Groove KC Nipple

Groove KC Nipple — KC nipple with a grooved end for rigid grooved couplings. Sizes 1/2"–12". Carbon Steel, SS304, & SS316. Supplied by Sunpool (Taiwan); RFQ-only via Indus Hydraulics authorised distribution.
Key features
- Coupling Family: KC Nipple / Industrial Hose Fitting
- Coupling Type / Variant: KC Nipple & Hose Fitting — Groove KC Nipple
- End A Configuration: Serrated hose tail
- End B Configuration: Grooved end for a rigid grooved coupling
- Size Range: 1/2"-12"
- Coupling Family
- KC Nipple / Industrial Hose Fitting
- Coupling Type / Variant
- KC Nipple & Hose Fitting — Groove KC Nipple
- End A Configuration
- Serrated hose tail
- End B Configuration
- Grooved end for a rigid grooved coupling
- Size Range
- 1/2"-12"
Product description
The Groove KC Nipple is a KC Nipple / Industrial Hose Fitting from the Sunpool (Taiwan) industrial coupling range. Indus Hydraulics is an authorised distributor in the UAE.
Configuration
- Coupling family: KC Nipple / Industrial Hose Fitting
- Coupling type: KC Nipple & Hose Fitting — Groove KC Nipple
- End A: Serrated hose tail
- End B: Grooved end for a rigid grooved coupling
Specifications
- Size range: 1/2"–12"
- Material: Carbon Steel, SS304, & SS316
- Working pressure: Not published by Sunpool. Give us your working pressure and medium and we will check it with the manufacturer.
Manufacturer notes
- High quality carbon steel provides durable life.
- Extra fine machining serrated tail.
- Great plated, low toxic & environment friendly..
- Groove is compatble with rigid coupling like Victaulic.
About the family
KC (king combination) nipples are hose tails: a serrated shank that goes inside the hose, and a threaded, grooved or flanged end that connects to pipe or another fitting. The hose is held on the tail by a clamp, ferrule or sleeve, and that is what sets how much pressure the joint holds. Sunpool makes standard KC nipples from 1/2" to 12" in plated carbon steel, SS304 and SS316; heavy-duty versions with a thicker wall and a longer tail for crimping with a ferrule, with or without a welded #150 flange; grooved nipples for rigid grooved couplings; and hose menders. The same shelf carries large-bore fittings for agricultural drag hose and frac-water lines, a Figure 206 hammer-union hose coupling and suction hose couplings.
Selection and service notes
The clamp, ferrule or sleeve over the hose usually limits the assembly, not the nipple: rate the joint at its weakest part. Sunpool rates its heavy-duty KC nipples and flanges at 300 psi and publishes no rating for the rest. Specify the end thread and give the hose outside diameter for the ferrule or sleeve.
How to order
Specify the size, the body material where more than one is listed, and any thread, tail or gasket variant on the RFQ. Indus engineering will confirm the manufacturer part number against your application.
Further reading: KC nipples, shank couplings and hose menders.
Identification
| Parameter | Value |
|---|---|
| Coupling Family | KC Nipple / Industrial Hose Fitting |
| Coupling Type / Variant | KC Nipple & Hose Fitting — Groove KC Nipple |
Configuration
| Parameter | Value |
|---|---|
| End A Configuration | Serrated hose tail |
| End B Configuration | Grooved end for a rigid grooved coupling |
Dimensions
| Parameter | Value |
|---|---|
| Size Range | 1/2"-12" |
Construction
| Parameter | Value |
|---|---|
| Materials Available | Carbon Steel, SS304, & SS316 |
Notes
| Parameter | Value |
|---|---|
| Notes | High quality carbon steel provides durable life. Extra fine machining serrated tail. Great plated, low toxic & environment friendly.. Groove is compatble with rigid coupling like Victaulic. |
Shipping & lead time
What is the groove KC nipple used for?▾
How do I specify the groove KC nipple?▾
What sizes does the groove KC nipple come in?▾
What working pressure does the groove KC nipple have?▾
What is the groove KC nipple made of?▾
Does Indus supply test certificates with the groove KC nipple?▾
What does the groove KC nipple connect to?▾
How do I fit the groove KC nipple to a hose?▾
Where is the groove KC nipple typically used?▾
How does the groove KC nipple differ from the KC nipple?▾
Where is the groove KC nipple made, and is it stocked?▾
Is the groove KC nipple in stock in Dubai?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
The same part, in the designations used across European and Gulf trade catalogues.
- de
- KC-Kupplung Nippel
- fr
- raccord KC mamelon
- es
- acoplamiento KC niple
- it
- raccordo KC nipplo
From the blog
Written about this range
Industrial hose
KC nipples and shank couplings: the plain hose end, and how to make it hold
A serrated tail, a thread or a flange, and a clamp: KC nipples, shank couplings, pin-lug couplings and menders are the simplest hose ends there are. Which one to use, and the clamp that decides the rating.
5 min read
Industrial hose
Flanged hose connections: ASME B16.5 flange types, classes and faces on industrial hose
Where a hose meets fixed pipework, it usually meets a flange. The flange types we stock, what Class 150 and 300 mean, RF against FF against RTJ, and the stub-end trick that lets the bolt holes line up.
5 min read
Industrial hose
How to repair lay flat hose: cutting out, re-coupling and menders
A cut, a burst fold or a crushed coupling does not have to mean a new hose. Most lay flat damage is repaired by cutting out the bad section and re-coupling, or — on low-pressure lines — joining the ends with a mender. When to repair and when to scrap, how to make each repair properly, and the extra rules that apply to fire hose.
4 min read








