Ball-Joint Anchor Swivel

Ball-Joint Anchor Swivel, in 13 sizes. Indus part numbers.
Key features
- Product type: Ball-Joint Anchor Swivel
- Size range: 16 mm to 90 mm
Product description
Ball-joint swivel between anchor and chain, sized to the anchor mass.
Sizes
13 sizes, from 16 mm to 90 mm. Every size has its own Indus part number in the table below. The letters in the table match the dimension drawing.
Proof and breaking loads are as published for each size. They are test values, not working loads.
Dimensions are typical and can vary slightly between production runs; the drawing sent with the quotation is final.
Specifying
State the chain diameter and grade the fitting joins, and the certificate you need.
Ordering
Quote the Indus part number from the size table, or send the size and rating you need.
Identification
| Parameter | Value |
|---|---|
| Product type | Ball-Joint Anchor Swivel |
| Sizes | 13 |
Dimensions
| Parameter | Value |
|---|---|
| Size range | 16 mm to 90 mm |
Compliance
| Parameter | Value |
|---|---|
| Certification | Classification-society certificate (ABS, BV, DNV, LR and others) on request |
Shipping & lead time
Sizes & part numbers
13 sizes- Indus part no.IH-MR-AC-BJS-0160
- Size
- 16 mm
- Proof load (kN)
- 53
- A (mm)
- 37
- B (mm)
- 220
- C (mm)
- 25
- D (mm)
- 26
- E (mm)
- 20
- H (mm)
- 100
- L (mm)
- 35
- Weight (kg)
- 5
- For anchor
- 70–120 kg
- Indus part no.IH-MR-AC-BJS-0200
- Size
- 20 mm
- Proof load (kN)
- 89
- A (mm)
- 44
- B (mm)
- 270
- C (mm)
- 30
- D (mm)
- 30
- E (mm)
- 26
- H (mm)
- 125
- L (mm)
- 40
- Weight (kg)
- 9
- For anchor
- 121–250 kg
- Indus part no.IH-MR-AC-BJS-0260
- Size
- 26 mm
- Proof load (kN)
- 125
- A (mm)
- 60
- B (mm)
- 330
- C (mm)
- 35
- D (mm)
- 40
- E (mm)
- 32
- H (mm)
- 160
- L (mm)
- 55
- Weight (kg)
- 16
- For anchor
- 251–385 kg
- Indus part no.IH-MR-AC-BJS-0300
- Size
- 30 mm
- Proof load (kN)
- 175
- A (mm)
- 66
- B (mm)
- 370
- C (mm)
- 42
- D (mm)
- 45
- E (mm)
- 40
- H (mm)
- 180
- L (mm)
- 60
- Weight (kg)
- 25
- For anchor
- 386–630 kg
- Indus part no.IH-MR-AC-BJS-0330
- Size
- 33 mm
- Proof load (kN)
- 239
- A (mm)
- 74
- B (mm)
- 410
- C (mm)
- 50
- D (mm)
- 50
- E (mm)
- 42
- H (mm)
- 200
- L (mm)
- 70
- Weight (kg)
- 35
- For anchor
- 631–910 kg
- Indus part no.IH-MR-AC-BJS-0360
- Size
- 36 mm
- Proof load (kN)
- 335
- A (mm)
- 83
- B (mm)
- 470
- C (mm)
- 55
- D (mm)
- 60
- E (mm)
- 45
- H (mm)
- 210
- L (mm)
- 75
- Weight (kg)
- 43
- For anchor
- 911–1400 kg
- Indus part no.IH-MR-AC-BJS-0390
- Size
- 39 mm
- Proof load (kN)
- 438
- A (mm)
- 90
- B (mm)
- 540
- C (mm)
- 65
- D (mm)
- 70
- E (mm)
- 55
- H (mm)
- 240
- L (mm)
- 90
- Weight (kg)
- 60
- For anchor
- 1401–2000 kg
- Indus part no.IH-MR-AC-BJS-0450
- Size
- 45 mm
- Proof load (kN)
- 537
- A (mm)
- 100
- B (mm)
- 580
- C (mm)
- 75
- D (mm)
- 70
- E (mm)
- 60
- H (mm)
- 260
- L (mm)
- 100
- Weight (kg)
- 80
- For anchor
- 2001–2700 kg
Show all 13 sizesShow fewer sizes
- Indus part no.IH-MR-AC-BJS-0500
- Size
- 50 mm
- Proof load (kN)
- 638
- A (mm)
- 110
- B (mm)
- 615
- C (mm)
- 90
- D (mm)
- 80
- E (mm)
- 65
- H (mm)
- 290
- L (mm)
- 110
- Weight (kg)
- 100
- For anchor
- 2701–3500 kg
- Indus part no.IH-MR-AC-BJS-0600
- Size
- 60 mm
- Proof load (kN)
- 845
- A (mm)
- 140
- B (mm)
- 770
- C (mm)
- 115
- D (mm)
- 90
- E (mm)
- 80
- H (mm)
- 390
- L (mm)
- 150
- Weight (kg)
- 220
- For anchor
- 3501–5699 kg
- Indus part no.IH-MR-AC-BJS-0700
- Size
- 70 mm
- Proof load (kN)
- 987
- A (mm)
- 150
- B (mm)
- 925
- C (mm)
- 125
- D (mm)
- 100
- E (mm)
- 90
- H (mm)
- 440
- L (mm)
- 170
- Weight (kg)
- 375
- For anchor
- 5700–7199 kg
- Indus part no.IH-MR-AC-BJS-0800
- Size
- 80 mm
- Proof load (kN)
- 1,160
- A (mm)
- 210
- B (mm)
- 1,200
- C (mm)
- 140
- D (mm)
- 150
- E (mm)
- 110
- H (mm)
- 520
- L (mm)
- 210
- Weight (kg)
- 850
- For anchor
- 7200–9449 kg
- Indus part no.IH-MR-AC-BJS-0900
- Size
- 90 mm
- Proof load (kN)
- 1,260
- A (mm)
- 220
- B (mm)
- 1,340
- C (mm)
- 150
- D (mm)
- 160
- E (mm)
- 130
- H (mm)
- 630
- L (mm)
- 230
- Weight (kg)
- 1,100
- For anchor
- 9450–11250 kg
Size — Nominal size as the manufacturer states it. Proof load — Proof or test load the manufacturer applies to the part. A test figure — never a working limit. A — Dimension A on the manufacturer dimension drawing. B — Dimension B on the manufacturer dimension drawing. C — Dimension C on the manufacturer dimension drawing. D — Dimension D on the manufacturer dimension drawing. E — Dimension E on the manufacturer dimension drawing. H — Dimension H on the manufacturer dimension drawing. L — Dimension L on the manufacturer dimension drawing. Weight — Weight as the manufacturer publishes it. For anchor — Anchor mass the fitting is sized for, as published. Ask us for the dimension drawing if you need it stamped.
WLL is the most the part may carry in service. Proof and breaking loads are test figures — never lift to them. Each load is shown in the unit the manufacturer rates the part in, and a size ships with the manufacturer’s test certificate.
What is Ball-Joint Anchor Swivel used for?▾
How do I read an Indus part number for Ball-Joint Anchor Swivel, such as IH-MR-AC-BJS-0160?▾
What sizes does Ball-Joint Anchor Swivel come in?▾
How do I choose the right size of Ball-Joint Anchor Swivel?▾
What load rating does Ball-Joint Anchor Swivel have?▾
What material and finish is Ball-Joint Anchor Swivel supplied in?▾
What standard and certificate apply to Ball-Joint Anchor Swivel?▾
What does Ball-Joint Anchor Swivel connect to or work with?▾
How should Ball-Joint Anchor Swivel be inspected and looked after?▾
How does Ball-Joint Anchor Swivel differ from Bearing Mooring Swivel?▾
How are Ball-Joint Anchor Swivel shipped, and can they be exported from Dubai?▾
Do you keep Ball-Joint Anchor Swivel in stock in Dubai?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
From the blog
Written about this range
Anchor chain & mooring
Arrangement of an anchor chain cable: lengths, links, Kenter shackles and the swivel forerunner
An anchor cable is not one chain but a string of 27.5 m lengths, joined by Kenter or D-type shackles, with a swivel forerunner at the anchor end and an end fastening in the chain locker. What each part is, how the common, enlarged and end links differ, and how the pieces are combined.
6 min read
Anchor chain & mooring
Anchor chain testing: proof load, breaking load, mechanical tests and NDT
Before a length of anchor chain is certified it is proof loaded end to end, sampled for a break test, tested for strength and toughness, and — for offshore chain — examined link by link. What each test is, how samples are chosen, what counts as a pass, and the separate rules for shackles, swivels and links.
4 min read
Anchor chain & mooring
Kenter shackle: how to dismantle and assemble one, and why it is sealed with lead
The Kenter shackle joins lengths of anchor chain without changing the shape of the cable. Its parts, how to take one apart with a punch and hammer, how to put it back together and seal the taper pin with a new lead plug, which lead plug fits which chain size, and the checks before it goes back over the windlass.
4 min read








