Skip to content
SUN HYDRAULICSIH-SUN-RS-E

Sun Hydraulics Air-Controlled, Pilot-Operated, Balanced Piston Sequence Valve — RSFE, RSHE, RSJE, Series 2 to 4

Relief, Reducing & Sequence CartridgesEx-stock · delivery in 3 days
Sun Hydraulics RSJE air-controlled sequence valve, series 4, T-19A cavity — dimension drawing
VIEW 01·Sun Hydraulics RSJE air-controlled sequence valve, series 4, T-19A cavity — dimension drawing
1 / 3

Sun Hydraulics air-controlled sequence valve, 20:1 pilot ratio: RSFE, RSHE, RSJE, series 2 to 4, 30 gpm to 120 gpm (120 L/min to 480 L/min), T-2A, T-17A, T-19A cavities. Authorised Sun Hydraulics distributor, UAE — supplied direct from Sun.

Key features

  • Valve function: Air-Controlled Sequence Valve
  • Capacity: 30 gpm to 120 gpm (120 L/min to 480 L/min)
  • Max operating pressure: 2000 psi (140 bar)
  • Cavity: T-2A, T-17A, T-19A
Valve function
Air-Controlled Sequence Valve
Series (frame sizes)
2 to 4
Cavity
T-2A, T-17A, T-19A
Ships in 24h
Order before 14:00 GST · Jebel Ali
24-month warranty
Manufacturer-backed · genuine parts
Engineering support
A real applications engineer

Product description

A pilot-operated, balanced-piston sequence valve set by compressed air on a diaphragm. Air enters at the hex end and the hydraulic setting follows it at 20:1.

Sizes and cavities

Sun Hydraulics builds this valve in 3 sizes. The series sets the cavity it screws into and its flow capacity:

  • RSFE — series 2, T-2A cavity, 30 gpm (120 L/min)
  • RSHE — series 3, T-17A cavity, 60 gpm (240 L/min)
  • RSJE — series 4, T-19A cavity, 120 gpm (480 L/min)

Sun builds its cartridges in frame sizes called series, from the small series 0 to series 4. The series fixes the cavity the valve screws into, so every function in one series shares that cavity, and a larger series carries more flow. Choose the smallest series that passes your flow at an acceptable pressure drop, using the performance curves, then the configuration options for control, setting and seals. If you are replacing a valve, the model code stamped on it gives the series and function directly, and the seal kits listed further down fit that series.

Ratings

  • Pilot ratio: 20:1
  • Maximum operating pressure: 2000 psi (140 bar)
  • Maximum leakage: 3 in³/min. (50 cc/min), 4 in³/min. (65 cc/min), 5 in³/min. (80 cc/min)
  • Typical response time: 10 ms

Configuration options

The letters after the base model code choose these options (shown for RSJE; a size may add or drop a choice):

  • Control: B — External 4-SAE Port
  • Setting range: B — 50 - 1500 psi (3,5 - 105 bar)
  • Seal material: N — Buna-N, V — Viton

Selection notes

  • Lower maximum operating pressure than spring-set valves — check the rating.

Where it is used

Pneumatically set sequence and pressure functions.

Installation and seal kits

Valve hex 1 1/8 in. (28,6 mm), 1 1/4 in. (31,8 mm), 1 5/8 in. (41,3 mm); installation torque 45 - 50 lbf ft (61 - 68 Nm), 150 - 160 lbf ft (203 - 217 Nm), 350 - 375 lbf ft (474 - 508 Nm). Replacement seal kits — series 2: Buna: 990202007, Polyurethane: 990002002, Viton: 990202006; series 3: Buna: 990017007, Polyurethane: 990017002, Viton: 990017006; series 4: Buna: 990019007, Polyurethane: 990019002, Viton: 990019006.

Ordering

Indus Hydraulics is an authorised Sun Hydraulics distributor in the UAE and supplies the range direct from Sun Hydraulics. Quote the base model and its configuration letters — for example RSJEBBN — or send us the flow, pressure and duty and we select the valve. We confirm the full ordering code with the quotation.

Installation

ParameterValue
Valve hex size1 1/8 in. (28,6 mm), 1 1/4 in. (31,8 mm), 1 5/8 in. (41,3 mm)
Installation torque45 - 50 lbf ft (61 - 68 Nm), 150 - 160 lbf ft (203 - 217 Nm), 350 - 375 lbf ft (474 - 508 Nm)
Seal kitsseries 2: Buna: 990202007, Polyurethane: 990002002, Viton: 990202006; series 3: Buna: 990017007, Polyurethane: 990017002, Viton: 990017006; series 4: Buna: 990019007, Polyurethane: 990019002, Viton: 990019006
Weight.60 lb (0,30 kg) to 3.10 lb (1,40 kg)

Identification

ParameterValue
Valve functionAir-Controlled Sequence Valve
Series (frame sizes)2 to 4
CavityT-2A, T-17A, T-19A

Configuration

ParameterValue
Control / adjustmentB — External 4-SAE Port
Seal materialN — Buna-N, V — Viton

Performance

ParameterValue
Capacity30 gpm to 120 gpm (120 L/min to 480 L/min)
Max operating pressure2000 psi (140 bar)
Pilot ratio20:1
Setting rangeB — 50 - 1500 psi (3,5 - 105 bar)
Max leakage3 in³/min. (50 cc/min), 4 in³/min. (65 cc/min), 5 in³/min. (80 cc/min)

Shipping & lead time

Lead TimeEx-stock from Dubai — delivered within 3 working days in the UAE. Export orders ship on the lane stated for the destination.

Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations

RELATED · OFTEN PAIRED WITH

Engineers viewing this also looked at