals. If you are replacing a valve, the model code stamped on it gives the series and function directly, and the seal kits listed further down fit that series.
Ratings
- Maximum operating pressure: 5000 psi (350 bar)
Configuration options
The letters after the base model code choose these options (shown for LRDS; a size may add or drop a choice):
- Control: X — Not Adjustable
- Seal material: N — Buna-N, V — Viton
Selection notes
- A tuning control trims the pressure drop, and so the flow, by about ±25%.
- Floating construction avoids binding from over-torque or cavity variation.
Where it is used
Building bypass-compensated flow controls and load-sensing circuits in a manifold.
Installation and seal kits
Valve hex 7/8 in. (22,2 mm); installation torque 30 - 35 lbf ft (41 - 47 Nm). Replacement seal kits — series 1: Buna: 990021007, Polyurethane: 990021002, Viton: 990021006.
Ordering
Indus Hydraulics is an authorised Sun Hydraulics distributor in the UAE and supplies the range direct from Sun Hydraulics. Quote the base model and its configuration letters — for example LRDSXHN — or send us the flow, pressure and duty and we select the valve. We confirm the full ordering code with the quotation.
Identification
| Parameter | Value |
|---|---|
| Valve function | Normally Closed Modulating Element |
| Series (frame sizes) | 1 |
| Cavity | T-21A |
Performance
| Parameter | Value |
|---|---|
| Capacity | 15 gpm (60 L/min) |
| Max operating pressure | 5000 psi (350 bar) |
Configuration
| Parameter | Value |
|---|---|
| Control / adjustment | X — Not Adjustable |
| Seal material | N — Buna-N, V — Viton |
Installation
| Parameter | Value |
|---|---|
| Valve hex size | 7/8 in. (22,2 mm) |
| Installation torque | 30 - 35 lbf ft (41 - 47 Nm) |
| Seal kits | series 1: Buna: 990021007, Polyurethane: 990021002, Viton: 990021006 |
Shipping & lead time
Sizes & part numbers
1 size- Sun Hydraulics part no.LRDS
- Series
- 1
- Cavity
- T-21A
- Capacity
- 15 gpm / 60 L/min
- Max pressure
- 5000 psi / 350 bar
Series — Frame size the cartridge is built in, as the maker numbers it; one series shares one cavity size. Cavity — Cavity the cartridge screws into, as the maker designates it. Capacity — Rated flow capacity as published, in US and metric units. Max pressure — Maximum pressure as the maker publishes it, in psi and bar.
Part numbers are the maker’s base model codes. The full ordering code adds letters for the control, setting range, seal and material options, and we confirm it with the quotation. Capacity and pressure are the maker’s published ratings for the cartridge; check them against the cavity body and the rest of the circuit.
What is the Sun Hydraulics LRDS normally closed modulating element used for?▾
Which sizes and versions does the Sun Hydraulics LRDS normally closed modulating element come in?▾
How do I read the Sun Hydraulics model code LRDSXHN for the LRDS normally closed modulating element?▾
What is the maximum operating pressure of the Sun Hydraulics LRDS normally closed modulating element?▾
What flow capacity does the LRDS normally closed modulating element have?▾
Which seal materials and body finishes does the Sun Hydraulics LRDS normally closed modulating element come with?▾
Which cavity does the Sun Hydraulics LRDS normally closed modulating element fit?▾
Which seal kit fits the Sun Hydraulics LRDS normally closed modulating element?▾
How is the Sun Hydraulics LRDS normally closed modulating element installed?▾
Where is the Sun Hydraulics LRDS normally closed modulating element used?▾
Sun Hydraulics LRDS or LRBC, LRDC, LRFC, LRHC, LRJC: what is the difference?▾
Do you stock the Sun Hydraulics LRDS in Dubai?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations








