Eye Swivel — JIS Type, Single Eye
Eye Swivel (JIS type), in 5 sizes, 13 mm to 29 mm, WLL 1 to 5 t. Indus part numbers, manufacturer's test certificate.
Key features
- Product type: Eye Swivel
- Pattern / standard: JIS type
- Size range: 13 mm to 29 mm
- Working load limit: 1 to 5 t
- Size range
- 13 mm to 29 mm
- Working load limit
- 1 to 5 t
- Material
- Carbon steel
- Finish
- Hot-dip galvanized / electro-galvanized
Product description
Master links, rings and swivels gather sling legs onto a crane hook, join chain and stop rigging twisting. Built to the JIS pattern. Carbon steel, hot-dip galvanized / electro-galvanized.
Sizes and ratings
5 sizes, 13 mm to 29 mm. Working load limit 1 to 5 t. Every size has its own Indus part number in the table below, with the loads in the unit the manufacturer rates them in.
The lettered dimensions in the table refer to the dimension drawing shown with this product.
Manufacturer's data
- Drop forged.
Choosing a size
A master link must take every leg of the sling at once and fit the crane hook without binding. Swivels let the rigging untwist but are not rotating bearings under full load.
Ordering
Quote the Indus part number from the size table, or send the size and rating you need. Each consignment ships with the manufacturer's test certificate; say on the RFQ if your site needs anything more.
Identification
| Parameter | Value |
|---|---|
| Product type | Eye Swivel |
| Pattern / standard | JIS type |
| Sizes | 5 |
Dimensions
| Parameter | Value |
|---|---|
| Size range | 13 mm to 29 mm |
Performance
| Parameter | Value |
|---|---|
| Working load limit | 1 to 5 t |
Construction
| Parameter | Value |
|---|---|
| Material | Carbon steel |
| Finish | Hot-dip galvanized / electro-galvanized |
Compliance
| Parameter | Value |
|---|---|
| Certification | Manufacturer's test certificate |
Shipping & lead time
Sizes & part numbers
5 sizes| Indus part no. | Size | WLL (t) | A (mm) | B (mm) | C (mm) | D (mm) | E (mm) | G (mm) | L (mm) | Weight (kg) |
|---|---|---|---|---|---|---|---|---|---|---|
| IH-LR-RL-ESJISSE-13MM | 13 mm | 1 | 60 | 35 | 36 | 17 | 41 | 48 | 100.5 | 0.5 |
| IH-LR-RL-ESJISSE-16MM | 16 mm | 1.5 | 72 | 43 | 40 | 23 | 55 | 60 | 124 | 0.94 |
| IH-LR-RL-ESJISSE-19MM | 19 mm | 2.5 | 82 | 45 | 45 | 26 | 64 | 66 | 142 | 1.46 |
| IH-LR-RL-ESJISSE-22MM | 22 mm | 5 | 93 | 53 | 49 | 29 | 73 | 75 | 170 | 2.21 |
| IH-LR-RL-ESJISSE-29MM | 29 mm | 3 | 116 | 70 | 58 | 38 | 96 | — | 196 | 4.4 |
Size — Nominal size as the manufacturer states it. WLL — Working load limit — the most the part may carry in service, as the manufacturer rates it. A — Dimension A on the manufacturer dimension drawing. B — Dimension B on the manufacturer dimension drawing. C — Dimension C on the manufacturer dimension drawing. D — Dimension D on the manufacturer dimension drawing. E — Dimension E on the manufacturer dimension drawing. G — Dimension G on the manufacturer dimension drawing. L — Dimension L on the manufacturer dimension drawing. Weight — Weight as the manufacturer publishes it. Ask us for the dimension drawing if you need it stamped.
WLL is the most the part may carry in service. Proof and breaking loads are test figures — never lift to them. Each load is shown in the unit the manufacturer rates the part in, and a size ships with the manufacturer’s test certificate.
What sizes does the eye swivel come in?▾
What is the working load limit?▾
Can a swivel rotate under load?▾
Do the parts come with a test certificate?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 126 destinations
Engineers viewing this also looked at
Chain Swivel — G-401 Pattern, Hot-Dip Galvanized
Jaw End Swivel
Weldless Pear Link — Carbon and Alloy
Repair Link — Zinc Plated
Regular Swivel — Eye and Eye
Stainless Steel Double Ring
Stainless Steel D Ring
