Parker B9 Series Low Pressure Thermoplastic Fuel Transfer Hoses

Parker B9 Series Low Pressure Thermoplastic Fuel Transfer Hoses: 3 part numbers.
Product description
Parker B9 Series Low Pressure Thermoplastic Fuel Transfer Hoses: 3 part numbers.
Specification
- Type: Fuel Hose
- Material: Thermoplastic
- Pressure stated by the maker: 250 psi (17 bar)
- Part numbers: 3
Sizes and part numbers
The Sizes & Part Numbers tab lists every Parker part number in this range with its ratings. Ratings vary by size — check the row for the part you order.
Choosing the hose
Select hose on working pressure, bore, temperature and fluid. The working pressure in the size table is the maximum for continuous duty; burst pressure is a test figure, not a working limit. End fittings must be from the series the hose maker approves for that hose.
How to order
Quote the Parker part number. Price and lead time are confirmed with the quotation.
Specifications
| Parameter | Value |
|---|---|
| Division | Parflex |
| Group | Fluid Connector |
| Inch - Metric | Inch |
Shipping & lead time
Sizes & part numbers
3 sizes- Parker Hannifin part no.B904
- Description
- Fuel Transfer Hose, Low Pressure, Thermoplastic
- Working pressure (bar)
- 17
- Parker Hannifin part no.B905
- Description
- Fuel Transfer Hose, Low Pressure, Thermoplastic
- Working pressure (bar)
- 17
- Parker Hannifin part no.B906
- Description
- Fuel Transfer Hose, Low Pressure, Thermoplastic
- Working pressure (bar)
- 17
Description — What this part number is, as the manufacturer lists it. Ask us for the dimension drawing if you need it stamped.
Working pressure is the manufacturer’s published rating for the fitting itself. An assembly is limited by its lowest-rated component, so check it against the hose, the tube and the port you are mating to.
What is the Parker B9 Series thermoplastic hose and what is it used for?▾
How do I read the part numbers of the Parker B9 Series, such as B904?▾
Which sizes does the Parker B9 Series come in?▾
How do I choose the size of Parker B9 hose for my pressure?▾
What is the working pressure of Parker B9 Series hose?▾
What is Parker B9 Series hose made from?▾
Which standard does Parker B9 Series hose follow?▾
Which fittings go on Parker B9 Series hose?▾
How do I route and install Parker B9 Series hose?▾
How does the Parker B9 Series compare with the Parker 540P Series?▾
Where does the Parker B9 Series ship from, and what are the export details?▾
Do you stock Parker B9 Series hose for export from Dubai?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
From the blog
Written about this range
Specification & standards
Hydraulic hose: the complete guide to constructions, standards, sizes and pressure
Braid, spiral, compact, thermoplastic and PTFE; SAE 100R against EN 853, 856 and 857; dash sizes and pressure by bore. The hydraulic hose guide, with every figure from the grades we stock.
8 min read
Assembly, crimping & certification
Thermoplastic hose fittings: R7, R8 and R18 hose, non-conductive hose and the 56 Series crimp ends
An orange thermoplastic hose on a bucket truck is not orange for show: Parker’s 518D is made and marked non-conductive to SAE J517 for work near power lines — and Parker warns never to assume any hose is non-conductive unless it is branded so. Thermoplastic R7, R8 and R18 hose, what each is for and rated at, the Parker 56 Series crimp fittings and THY series ends that go on them, and how to assemble them.
6 min read
Failure analysis
Swollen or hardened tube: reading fluid incompatibility off the failure
Cut a failed hose open and the tube tells you whether the fluid was wrong. Swollen and soft is one problem, shrunken and brittle is the opposite one, and both mean the hose and the fluid were never suited.
3 min read








