Anchor Kenter Shackle — Grades R3 and R4

Anchor Kenter Shackle, in 2 sizes. Indus part numbers.
Key features
- Product type: Anchor Kenter Shackle
- Size range: 3″ (76 mm) to 3-5/16″ (84 mm)
Product description
Kenter-pattern anchor shackle in offshore grades R3 and R4 for 76 and 84 mm chain.
Sizes
2 sizes, from 3″ (76 mm) to 3-5/16″ (84 mm). Every size has its own Indus part number in the table below.
Proof and breaking loads are as published for each size. They are test values, not working loads.
Dimensions are typical and can vary slightly between production runs; the drawing sent with the quotation is final.
Specifying
State the chain diameter and grade the fitting joins, and the certificate you need.
Ordering
Quote the Indus part number from the size table, or send the size and rating you need.
Identification
| Parameter | Value |
|---|---|
| Product type | Anchor Kenter Shackle |
| Sizes | 2 |
Dimensions
| Parameter | Value |
|---|---|
| Size range | 3″ (76 mm) to 3-5/16″ (84 mm) |
Performance
| Parameter | Value |
|---|---|
| Minimum breaking load | 4,885–7,208 kN |
Compliance
| Parameter | Value |
|---|---|
| Certification | Classification-society certificate (ABS, BV, DNV, LR and others) on request |
Shipping & lead time
Sizes & part numbers
2 sizes- Indus part no.IH-MR-AC-AKS-0760
- Size
- 3″ (76 mm)
- Proof load, grade R3 (kN)
- 3,417
- Proof load, grade R4 (kN)
- 4,731
- Min breaking load, grade R3 (kN)
- 4,885
- Min breaking load, grade R4 (kN)
- 6,002
- Indus part no.IH-MR-AC-AKS-0840
- Size
- 3-5/16″ (84 mm)
- Proof load, grade R3 (kN)
- 4,104
- Proof load, grade R4 (kN)
- 5,682
- Min breaking load, grade R3 (kN)
- 5,866
- Min breaking load, grade R4 (kN)
- 7,208
Size — Nominal size as the manufacturer states it. Proof load, grade R3 — Proof or test load the manufacturer applies to the part. A test figure — never a working limit. Proof load, grade R4 — Proof or test load the manufacturer applies to the part. A test figure — never a working limit. Min breaking load, grade R3 — Minimum breaking load. A test figure — never lift to it. Min breaking load, grade R4 — Minimum breaking load. A test figure — never lift to it. Ask us for the dimension drawing if you need it stamped.
WLL is the most the part may carry in service. Proof and breaking loads are test figures — never lift to them. Each load is shown in the unit the manufacturer rates the part in, and a size ships with the manufacturer’s test certificate.
This range is published with a breaking load only, not a working load limit. Tell us the duty before using it to lift, and we will confirm a rating or recommend a rated part.
What is Anchor Kenter Shackle, Grades R3 and R4 used for?▾
What sizes does Anchor Kenter Shackle, Grades R3 and R4 come in?▾
How do I choose the right size of Anchor Kenter Shackle, Grades R3 and R4?▾
What load rating does Anchor Kenter Shackle, Grades R3 and R4 have?▾
Which chain grade is Anchor Kenter Shackle, Grades R3 and R4 made for?▾
What material and finish is Anchor Kenter Shackle, Grades R3 and R4 supplied in?▾
What standard and certificate apply to Anchor Kenter Shackle, Grades R3 and R4?▾
What does Anchor Kenter Shackle, Grades R3 and R4 connect to or work with?▾
How should Anchor Kenter Shackle, Grades R3 and R4 be inspected and looked after?▾
How does Anchor Kenter Shackle, Grades R3 and R4 differ from Kenter Shackle — Grades U2 and U3?▾
How are Anchor Kenter Shackle, Grades R3 and R4 shipped, and can they be exported from Dubai?▾
Do you keep Anchor Kenter Shackle, Grades R3 and R4 in stock in Dubai?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
From the blog
Written about this part
Anchor chain & mooring
Kenter shackle: how to dismantle and assemble one, and why it is sealed with lead
The Kenter shackle joins lengths of anchor chain without changing the shape of the cable. Its parts, how to take one apart with a punch and hammer, how to put it back together and seal the taper pin with a new lead plug, which lead plug fits which chain size, and the checks before it goes back over the windlass.
4 min read
Anchor chain & mooring
Offshore mooring chain grades ORQ, R3, R3S, R4, R4S and R5: strength, toughness and loads
The six offshore mooring chain grades compared: tensile and yield strength, elongation, reduction of area and Charpy impact energy for each, the IACS test-load constants, what 76 mm chain carries in every grade, and how the R grades differ from ship anchor chain grade U3.
4 min read








