Skip to content
SUN HYDRAULICSIH-SUN-RV-D8

Sun Hydraulics Ventable, Pilot-Operated, Balanced Piston Relief Main Stage with Integral T-8A Control Cavity and Drain to Port 4 — RVCD8, RVED8, RVGD8, RVID8, Series 1 to 4

Relief, Reducing & Sequence CartridgesEx-stock · delivery in 3 days
Sun Hydraulics RVCD8 relief main stage with integral T-8A pilot cavity, series 1, T-21A cavity — dimension drawing
VIEW 01·Sun Hydraulics RVCD8 relief main stage with integral T-8A pilot cavity, series 1, T-21A cavity — dimension drawing
1 / 3

Sun Hydraulics relief main stage with integral T-8A pilot cavity: RVCD8, RVED8, RVGD8, RVID8, series 1 to 4, 15 gpm to 120 gpm (60 L/min to 480 L/min), T-21A, T-22A, T-23A, T-24A cavities. Authorised Sun Hydraulics distributor, UAE — supplied direct from Sun.

Key features

  • Valve function: Relief Main Stage with Integral T-8A Pilot Cavity
  • Capacity: 15 gpm to 120 gpm (60 L/min to 480 L/min)
  • Max operating pressure: 5000 psi (350 bar)
  • Cavity: T-21A, T-22A, T-23A, T-24A
Valve function
Relief Main Stage with Integral T-8A Pilot Cavity
Series (frame sizes)
1 to 4
Cavity
T-21A, T-22A, T-23A, T-24A
Ships in 24h
Order before 14:00 GST · Jebel Ali
24-month warranty
Manufacturer-backed · genuine parts
Engineering support
A real applications engineer

Product description

A pilot-operated relief main stage with its own T-8A control cavity machined into the cartridge. Any T-8A pressure-control cartridge screwed into that cavity sets the relief pressure — a manual pilot relief, an electro-proportional pilot, or an air-controlled one — so the same main stage can be adjusted locally or controlled remotely.

Sizes and cavities

Sun Hydraulics builds this valve in 4 sizes. The series sets the cavity it screws into and its flow capacity:

  • RVCD8 — series 1, T-21A cavity, 15 gpm (60 L/min)
  • RVED8 — series 2, T-22A cavity, 30 gpm (120 L/min)
  • RVGD8 — series 3, T-23A cavity, 60 gpm (240 L/min)
  • RVID8 — series 4, T-24A cavity, 120 gpm (480 L/min)

Sun builds its cartridges in frame sizes called series, from the small series 0 to series 4. The series fixes the cavity the valve screws into, so every function in one series shares that cavity, and a larger series carries more flow. Choose the smallest series that passes your flow at an acceptable pressure drop, using the performance curves, then the configuration options for control, setting and seals. If you are replacing a valve, the model code stamped on it gives the series and function directly, and the seal kits listed further down fit that series.

Ratings

  • Maximum operating pressure: 5000 psi (350 bar)
  • Typical response time: 10 ms

Configuration options

The letters after the base model code choose these options (shown for RVCD8; a size may add or drop a choice):

  • Setting range: D — 25 psi (1,7 bar), W — 100 psi (7 bar)
  • Seal material: N — Buna-N, V — Viton, E — EPDM

Selection notes

  • Supplied as the main stage; the T-8A pilot cartridge is chosen separately.
  • The pilot cartridge's setting determines the pressure difference across the valve.

Where it is used

Building remotely or electronically controlled relief functions without a separate pilot body.

Installation and seal kits

Valve hex 7/8 in. (22,2 mm), 1 1/8 in. (28,6 mm), 1 1/4 in. (31,8 mm), 1 5/8 in. (41,3 mm); installation torque 30 - 35 lbf ft (41 - 47 Nm), 45 - 50 lbf ft (61 - 68 Nm), 150 - 160 lbf ft (203 - 217 Nm), 350 - 375 lbf ft (474 - 508 Nm). Replacement seal kits — series 1: Buna: 990021007, EPDM: 990021014, Polyurethane: 990021002, Viton: 990021006; series 2: Buna: 990022007, EPDM: 990022014, Polyurethane: 990022002, Viton: 990022006; series 3: Buna: 990023007, EPDM: 990023014, Polyurethane: 990023002, Viton: 990023006; series 4: Buna: 990024007, Polyurethane: 990024002, Viton: 990024006.

Ordering

Indus Hydraulics is an authorised Sun Hydraulics distributor in the UAE and supplies the range direct from Sun Hydraulics. Quote the base model and its configuration letters — for example RVCD8WN — or send us the flow, pressure and duty and we select the valve. We confirm the full ordering code with the quotation.

Identification

ParameterValue
Valve functionRelief Main Stage with Integral T-8A Pilot Cavity
Series (frame sizes)1 to 4
CavityT-21A, T-22A, T-23A, T-24A

Installation

ParameterValue
Valve hex size7/8 in. (22,2 mm), 1 1/8 in. (28,6 mm), 1 1/4 in. (31,8 mm), 1 5/8 in. (41,3 mm)
Installation torque30 - 35 lbf ft (41 - 47 Nm), 45 - 50 lbf ft (61 - 68 Nm), 150 - 160 lbf ft (203 - 217 Nm), 350 - 375 lbf ft (474 - 508 Nm)
Seal kitsseries 1: Buna: 990021007, EPDM: 990021014, Polyurethane: 990021002, Viton: 990021006; series 2: Buna: 990022007, EPDM: 990022014, Polyurethane: 990022002, Viton: 990022006; series 3: Buna: 990023007, EPDM: 990023014, Polyurethane: 990023002, Viton: 990023006; series 4: Buna: 990024007, Polyurethane: 990024002, Viton: 990024006
Weight.40 lb (0,20 kg) to 3.10 lb (1,40 kg)

Performance

ParameterValue
Capacity15 gpm to 120 gpm (60 L/min to 480 L/min)
Max operating pressure5000 psi (350 bar)
Setting rangeD — 25 psi (1,7 bar), W — 100 psi (7 bar)

Configuration

ParameterValue
Seal materialN — Buna-N, V — Viton, E — EPDM

Shipping & lead time

Lead TimeEx-stock from Dubai — delivered within 3 working days in the UAE. Export orders ship on the lane stated for the destination.

Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations

RELATED · OFTEN PAIRED WITH

Engineers viewing this also looked at