Sun Hydraulics Normally Closed, Modulating Element — LRBC, LRDC, LRFC, LRHC, LRJC, Series 0 to 4

Sun Hydraulics normally closed modulating element: LRBC, LRDC, LRFC, LRHC, LRJC, series 0 to 4, 7.5 gpm to 120 gpm (30 L/min to 480 L/min), T-163A, T-11A, T-2A, T-17A, T-19A cavities. Authorised Sun Hydraulics distributor, UAE — supplied direct from Sun.
Key features
- Valve function: Normally Closed Modulating Element
- Capacity: 7.5 gpm to 120 gpm (30 L/min to 480 L/min)
- Max operating pressure: 5000 psi (350 bar)
- Cavity: T-163A, T-11A, T-2A, T-17A, T-19A
- Valve function
- Normally Closed Modulating Element
- Series (frame sizes)
- 0 to 4
- Cavity
- T-163A, T-11A, T-2A, T-17A, T-19A
Product description
A normally closed, spool-type modulating element that acts as a bypass compensator: with an external orifice it keeps a constant pressure drop across it, giving a pressure-compensated flow control unaffected by upstream or downstream pressure. The shuttle version picks the higher of two load signals.
Sizes and cavities
Sun Hydraulics builds this valve in 5 sizes. The series sets the cavity it screws into and its flow capacity:
- LRBC — series 0, T-163A cavity, 7.5 gpm (30 L/min), 0-series
- LRDC — series 1, T-11A cavity, 15 gpm (60 L/min)
- LRFC — series 2, T-2A cavity, 30 gpm (120 L/min)
- LRHC — series 3, T-17A cavity, 60 gpm (240 L/min)
- LRJC — series 4, T-19A cavity, 120 gpm (480 L/min)
Sun builds its cartridges in frame sizes called series, from the small series 0 to series 4. The series fixes the cavity the valve screws into, so every function in one series shares that cavity, and a larger series carries more flow. Choose the smallest series that passes your flow at an acceptable pressure drop, using the performance curves, then the configuration options for control, setting and seals. If you are replacing a valve, the model code stamped on it gives the series and function directly, and the seal kits listed further down fit that series.
Ratings
- Maximum operating pressure: 5000 psi (350 bar)
Configuration options
The letters after the base model code choose these options (shown for LRDC; a size may add or drop a choice):
- Control: X — Not Adjustable
- Seal material: N — Buna-N, V — Viton, E — EPDM
- Material / coating: /AP — Stainless Steel, Passivated, /LH — Mild Steel, Zinc-Nickel
Option rules: If the modifier is /AP, the control must be X; If the modifier is /LH, the control must be X; If the seal is E, the control must be X.
Selection notes
- A tuning control trims the pressure drop, and so the flow, by about ±25%.
- Floating construction avoids binding from over-torque or cavity variation.
Where it is used
Building bypass-compensated flow controls and load-sensing circuits in a manifold.
Installation and seal kits
Valve hex 3/4 in. (19,1 mm), 7/8 in. (22,2 mm), 1 1/8 in. (28,6 mm), 1 1/4 in. (31,8 mm), 1 5/8 in. (41,3 mm); installation torque 20 - 25 lbf ft (27 - 33 Nm), 30 - 35 lbf ft (41 - 47 Nm), 45 - 50 lbf ft (61 - 68 Nm), 150 - 160 lbf ft (203 - 217 Nm), 350 - 375 lbf ft (474 - 508 Nm). Replacement seal kits — series 0: Buna: 990163007, Polyurethane: 990163002, Viton: 990163006; series 1: Buna: 990011007, EPDM: 990011014, Polyurethane: 990011002, Viton: 990011006; series 2: Buna: 990202007, Polyurethane: 990002002, Viton: 990202006; series 3: Buna: 990017007, Polyurethane: 990017002, Viton: 990017006; series 4: Buna: 990019007, EPDM: 990019014, Polyurethane: 990019002, Viton: 990019006.
Ordering
Indus Hydraulics is an authorised Sun Hydraulics distributor in the UAE and supplies the range direct from Sun Hydraulics. Quote the base model and its configuration letters — for example LRDCXHN — or send us the flow, pressure and duty and we select the valve. We confirm the full ordering code with the quotation.
