Sun Hydraulics Direct-Acting Relief Valve, After Check — HRDB

Sun Hydraulics relief valve with integral check: HRDB, series 1, 10 gpm (40 L/min), T-11A cavity. Authorised Sun Hydraulics distributor, UAE — supplied direct from Sun.
Key features
- Valve function: Relief Valve with Integral Check
- Capacity: 10 gpm (40 L/min)
- Max operating pressure: 5000 psi (350 bar)
- Cavity: T-11A
- Valve function
- Relief Valve with Integral Check
- Series (frame sizes)
- 1
- Cavity
- T-11A
Product description
A CavitySaver™ multi-function cartridge combining a relief valve with a check valve in one cavity. Flow passes from the inlet (port 2) through the check to the system port (port 1), while the relief protects the line by opening to tank (port 3).
Sizes and cavities
Sun Hydraulics builds this valve in 1 size. The series sets the cavity it screws into and its flow capacity:
- HRDB — series 1, T-11A cavity, 10 gpm (40 L/min)
Sun builds its cartridges in frame sizes called series, from the small series 0 to series 4. The series fixes the cavity the valve screws into, so every function in one series shares that cavity, and a larger series carries more flow. Choose the smallest series that passes your flow at an acceptable pressure drop, using the performance curves, then the configuration options for control, setting and seals. If you are replacing a valve, the model code stamped on it gives the series and function directly, and the seal kits listed further down fit that series.
Ratings
- Maximum operating pressure: 5000 psi (350 bar)
- Maximum leakage: 5 drops/min. (0,3 cc/min)
- Typical response time: 10 ms
- Check cracking pressure: 25 psi (1,7 bar)
Configuration options
The letters after the base model code choose these options (shown for HRDB; a size may add or drop a choice):
- Control: C — Tamper Resistant - Factory Set, K — Handknob, L — Standard Screw Adjustment
- Setting range: A — 500 - 3000 psi (35 - 210 bar), 1000 psi (70 bar) Standard Setting, W — 800 - 4500 psi (55 - 315 bar), 1000 psi (70 bar) Standard Setting
- Seal material: N — Buna-N, V — Viton
- Material / coating: /AP — Stainless Steel, Passivated, /LH — Mild Steel, Zinc-Nickel
Option rules: If the modifier is /AP, the control must be C or L; If the modifier is /LH, the control must be C or L.
Selection notes
- Its flow path differs from Sun's standard relief cartridges, so it does not fit a standard relief manifold cavity.
- Before-check and after-check versions put the relief upstream or downstream of the check.
Where it is used
Pump outlet protection with a built-in check, saving a cavity and a valve in compact manifolds.
Installation and seal kits
Valve hex 7/8 in. (22,2 mm); installation torque 30 - 35 lbf ft (41 - 47 Nm). Replacement seal kits — series 1: Buna: 990011007, Polyurethane: 990011002, Viton: 990011006.
Ordering
Indus Hydraulics is an authorised Sun Hydraulics distributor in the UAE and supplies the range direct from Sun Hydraulics. Quote the base model and its configuration letters — for example HRDBLAN — or send us the flow, pressure and duty and we select the valve. We confirm the full ordering code with the quotation.
Installation
| Parameter | Value |
|---|---|
| Valve hex size | 7/8 in. (22,2 mm) |
| Installation torque | 30 - 35 lbf ft (41 - 47 Nm) |
| Seal kits | series 1: Buna: 990011007, Polyurethane: 990011002, Viton: 990011006 |
Identification
| Parameter | Value |
|---|---|
| Valve function | Relief Valve with Integral Check |
| Series (frame sizes) | 1 |
| Cavity | T-11A |
Performance
| Parameter | Value |
|---|---|
| Capacity | 10 gpm (40 L/min) |
| Max operating pressure | 5000 psi (350 bar) |
| Setting range | A — 500 - 3000 psi (35 - 210 bar), 1000 psi (70 bar) Standard Setting, W — 800 - 4500 psi (55 - 315 bar), 1000 psi (70 bar) Standard Setting |
| Max leakage | 5 drops/min. (0,3 cc/min) |
Configuration
| Parameter | Value |
|---|---|
| Control / adjustment | C — Tamper Resistant - Factory Set, K — Handknob, L — Standard Screw Adjustment |
| Seal material | N — Buna-N, V — Viton |
| Material / coating | /AP — Stainless Steel, Passivated, /LH — Mild Steel, Zinc-Nickel |
Shipping & lead time
Sizes & part numbers
1 size- Sun Hydraulics part no.HRDB
- Series
- 1
- Cavity
- T-11A
- Capacity
- 10 gpm / 40 L/min
- Max pressure
- 5000 psi / 350 bar
Series — Frame size the cartridge is built in, as the maker numbers it; one series shares one cavity size. Cavity — Cavity the cartridge screws into, as the maker designates it. Capacity — Rated flow capacity as published, in US and metric units. Max pressure — Maximum pressure as the maker publishes it, in psi and bar.
Part numbers are the maker’s base model codes. The full ordering code adds letters for the control, setting range, seal and material options, and we confirm it with the quotation. Capacity and pressure are the maker’s published ratings for the cartridge; check them against the cavity body and the rest of the circuit.
What is the Sun Direct-Acting Relief Valve, After Check (HRDB) and what does it do?▾
How do I read the Sun model code for the Sun Direct-Acting Relief Valve, After Check (HRDB)?▾
What sizes and flow capacities does the Sun Direct-Acting Relief Valve, After Check come in?▾
What pressure and setting range does the Sun Direct-Acting Relief Valve, After Check have?▾
Which seal and material options does the Sun Direct-Acting Relief Valve, After Check come with?▾
How is the Sun Direct-Acting Relief Valve, After Check adjusted, and which control options are offered?▾
Which seal kit fits the Sun Direct-Acting Relief Valve, After Check (HRDB)?▾
Which cavity and installation torque does the Sun Direct-Acting Relief Valve, After Check need?▾
Where is the Sun Direct-Acting Relief Valve, After Check used?▾
How does the Sun Direct-Acting Relief Valve, After Check differ from the Sun Direct-Acting Relief Valve, Before Check?▾
Why combine the relief and the check on the Sun Direct-Acting Relief Valve, After Check?▾
Is the Sun Direct-Acting Relief Valve, After Check in stock in Dubai, and can you ship it worldwide?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations








