Skip to content
SUN HYDRAULICSIH-SUN-LP-A

Sun Hydraulics Normally Open, Modulating Element with Pilot Source from Port 1 — LPBA, LPDA, LPFA, LPHA, LPJA, Series 0 to 4

Flow Control CartridgesEx-stock · delivery in 3 days
Sun Hydraulics LPDA normally open modulating element with pilot source, series 1, T-11A cavity — dimension drawing
VIEW 01·Sun Hydraulics LPDA normally open modulating element with pilot source, series 1, T-11A cavity — dimension drawing
1 / 2

Sun Hydraulics normally open modulating element with pilot source: LPBA, LPDA, LPFA, LPHA, LPJA, series 0 to 4, 7.5 gpm to 120 gpm (30 L/min to 480 L/min), T-163A, T-11A, T-2A, T-17A, T-19A cavities. Authorised Sun Hydraulics distributor, UAE — supplied direct from Sun.

Key features

  • Valve function: Normally Open Modulating Element with Pilot Source
  • Capacity: 7.5 gpm to 120 gpm (30 L/min to 480 L/min)
  • Max operating pressure: 5000 psi (350 bar)
  • Cavity: T-163A, T-11A, T-2A, T-17A, T-19A
Valve function
Normally Open Modulating Element with Pilot Source
Series (frame sizes)
0 to 4
Cavity
T-163A, T-11A, T-2A, T-17A, T-19A
Ships in 24h
Order before 14:00 GST · Jebel Ali
24-month warranty
Manufacturer-backed · genuine parts
Engineering support
A real applications engineer

Product description

A normally open modulating element with an internal orifice from port 1 to port 3, used as the main stage of a reducing valve controlled by a pilot relief or pilot solenoid valve. The T-8A version carries its own pilot cavity.

Sizes and cavities

Sun Hydraulics builds this valve in 5 sizes. The series sets the cavity it screws into and its flow capacity:

  • LPBA — series 0, T-163A cavity, 7.5 gpm (30 L/min), 0-series
  • LPDA — series 1, T-11A cavity, 15 gpm (60 L/min)
  • LPFA — series 2, T-2A cavity, 30 gpm (120 L/min)
  • LPHA — series 3, T-17A cavity, 60 gpm (240 L/min)
  • LPJA — series 4, T-19A cavity, 120 gpm (480 L/min)

Sun builds its cartridges in frame sizes called series, from the small series 0 to series 4. The series fixes the cavity the valve screws into, so every function in one series shares that cavity, and a larger series carries more flow. Choose the smallest series that passes your flow at an acceptable pressure drop, using the performance curves, then the configuration options for control, setting and seals. If you are replacing a valve, the model code stamped on it gives the series and function directly, and the seal kits listed further down fit that series.

Ratings

  • Maximum operating pressure: 5000 psi (350 bar)

Configuration options

The letters after the base model code choose these options (shown for LPDA; a size may add or drop a choice):

  • Control: L — Tuning Adjustment, X — Not Adjustable
  • Seal material: N — Buna-N, V — Viton
  • Material / coating: /AP — Stainless Steel, Passivated

Option rules: If the control is L, the range must be D; If the modifier is /AP, the control must be X.

Selection notes

  • Fit the main stage first, then the T-8A pilot, each to its own torque.

Where it is used

High-flow remotely or electronically controlled reducing functions.

Installation and seal kits

Valve hex 3/4 in. (19,1 mm), 7/8 in. (22,2 mm), 1 1/8 in. (28,6 mm), 1 1/4 in. (31,8 mm), 1 5/8 in. (41,3 mm); installation torque 20 - 25 lbf ft (27 - 33 Nm), 30 - 35 lbf ft (41 - 47 Nm), 45 - 50 lbf ft (61 - 68 Nm), 150 - 160 lbf ft (203 - 217 Nm), 350 - 375 lbf ft (474 - 508 Nm). Replacement seal kits — series 0: Buna: 990163007, Polyurethane: 990163002, Viton: 990163006; series 1: Buna: 990011007, Polyurethane: 990011002, Viton: 990011006; series 2: Buna: 990202007, Polyurethane: 990002002, Viton: 990202006; series 3: Buna: 990017007, Polyurethane: 990017002, Viton: 990017006; series 4: Buna: 990019007, Polyurethane: 990019002, Viton: 990019006.

Ordering

Indus Hydraulics is an authorised Sun Hydraulics distributor in the UAE and supplies the range direct from Sun Hydraulics. Quote the base model and its configuration letters — for example LPDAXHN — or send us the flow, pressure and duty and we select the valve. We confirm the full ordering code with the quotation.

Installation

ParameterValue
Valve hex size3/4 in. (19,1 mm), 7/8 in. (22,2 mm), 1 1/8 in. (28,6 mm), 1 1/4 in. (31,8 mm), 1 5/8 in. (41,3 mm)
Installation torque20 - 25 lbf ft (27 - 33 Nm), 30 - 35 lbf ft (41 - 47 Nm), 45 - 50 lbf ft (61 - 68 Nm), 150 - 160 lbf ft (203 - 217 Nm), 350 - 375 lbf ft (474 - 508 Nm)
Seal kitsseries 0: Buna: 990163007, Polyurethane: 990163002, Viton: 990163006; series 1: Buna: 990011007, Polyurethane: 990011002, Viton: 990011006; series 2: Buna: 990202007, Polyurethane: 990002002, Viton: 990202006; series 3: Buna: 990017007, Polyurethane: 990017002, Viton: 990017006; series 4: Buna: 990019007, Polyurethane: 990019002, Viton: 990019006
Weight1.60 lb (0,70 kg)

Configuration

ParameterValue
Control / adjustmentL — Tuning Adjustment, X — Not Adjustable
Seal materialN — Buna-N, V — Viton
Material / coating/AP — Stainless Steel, Passivated

Identification

ParameterValue
Valve functionNormally Open Modulating Element with Pilot Source
Series (frame sizes)0 to 4
CavityT-163A, T-11A, T-2A, T-17A, T-19A

Performance

ParameterValue
Capacity7.5 gpm to 120 gpm (30 L/min to 480 L/min)
Max operating pressure5000 psi (350 bar)

Shipping & lead time

Lead TimeEx-stock from Dubai — delivered within 3 working days in the UAE. Export orders ship on the lane stated for the destination.

Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations

RELATED · OFTEN PAIRED WITH

Engineers viewing this also looked at