Sun Hydraulics Normally Open, Bi-Directional, Modulating Element — LHDT, LHFT, LHHT, Series 1 to 3

Sun Hydraulics normally open modulating element: LHDT, LHFT, LHHT, series 1 to 3, 15 gpm to 60 gpm (60 L/min to 240 L/min), T-31A, T-32A, T-33A cavities. Authorised Sun Hydraulics distributor, UAE — supplied direct from Sun.
Key features
- Valve function: Normally Open Modulating Element
- Capacity: 15 gpm to 60 gpm (60 L/min to 240 L/min)
- Max operating pressure: 5000 psi (350 bar)
- Cavity: T-31A, T-32A, T-33A
- Valve function
- Normally Open Modulating Element
- Series (frame sizes)
- 1 to 3
- Cavity
- T-31A, T-32A, T-33A
Product description
A normally open modulating element that acts as a restrictive compensator: with an external orifice it holds a constant pressure drop across it so flow stays steady as pressure changes. The bi-directional version compensates in both directions.
Sizes and cavities
Sun Hydraulics builds this valve in 3 sizes. The series sets the cavity it screws into and its flow capacity:
- LHDT — series 1, T-31A cavity, 15 gpm (60 L/min)
- LHFT — series 2, T-32A cavity, 30 gpm (120 L/min)
- LHHT — series 3, T-33A cavity, 60 gpm (240 L/min)
Sun builds its cartridges in frame sizes called series, from the small series 0 to series 4. The series fixes the cavity the valve screws into, so every function in one series shares that cavity, and a larger series carries more flow. Choose the smallest series that passes your flow at an acceptable pressure drop, using the performance curves, then the configuration options for control, setting and seals. If you are replacing a valve, the model code stamped on it gives the series and function directly, and the seal kits listed further down fit that series.
Ratings
- Maximum operating pressure: 5000 psi (350 bar)
Configuration options
The letters after the base model code choose these options (shown for LHDT; a size may add or drop a choice):
- Control: X — Not Adjustable
- Seal material: N — Buna-N, V — Viton, E — EPDM
Option rules: If the seal is E, the control must be X.
Selection notes
- A tuning control trims the pressure drop, and so the flow, by about ±25%.
Where it is used
Restrictive pressure-compensated flow controls built into a manifold.
Installation and seal kits
Valve hex 7/8 in. (22,2 mm), 1 1/8 in. (28,6 mm), 1 1/4 in. (31,8 mm); installation torque 30 - 35 lbf ft (41 - 47 Nm), 45 - 50 lbf ft (61 - 68 Nm), 150 - 160 lbf ft (203 - 217 Nm). Replacement seal kits — series 1: Buna: 990031007, EPDM: 990031014, Polyurethane: 990031002, Viton: 990031006; series 2: Buna: 990032007, EPDM: 990032014, Polyurethane: 990032002, Viton: 990032006; series 3: Buna: 990033007, EPDM: 990033014, Polyurethane: 990033002, Viton: 990033006.
Ordering
Indus Hydraulics is an authorised Sun Hydraulics distributor in the UAE and supplies the range direct from Sun Hydraulics. Quote the base model and its configuration letters — for example LHDTXFN — or send us the flow, pressure and duty and we select the valve. We confirm the full ordering code with the quotation.
Identification
| Parameter | Value |
|---|---|
| Valve function | Normally Open Modulating Element |
| Series (frame sizes) | 1 to 3 |
| Cavity | T-31A, T-32A, T-33A |
Performance
| Parameter | Value |
|---|---|
| Capacity | 15 gpm to 60 gpm (60 L/min to 240 L/min) |
| Max operating pressure | 5000 psi (350 bar) |
Configuration
| Parameter | Value |
|---|---|
| Control / adjustment | X — Not Adjustable |
| Seal material | N — Buna-N, V — Viton, E — EPDM |
Installation
| Parameter | Value |
|---|---|
| Valve hex size | 7/8 in. (22,2 mm), 1 1/8 in. (28,6 mm), 1 1/4 in. (31,8 mm) |
| Installation torque | 30 - 35 lbf ft (41 - 47 Nm), 45 - 50 lbf ft (61 - 68 Nm), 150 - 160 lbf ft (203 - 217 Nm) |
| Seal kits | series 1: Buna: 990031007, EPDM: 990031014, Polyurethane: 990031002, Viton: 990031006; series 2: Buna: 990032007, EPDM: 990032014, Polyurethane: 990032002, Viton: 990032006; series 3: Buna: 990033007, EPDM: 990033014, Polyurethane: 990033002, Viton: 990033006 |
| Weight | .40 lb (0,20 kg) to 1.60 lb (0,70 kg) |
Shipping & lead time
Sizes & part numbers
3 sizes- Sun Hydraulics part no.LHDT
- Series
- 1
- Cavity
- T-31A
- Capacity
- 15 gpm / 60 L/min
- Max pressure
- 5000 psi / 350 bar
- Sun Hydraulics part no.LHFT
- Series
- 2
- Cavity
- T-32A
- Capacity
- 30 gpm / 120 L/min
- Max pressure
- 5000 psi / 350 bar
- Sun Hydraulics part no.LHHT
- Series
- 3
- Cavity
- T-33A
- Capacity
- 60 gpm / 240 L/min
- Max pressure
- 5000 psi / 350 bar
Series — Frame size the cartridge is built in, as the maker numbers it; one series shares one cavity size. Cavity — Cavity the cartridge screws into, as the maker designates it. Capacity — Rated flow capacity as published, in US and metric units. Max pressure — Maximum pressure as the maker publishes it, in psi and bar.
Part numbers are the maker’s base model codes. The full ordering code adds letters for the control, setting range, seal and material options, and we confirm it with the quotation. Capacity and pressure are the maker’s published ratings for the cartridge; check them against the cavity body and the rest of the circuit.
What is the Sun Hydraulics LHDT, LHFT, LHHT normally open modulating element used for?▾
Which sizes and versions does the Sun Hydraulics LHDT, LHFT, LHHT normally open modulating element come in?▾
How do I read the Sun Hydraulics model code LHDTXFN for the LHDT, LHFT, LHHT normally open modulating element?▾
What is the maximum operating pressure of the Sun Hydraulics LHDT, LHFT, LHHT normally open modulating element?▾
What flow capacity does the Sun Hydraulics LHDT, LHFT, LHHT normally open modulating element have by series?▾
Which seal materials and body finishes does the Sun Hydraulics LHDT, LHFT, LHHT normally open modulating element come with?▾
Which cavity does the Sun Hydraulics LHDT, LHFT, LHHT normally open modulating element fit?▾
Which seal kit fits the Sun Hydraulics LHDT, LHFT, LHHT normally open modulating element?▾
How is the Sun Hydraulics LHDT, LHFT, LHHT normally open modulating element installed?▾
Where is the Sun Hydraulics LHDT, LHFT, LHHT normally open modulating element used?▾
Sun Hydraulics LHDT, LHFT, LHHT or LPBC, LPDC, LPFC, LPHC, LPJC: what is the difference?▾
Do you stock the Sun Hydraulics LHDT, LHFT, LHHT in Dubai?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations








