Anchor Shackle, D Type — Grades U2 and U3

Anchor Shackle, D Type, in 56 sizes. Indus part numbers.
Key features
- Product type: Anchor Shackle, D Type
- Pattern / standard: IACS UR W18
- Size range: 1/2″ (12.5 mm) to 6-3/8″ (162 mm)
Product description
D-type anchor shackle that connects the anchor chain to the anchor shank.
Sizes
56 sizes, from 1/2″ (12.5 mm) to 6-3/8″ (162 mm). Every size has its own Indus part number in the table below.
Proof and breaking loads are those of the chain grade the fitting is made for, as IACS UR W18 requires of anchor chain accessories.
Dimensions are typical and can vary slightly between production runs; the drawing sent with the quotation is final.
Specifying
State the chain diameter and grade the fitting joins, and the certificate you need.
Ordering
Quote the Indus part number from the size table, or send the size and rating you need.
Identification
| Parameter | Value |
|---|---|
| Product type | Anchor Shackle, D Type |
| Pattern / standard | IACS UR W18 |
| Sizes | 56 |
Dimensions
| Parameter | Value |
|---|---|
| Size range | 1/2″ (12.5 mm) to 6-3/8″ (162 mm) |
Performance
| Parameter | Value |
|---|---|
| Minimum breaking load | 92–12,160 kN |
Compliance
| Parameter | Value |
|---|---|
| Certification | Classification-society certificate (ABS, BV, DNV, LR and others) on request |
Shipping & lead time
Sizes & part numbers
56 sizes- Indus part no.IH-MR-AC-ASD-0125
- Size
- 1/2″ (12.5 mm)
- Proof load, grade U2 (kN)
- 66
- Proof load, grade U3 (kN)
- —
- Min breaking load, grade U2 (kN)
- 92
- Min breaking load, grade U3 (kN)
- —
- Weight (kg)
- 1.1
- Indus part no.IH-MR-AC-ASD-0140
- Size
- 9/16″ (14 mm)
- Proof load, grade U2 (kN)
- 82
- Proof load, grade U3 (kN)
- —
- Min breaking load, grade U2 (kN)
- 116
- Min breaking load, grade U3 (kN)
- —
- Weight (kg)
- 1.3
- Indus part no.IH-MR-AC-ASD-0160
- Size
- 5/8″ (16 mm)
- Proof load, grade U2 (kN)
- 107
- Proof load, grade U3 (kN)
- —
- Min breaking load, grade U2 (kN)
- 150
- Min breaking load, grade U3 (kN)
- —
- Weight (kg)
- 1.6
- Indus part no.IH-MR-AC-ASD-0175
- Size
- 11/16″ (17.5 mm)
- Proof load, grade U2 (kN)
- 127
- Proof load, grade U3 (kN)
- —
- Min breaking load, grade U2 (kN)
- 179
- Min breaking load, grade U3 (kN)
- —
- Weight (kg)
- 2
- Indus part no.IH-MR-AC-ASD-0190
- Size
- 3/4″ (19 mm)
- Proof load, grade U2 (kN)
- 150
- Proof load, grade U3 (kN)
- —
- Min breaking load, grade U2 (kN)
- 211
- Min breaking load, grade U3 (kN)
- —
- Weight (kg)
- 2.5
- Indus part no.IH-MR-AC-ASD-0205
- Size
- 13/16″ (20.5 mm)
- Proof load, grade U2 (kN)
- 175
- Proof load, grade U3 (kN)
- 244
- Min breaking load, grade U2 (kN)
- 244
- Min breaking load, grade U3 (kN)
- 349
- Weight (kg)
- 3.3
- Indus part no.IH-MR-AC-ASD-0220
- Size
- 7/8″ (22 mm)
- Proof load, grade U2 (kN)
- 200
- Proof load, grade U3 (kN)
- 280
- Min breaking load, grade U2 (kN)
- 280
- Min breaking load, grade U3 (kN)
- 401
- Weight (kg)
- 4
- Indus part no.IH-MR-AC-ASD-0240
- Size
- 15/16″ (24 mm)
- Proof load, grade U2 (kN)
- 237
- Proof load, grade U3 (kN)
- 332
- Min breaking load, grade U2 (kN)
- 332
- Min breaking load, grade U3 (kN)
- 476
- Weight (kg)
- 5
Show all 56 sizesShow fewer sizes
Size — Nominal size as the manufacturer states it. Proof load, grade U2 — Proof or test load the manufacturer applies to the part. A test figure — never a working limit. Proof load, grade U3 — Proof or test load the manufacturer applies to the part. A test figure — never a working limit. Min breaking load, grade U2 — Minimum breaking load. A test figure — never lift to it. Min breaking load, grade U3 — Minimum breaking load. A test figure — never lift to it. Weight — Weight as the manufacturer publishes it. Ask us for the dimension drawing if you need it stamped.
WLL is the most the part may carry in service. Proof and breaking loads are test figures — never lift to them. Each load is shown in the unit the manufacturer rates the part in, and a size ships with the manufacturer’s test certificate.
This range is published with a breaking load only, not a working load limit. Tell us the duty before using it to lift, and we will confirm a rating or recommend a rated part.
What is Anchor Shackle, D Type, Grades U2 and U3 used for?▾
How do I read an Indus part number for Anchor Shackle, D Type, Grades U2 and U3, such as IH-MR-AC-ASD-0125?▾
What sizes does Anchor Shackle, D Type, Grades U2 and U3 come in?▾
How do I choose the right size of Anchor Shackle, D Type, Grades U2 and U3?▾
What load rating does Anchor Shackle, D Type, Grades U2 and U3 have?▾
What material and finish is Anchor Shackle, D Type, Grades U2 and U3 supplied in?▾
What standard and certificate apply to Anchor Shackle, D Type, Grades U2 and U3?▾
What does Anchor Shackle, D Type, Grades U2 and U3 connect to or work with?▾
How should Anchor Shackle, D Type, Grades U2 and U3 be inspected and looked after?▾
How does Anchor Shackle, D Type, Grades U2 and U3 differ from End Shackle, D Type — Grades U2 and U3?▾
How are Anchor Shackle, D Type, Grades U2 and U3 shipped, and can they be exported from Dubai?▾
Do you keep Anchor Shackle, D Type, Grades U2 and U3 in stock in Dubai?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
From the blog








