R8 Thermoplastic Hydraulic Hose
Double-fibre-braid thermoplastic hose with R2-class working pressure and 30% lighter than rubber. 1/8" – 1" (DN3 – DN25).
Key features
- Applicable Standard: SAE 100R8
- Construction Type: fiber-braid-thermoplastic
- Bore Size Range: 1/8" – 1" (DN3 – DN25)
- Max Working Pressure: 350 bar
- Min Burst Pressure: 1400 bar
- Min Operating Temperature: -40 °C
- Max Operating Temperature: 93 °C
- Reinforcement: Two layers of synthetic-fibre braid
- Applicable Standard
- SAE 100R8
- Construction Type
- fiber-braid-thermoplastic
- Bore Size Range
- 1/8" – 1" (DN3 – DN25)
- Max Working Pressure
- 350 bar
- Min Burst Pressure
- 1400 bar
- Min Operating Temperature
- -40 °C
Product description
The R8 Thermoplastic Hydraulic Hose Double-fibre-braid thermoplastic hose with R2-class working pressure and 30% lighter than rubber. Conforms to SAE 100R8.
Construction
- Tube: Polyamide (nylon), hydraulic-fluid-resistant
- Reinforcement: Two layers of synthetic-fibre braid
- Cover: Polyurethane, abrasion- and weather-resistant, smooth
Performance
Working pressures up to 350 bar at the smallest bore, with a minimum burst of 1400 bar (safety factor 4:1). Continuous service from -40°C to 93°C, with the upper limit reduced for aggressive fluids — ask for a fluid compatibility chart if needed.
Applications
- Aerial work platforms, scissor lifts, articulated booms
- Hydraulic equipment in weight-sensitive applications
- Replacement of R2 2SN where flex life and weight matter
- Control circuits requiring tight routing and high pressure
Compliance
- SAE 100R8
Also available in
The same SAE 100R8 grade is stocked in Eaton Aeroquip and Eaton Winner in addition to the Parker Hannifin reference shown here. Tell us your brand preference on the RFQ and we will quote accordingly.
Companion grades
For lower-pressure thermoplastic see R7. For PTFE at high temperature see R14. For traditional rubber-and-wire R2 2SN, see the hydraulic-hoses category.
Identification
| Parameter | Value |
|---|---|
| Applicable Standard | SAE 100R8 |
| Construction Type | fiber-braid-thermoplastic |
Dimensions
| Parameter | Value |
|---|---|
| Bore Size Range | 1/8" – 1" (DN3 – DN25) |
| Min Bend Radius | tighter than equivalent rubber hose at same pressure |
Performance
| Parameter | Value |
|---|---|
| Max Working Pressure | 350 bar |
| Min Burst Pressure | 1400 bar |
| Safety Factor | 4:1 |
| Min Operating Temperature | -40 °C |
| Max Operating Temperature | 93 °C |
Construction
| Parameter | Value |
|---|---|
| Reinforcement | Two layers of synthetic-fibre braid |
| Tube (Inner) Material | Polyamide (nylon), hydraulic-fluid-resistant |
| Cover Material | Polyurethane, abrasion- and weather-resistant |
| Cover Finish | smooth |
Compliance
| Parameter | Value |
|---|---|
| Conductivity | non-conductive |
Commercial
| Parameter | Value |
|---|---|
| Sold By | per-metre |
Shipping & lead time
What standard does this hose comply with?▾
What is the maximum working pressure?▾
What temperature range is supported?▾
What bore sizes are available?▾
Is this hose conductive?▾
What end fittings are recommended?▾
How is this hose sold?▾
What is the typical lead time?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 126 destinations
From the blog
