Kenter Shackle — Grades U2 and U3

Kenter Shackle (ISO 1704), in 61 sizes, 11 mm to 162 mm. Load rating on request. Indus part numbers.
Key features
- Product type: Kenter Shackle
- Pattern / standard: ISO 1704
- Size range: 11 mm to 162 mm
- Size range
- 11 mm to 162 mm
- Material
- Steel CM490/CM690
- Finish
- Hot-dip galvanized | electro-galvanized | black painting
Product description
Anchor chain and the shackles and swivels that join it. Made to ISO 1704. Steel CM490/CM690, hot-dip galvanized | electro-galvanized | black painting.
Sizes
61 sizes, 11 mm to 162 mm. Every size has its own Indus part number in the table below.
No load rating is published for this range. Tell us the duty and we will confirm the rating with the quotation. Do not use it to lift until you have that rating in writing.
Choosing a size
Specify by nominal diameter, grade (U1, U2 or U3) and the classification society the vessel is built to; accessories must match the chain grade and size.
Ordering
Quote the Indus part number from the size table, or send the size and rating you need.
Identification
| Parameter | Value |
|---|---|
| Product type | Kenter Shackle |
| Pattern / standard | ISO 1704 |
| Sizes | 61 |
Dimensions
| Parameter | Value |
|---|---|
| Size range | 11 mm to 162 mm |
Construction
| Parameter | Value |
|---|---|
| Material | Steel CM490/CM690 |
| Finish | Hot-dip galvanized | electro-galvanized | black painting |
Shipping & lead time
Sizes & part numbers
61 sizes- Indus part no.IH-LR-AC-KSGU2U3-11MM
- Size
- 11 mm
- Weight (kg)
- 0.47
- Indus part no.IH-LR-AC-KSGU2U3-50MM
- Size
- 50 mm
- Weight (kg)
- 19
- Indus part no.IH-LR-AC-KSGU2U3-100MM
- Size
- 100 mm
- Weight (kg)
- 146
- Indus part no.IH-LR-AC-KSGU2U3-12P5MM
- Size
- 12.5 mm
- Weight (kg)
- 0.54
- Indus part no.IH-LR-AC-KSGU2U3-52MM
- Size
- 52 mm
- Weight (kg)
- 20.3
- Indus part no.IH-LR-AC-KSGU2U3-102MM
- Size
- 102 mm
- Weight (kg)
- 158
- Indus part no.IH-LR-AC-KSGU2U3-14MM
- Size
- 14 mm
- Weight (kg)
- 0.6
- Indus part no.IH-LR-AC-KSGU2U3-54MM
- Size
- 54 mm
- Weight (kg)
- 23.7
Show all 61 sizesShow fewer sizes
Size — Nominal size as the manufacturer states it. Weight — Weight as the manufacturer publishes it. Ask us for the dimension drawing if you need it stamped.
WLL is the most the part may carry in service. Proof and breaking loads are test figures — never lift to them. Each load is shown in the unit the manufacturer rates the part in, and a size ships with the manufacturer’s test certificate.
What is Kenter Shackle, Grades U2 and U3 used for?▾
How do I read an Indus part number for Kenter Shackle, Grades U2 and U3, such as IH-LR-AC-KSGU2U3-11MM?▾
What sizes does Kenter Shackle, Grades U2 and U3 come in?▾
How do I choose the right size of Kenter Shackle, Grades U2 and U3?▾
What load rating does Kenter Shackle, Grades U2 and U3 have?▾
What is Kenter Shackle, Grades U2 and U3 made from, and what finish does it have?▾
What standard and certificate apply to Kenter Shackle, Grades U2 and U3?▾
What does Kenter Shackle, Grades U2 and U3 connect to or work with?▾
How should Kenter Shackle, Grades U2 and U3 be inspected and looked after?▾
How does Kenter Shackle, Grades U2 and U3 differ from End Shackle, D Type — Grades U2 and U3?▾
How are Kenter Shackle, Grades U2 and U3 shipped, and can they be exported from Dubai?▾
Do you keep Kenter Shackle, Grades U2 and U3 in stock in Dubai?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
From the blog
Written about this part
Anchor chain & mooring
Kenter shackle: how to dismantle and assemble one, and why it is sealed with lead
The Kenter shackle joins lengths of anchor chain without changing the shape of the cable. Its parts, how to take one apart with a punch and hammer, how to put it back together and seal the taper pin with a new lead plug, which lead plug fits which chain size, and the checks before it goes back over the windlass.
4 min read
Anchor chain & mooring
Anchor chain wear limits: the 12% rule and when to renew a length
Anchor chain wears where links rub against each other and the windlass. Classification societies allow the mean diameter to fall 12% below nominal before a length must be renewed. The minimum diameter for every size from 12.5 to 162 mm, how to measure, and the other defects that condemn a length.
4 min read
Anchor chain & mooring
Arrangement of an anchor chain cable: lengths, links, Kenter shackles and the swivel forerunner
An anchor cable is not one chain but a string of 27.5 m lengths, joined by Kenter or D-type shackles, with a swivel forerunner at the anchor end and an end fastening in the chain locker. What each part is, how the common, enlarged and end links differ, and how the pieces are combined.
6 min read








