Skip to content
SUN HYDRAULICSIH-SUN-LH-A

Sun Hydraulics Bypass/Restrictive, Priority Modulating Element — LHDA, LHFA, LHHA, LHJA, Series 1 to 4

Flow Control CartridgesEx-stock · delivery in 3 days
Sun Hydraulics LHDA priority modulating element, series 1, T-31A cavity — dimension drawing
VIEW 01·Sun Hydraulics LHDA priority modulating element, series 1, T-31A cavity — dimension drawing
1 / 2

Sun Hydraulics priority modulating element: LHDA, LHFA, LHHA, LHJA, series 1 to 4, 15 gpm to 120 gpm (60 L/min to 480 L/min), T-31A, T-32A, T-33A, T-34A cavities. Authorised Sun Hydraulics distributor, UAE — supplied direct from Sun.

Key features

  • Valve function: Priority Modulating Element
  • Capacity: 15 gpm to 120 gpm (60 L/min to 480 L/min)
  • Max operating pressure: 5000 psi (350 bar)
  • Cavity: T-31A, T-32A, T-33A, T-34A
Valve function
Priority Modulating Element
Series (frame sizes)
1 to 4
Cavity
T-31A, T-32A, T-33A, T-34A
Ships in 24h
Order before 14:00 GST · Jebel Ali
24-month warranty
Manufacturer-backed · genuine parts
Engineering support
A real applications engineer

Product description

A bypass/restrictive modulating element that, with an external orifice, makes a priority flow control: inlet flow at port 3 goes to the priority outlet (port 2) first and the excess bypasses out of port 4. It controls pressure and flow on the priority side whatever the bypass pressure.

Sizes and cavities

Sun Hydraulics builds this valve in 4 sizes. The series sets the cavity it screws into and its flow capacity:

  • LHDA — series 1, T-31A cavity, 15 gpm (60 L/min)
  • LHFA — series 2, T-32A cavity, 30 gpm (120 L/min)
  • LHHA — series 3, T-33A cavity, 60 gpm (240 L/min)
  • LHJA — series 4, T-34A cavity, 120 gpm (480 L/min)

Sun builds its cartridges in frame sizes called series, from the small series 0 to series 4. The series fixes the cavity the valve screws into, so every function in one series shares that cavity, and a larger series carries more flow. Choose the smallest series that passes your flow at an acceptable pressure drop, using the performance curves, then the configuration options for control, setting and seals. If you are replacing a valve, the model code stamped on it gives the series and function directly, and the seal kits listed further down fit that series.

Ratings

  • Maximum operating pressure: 5000 psi (350 bar)

Configuration options

The letters after the base model code choose these options (shown for LHDA; a size may add or drop a choice):

  • Control: X — Not Adjustable
  • Seal material: N — Buna-N, V — Viton, E — EPDM

Option rules: If the seal is E, the control must be X.

Selection notes

  • Works in open- and closed-centre systems alike.

Where it is used

Running after-market attachments off a machine's existing hydraulics without an extra pump.

Installation and seal kits

Valve hex 7/8 in. (22,2 mm), 1 1/8 in. (28,6 mm), 1 1/4 in. (31,8 mm), 1 5/8 in. (41,3 mm); installation torque 30 - 35 lbf ft (41 - 47 Nm), 45 - 50 lbf ft (61 - 68 Nm), 150 - 160 lbf ft (203 - 217 Nm), 350 - 375 lbf ft (474 - 508 Nm). Replacement seal kits — series 1: Buna: 990031007, Polyurethane: 990031002, Viton: 990031006; series 2: Buna: 990032007, EPDM: 990032014, Polyurethane: 990032002, Viton: 990032006; series 3: Buna: 990033007, EPDM: 990033014, Polyurethane: 990033002, Viton: 990033006; series 4: Buna: 990034007, EPDM: 990034014, Polyurethane: 990034002, Viton: 990034006.

Ordering

Indus Hydraulics is an authorised Sun Hydraulics distributor in the UAE and supplies the range direct from Sun Hydraulics. Quote the base model and its configuration letters — for example LHDAXFN — or send us the flow, pressure and duty and we select the valve. We confirm the full ordering code with the quotation.

Identification

ParameterValue
Valve functionPriority Modulating Element
Series (frame sizes)1 to 4
CavityT-31A, T-32A, T-33A, T-34A

Performance

ParameterValue
Capacity15 gpm to 120 gpm (60 L/min to 480 L/min)
Max operating pressure5000 psi (350 bar)

Configuration

ParameterValue
Control / adjustmentX — Not Adjustable
Seal materialN — Buna-N, V — Viton, E — EPDM

Installation

ParameterValue
Valve hex size7/8 in. (22,2 mm), 1 1/8 in. (28,6 mm), 1 1/4 in. (31,8 mm), 1 5/8 in. (41,3 mm)
Installation torque30 - 35 lbf ft (41 - 47 Nm), 45 - 50 lbf ft (61 - 68 Nm), 150 - 160 lbf ft (203 - 217 Nm), 350 - 375 lbf ft (474 - 508 Nm)
Seal kitsseries 1: Buna: 990031007, Polyurethane: 990031002, Viton: 990031006; series 2: Buna: 990032007, EPDM: 990032014, Polyurethane: 990032002, Viton: 990032006; series 3: Buna: 990033007, EPDM: 990033014, Polyurethane: 990033002, Viton: 990033006; series 4: Buna: 990034007, EPDM: 990034014, Polyurethane: 990034002, Viton: 990034006
Weight.40 lb (0,20 kg) to 3.30 lb (1,50 kg)

Shipping & lead time

Lead TimeEx-stock from Dubai — delivered within 3 working days in the UAE. Export orders ship on the lane stated for the destination.

Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations

RELATED · OFTEN PAIRED WITH

Engineers viewing this also looked at