Skip to content
SUN HYDRAULICSIH-SUN-RB-AY

Sun Hydraulics Bi-Directional, Direct-Acting Relief Valve — RBDA, RBFA, RBUA, RBUY, Series 1, 2, 1C

Relief, Reducing & Sequence CartridgesEx-stock · delivery in 3 days
Sun Hydraulics RBDA bi-directional direct-acting relief valve, series 1, T-10A cavity — dimension drawing
VIEW 01·Sun Hydraulics RBDA bi-directional direct-acting relief valve, series 1, T-10A cavity — dimension drawing
1 / 3

Sun Hydraulics bi-directional direct-acting relief valve: RBDA, RBFA, RBUA, RBUY, series 1, 2, 1C, 20 gpm to 30 gpm (80 L/min to 120 L/min), T-10A, SC-10-02, T-3A cavities. Authorised Sun Hydraulics distributor, UAE — supplied direct from Sun.

Key features

  • Valve function: Bi-Directional Direct-Acting Relief Valve
  • Capacity: 20 gpm to 30 gpm (80 L/min to 120 L/min)
  • Max operating pressure: 5000 psi (350 bar)
  • Cavity: T-10A, SC-10-02, T-3A
Valve function
Bi-Directional Direct-Acting Relief Valve
Series (frame sizes)
1, 2, 1C
Cavity
T-10A, SC-10-02, T-3A
Ships in 24h
Order before 14:00 GST · Jebel Ali
24-month warranty
Manufacturer-backed · genuine parts
Engineering support
A real applications engineer

Product description

A direct-acting relief cartridge that limits the pressure difference between its two ports in either direction. When the differential exceeds the setting it opens and throttles flow, whichever port is higher — so one cartridge protects both sides of a motor or cylinder.

Sizes and cavities

Sun Hydraulics builds this valve in 4 sizes. The series sets the cavity it screws into and its flow capacity:

  • RBDA — series 1, T-10A cavity, 25 gpm (95 L/min)
  • RBUA — series 1C, SC-10-02 cavity, 20 gpm (80 L/min), common cavity
  • RBUY — series 1C, SC-10-02 cavity, 20 gpm (80 L/min), common cavity
  • RBFA — series 2, T-3A cavity, 30 gpm (120 L/min)

Sun builds its cartridges in frame sizes called series, from the small series 0 to series 4. The series fixes the cavity the valve screws into, so every function in one series shares that cavity, and a larger series carries more flow. Choose the smallest series that passes your flow at an acceptable pressure drop, using the performance curves, then the configuration options for control, setting and seals. If you are replacing a valve, the model code stamped on it gives the series and function directly, and the seal kits listed further down fit that series.

Ratings

  • Maximum operating pressure: 5000 psi (350 bar)
  • Maximum leakage: 10 drops/min. (0,7 cc/min), 30 drops/min. (30 drops/min)
  • Typical response time: 2 ms
  • Reseat: >85% of setting, >80% of setting

Configuration options

The letters after the base model code choose these options (shown for RBDA; a size may add or drop a choice):

  • Control: C — Tamper Resistant - Factory Set, L — Standard Screw Adjustment
  • Setting range: A — 1200 - 3000 psi (85-210 bar), 1500 psi (105 bar) Standard Setting, W — 3000 - 5000 psi (210 - 350 bar), 4000 psi (280 bar) Standard Setting
  • Seal material: N — Buna-N, V — Viton

Selection notes

  • Rated capacity differs by direction — see the size table and data.
  • Modulates inside the cartridge, which limits cavitation noise and erosion.

Where it is used

Cross-port relief on hydraulic motors and double-acting cylinders, and relief in common-cavity manifolds.

Installation and seal kits

Valve hex 7/8 in. (22,2 mm), 25 mm, 1 1/8 in. (28,6 mm); installation torque 30 - 35 lbf ft (41 - 47 Nm), 23 - 26 lbf ft (31 - 35 Nm), 45 - 50 lbf ft (61 - 68 Nm). Replacement seal kits — series 1: Buna: 990310007, Viton: 990310006; series 1C: Buna: 99C102007, Viton: 99C102006; series 2: Buna: 990303007, Polyurethane: 990303002, Viton: 990303006.

Ordering

Indus Hydraulics is an authorised Sun Hydraulics distributor in the UAE and supplies the range direct from Sun Hydraulics. Quote the base model and its configuration letters — for example RBDALAN — or send us the flow, pressure and duty and we select the valve. We confirm the full ordering code with the quotation.

Installation

ParameterValue
Valve hex size7/8 in. (22,2 mm), 25 mm, 1 1/8 in. (28,6 mm)
Installation torque30 - 35 lbf ft (41 - 47 Nm), 23 - 26 lbf ft (31 - 35 Nm), 45 - 50 lbf ft (61 - 68 Nm)
Seal kitsseries 1: Buna: 990310007, Viton: 990310006; series 1C: Buna: 99C102007, Viton: 99C102006; series 2: Buna: 990303007, Polyurethane: 990303002, Viton: 990303006
Weight.40 lb (0,20 kg) to .62 lb

Configuration

ParameterValue
Control / adjustmentC — Tamper Resistant - Factory Set, L — Standard Screw Adjustment
Seal materialN — Buna-N, V — Viton

Identification

ParameterValue
Valve functionBi-Directional Direct-Acting Relief Valve
Series (frame sizes)1, 2, 1C
CavityT-10A, SC-10-02, T-3A

Performance

ParameterValue
Capacity20 gpm to 30 gpm (80 L/min to 120 L/min)
Max operating pressure5000 psi (350 bar)
Setting rangeA — 1200 - 3000 psi (85-210 bar), 1500 psi (105 bar) Standard Setting, W — 3000 - 5000 psi (210 - 350 bar), 4000 psi (280 bar) Standard Setting
Max leakage10 drops/min. (0,7 cc/min), 30 drops/min. (30 drops/min)

Shipping & lead time

Lead TimeEx-stock from Dubai — delivered within 3 working days in the UAE. Export orders ship on the lane stated for the destination.

Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations

RELATED · OFTEN PAIRED WITH

Engineers viewing this also looked at