Installation
| Parameter | Value |
|---|---|
| Valve hex size | 3/4 in. (19,1 mm), 7/8 in. (22,2 mm), 1 1/8 in. (28,6 mm), 1 1/4 in. (31,8 mm), 1 5/8 in. (41,3 mm) |
| Installation torque | 20 - 25 lbf ft (27 - 33 Nm), 30 - 35 lbf ft (41 - 47 Nm), 45 - 50 lbf ft (61 - 68 Nm), 150 - 160 lbf ft (203 - 217 Nm), 350 - 375 lbf ft (474 - 508 Nm) |
| Seal kits | series 0: Buna: 990163007, Polyurethane: 990163002, Viton: 990163006; series 1: Buna: 990011007, EPDM: 990011014, Polyurethane: 990011002, Viton: 990011006; series 2: Buna: 990202007, Polyurethane: 990002002, Viton: 990202006; series 3: Buna: 990017007, Polyurethane: 990017002, Viton: 990017006; series 4: Buna: 990019007, EPDM: 990019014, Polyurethane: 990019002, Viton: 990019006 |
| Weight | .40 lb (0,20 kg) |
Configuration
| Parameter | Value |
|---|---|
| Control / adjustment | X — Not Adjustable |
| Seal material | N — Buna-N, V — Viton, E — EPDM |
| Material / coating | /AP — Stainless Steel, Passivated, /LH — Mild Steel, Zinc-Nickel |
Identification
| Parameter | Value |
|---|---|
| Valve function | Normally Closed Modulating Element |
| Series (frame sizes) | 0 to 4 |
| Cavity | T-163A, T-11A, T-2A, T-17A, T-19A |
Performance
| Parameter | Value |
|---|---|
| Capacity | 7.5 gpm to 120 gpm (30 L/min to 480 L/min) |
| Max operating pressure | 5000 psi (350 bar) |
Shipping & lead time
Sizes & part numbers
5 sizes- Sun Hydraulics part no.LRBC
- Description
- 0-Series
- Series
- 0
- Cavity
- T-163A
- Capacity
- 7.5 gpm / 30 L/min
- Max pressure
- 5000 psi / 350 bar
- Sun Hydraulics part no.LRDC
- Description
- Standard
- Series
- 1
- Cavity
- T-11A
- Capacity
- 15 gpm / 60 L/min
- Max pressure
- 5000 psi / 350 bar
- Sun Hydraulics part no.LRFC
- Description
- Standard
- Series
- 2
- Cavity
- T-2A
- Capacity
- 30 gpm / 120 L/min
- Max pressure
- 5000 psi / 350 bar
- Sun Hydraulics part no.LRHC
- Description
- Standard
- Series
- 3
- Cavity
- T-17A
- Capacity
- 60 gpm / 240 L/min
- Max pressure
- 5000 psi / 350 bar
- Sun Hydraulics part no.LRJC
- Description
- Standard
- Series
- 4
- Cavity
- T-19A
- Capacity
- 120 gpm / 480 L/min
- Max pressure
- 5000 psi / 350 bar
Description — What this part number is, as the manufacturer lists it. Series — Frame size the cartridge is built in, as the maker numbers it; one series shares one cavity size. Cavity — Cavity the cartridge screws into, as the maker designates it. Capacity — Rated flow capacity as published, in US and metric units. Max pressure — Maximum pressure as the maker publishes it, in psi and bar.
Part numbers are the maker’s base model codes. The full ordering code adds letters for the control, setting range, seal and material options, and we confirm it with the quotation. Capacity and pressure are the maker’s published ratings for the cartridge; check them against the cavity body and the rest of the circuit.
What is the Sun Hydraulics LRBC, LRDC, LRFC, LRHC, LRJC normally closed modulating element used for?▾
Which sizes and versions does the Sun Hydraulics LRBC, LRDC, LRFC, LRHC, LRJC normally closed modulating element come in?▾
How do I read the Sun Hydraulics model code LRDCXHN for the LRBC, LRDC, LRFC, LRHC, LRJC normally closed modulating element?▾
What is the maximum operating pressure of the Sun Hydraulics LRBC, LRDC, LRFC, LRHC, LRJC normally closed modulating element?▾
What flow capacity does the Sun Hydraulics LRBC, LRDC, LRFC, LRHC, LRJC normally closed modulating element have by series?▾
Which seal materials and body finishes does the Sun Hydraulics LRBC, LRDC, LRFC, LRHC, LRJC normally closed modulating element come with?▾
Which cavity does the Sun Hydraulics LRBC, LRDC, LRFC, LRHC, LRJC normally closed modulating element fit?▾
Which seal kit fits the Sun Hydraulics LRBC, LRDC, LRFC, LRHC, LRJC normally closed modulating element?▾
How is the Sun Hydraulics LRBC, LRDC, LRFC, LRHC, LRJC normally closed modulating element installed?▾
Where is the Sun Hydraulics LRBC, LRDC, LRFC, LRHC, LRJC normally closed modulating element used?▾
Sun Hydraulics LRBC, LRDC, LRFC, LRHC, LRJC or LRFCL: what is the difference?▾
Do you stock the Sun Hydraulics LRBC, LRDC, LRFC, LRHC, LRJC in Dubai?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations








