Heavy Duty KC X Turnback Flange

Heavy Duty KC X Turnback Flange — heavy-duty KC hose tail with a welded disc for a #150 floating flange, rated 300 psi. Sizes 2"–12". Carbon Steel, SS304, & SS316. Supplied by Sunpool (Taiwan); RFQ-only via Indus Hydraulics authorised distribution.
Key features
- Coupling Family: KC Nipple / Industrial Hose Fitting
- Coupling Type / Variant: KC Nipple & Hose Fitting — KC X Turnback Flange
- End A Configuration: Thick-walled hose tail
- End B Configuration: Welded disc for a #150 floating flange
- Size Range: 2"–12"
- Working Pressure: 300 PSI
- Coupling Family
- KC Nipple / Industrial Hose Fitting
- Coupling Type / Variant
- KC Nipple & Hose Fitting — KC X Turnback Flange
- End A Configuration
- Thick-walled hose tail
- End B Configuration
- Welded disc for a #150 floating flange
- Size Range
- 2"–12"
- Working Pressure
- 300 PSI
Product description
The Heavy Duty KC X Turnback Flange is a KC Nipple / Industrial Hose Fitting from the Sunpool (Taiwan) industrial coupling range. Indus Hydraulics is an authorised distributor in the UAE.
Configuration
- Coupling family: KC Nipple / Industrial Hose Fitting
- Coupling type: KC Nipple & Hose Fitting — KC X Turnback Flange
- End A: Thick-walled hose tail
- End B: Welded disc for a #150 floating flange
Specifications
- Size range: 2"–12"
- Material: Carbon Steel, SS304, & SS316
- Working pressure: 300 PSI
Manufacturer notes
- Thicker wall (SCH40) & longer tail.
- Excellent welded disc compatible with #150 floating flange.
- Great plated, low toxic & environment friendly.
- Working pressure up to 300 PSI.
About the family
KC (king combination) nipples are hose tails: a serrated shank that goes inside the hose, and a threaded, grooved or flanged end that connects to pipe or another fitting. The hose is held on the tail by a clamp, ferrule or sleeve, and that is what sets how much pressure the joint holds. Sunpool makes standard KC nipples from 1/2" to 12" in plated carbon steel, SS304 and SS316; heavy-duty versions with a thicker wall and a longer tail for crimping with a ferrule, with or without a welded #150 flange; grooved nipples for rigid grooved couplings; and hose menders. The same shelf carries large-bore fittings for agricultural drag hose and frac-water lines, a Figure 206 hammer-union hose coupling and suction hose couplings.
Selection and service notes
The clamp, ferrule or sleeve over the hose usually limits the assembly, not the nipple: rate the joint at its weakest part. Sunpool rates its heavy-duty KC nipples and flanges at 300 psi and publishes no rating for the rest. Specify the end thread and give the hose outside diameter for the ferrule or sleeve.
How to order
Specify the size, the body material where more than one is listed, and any thread, tail or gasket variant on the RFQ. Indus engineering will confirm the manufacturer part number against your application.
Further reading: KC nipples, shank couplings and hose menders.
Sunpool sizes
Order by the Indus part number in the size table or by the Sunpool part number for the material you need. O.D. and wall thickness are Sunpool’s, for the nipple body.
| Size | O.D. (mm) | Wall thickness (mm) | Sunpool part no., carbon steel (plated) | SS304 | SS316 |
|---|---|---|---|---|---|
| 2" | 60.3 | 4 | KC-CS-200H-TB | KC-S4-200H-TB | KC-S6-200H-TB |
| 2-1/2" | 73 | 5.1 | KC-CS-250H-TB | KC-S4-250H-TB | KC-S6-250H-TB |
| 3" | 89 | 5.2–5.5 | KC-CS-300H-TB | KC-S4-300H-TB | KC-S6-300H-TB |
| 4" | 114.3 | 5.5 | KC-CS-400H-TB | KC-S4-400H-TB | KC-S6-400H-TB |
| 5" | 140 | 6 | KC-CS-500H-TB | KC-S4-500H-TB | KC-S6-500H-TB |
| 6" | 168 | 6 | KC-CS-600H-TB | KC-S4-600H-TB | KC-S6-600H-TB |
| 8" | 219 | 8.18 | KC-CS-800H-TB | KC-S4-800H-TB | KC-S6-800H-TB |
| 10" | 273 | 8.8 | KC-CS-1KH-TB | KC-S4-1KH-TB | KC-S6-1KH-TB |
| 12" | 323 | 9.2 | KC-CS-1K2H-TB | KC-S4-1K2H-TB | KC-S6-1K2H-TB |
Sizes, dimensions and part numbers from Sunpool’s catalogue page for this part and its KC part-number list, checked 7 October 2026.
Identification
| Parameter | Value |
|---|---|
| Coupling Family | KC Nipple / Industrial Hose Fitting |
| Coupling Type / Variant | KC Nipple & Hose Fitting — KC X Turnback Flange |
Configuration
| Parameter | Value |
|---|---|
| End A Configuration | Thick-walled hose tail |
| End B Configuration | Welded disc for a #150 floating flange |
Dimensions
| Parameter | Value |
|---|---|
| Size Range | 2"–12" |
Construction
| Parameter | Value |
|---|---|
| Materials Available | Carbon Steel, SS304, & SS316 |
Performance
| Parameter | Value |
|---|---|
| Working Pressure | 300 PSI |
Notes
| Parameter | Value |
|---|---|
| Notes | Thicker wall (SCH40) & longer tail. Excellent welded disc compatible with #150 floating flange. Great plated, low toxic & environment friendly. Working pressure up to 300 PSI. |
Shipping & lead time
Sizes & part numbers
9 sizes- Indus part no.IH-KC-KC-X-TURNBACK-FLANGE-200
- Nominal size
- 2"
- Indus part no.IH-KC-KC-X-TURNBACK-FLANGE-250
- Nominal size
- 2-1/2"
- Indus part no.IH-KC-KC-X-TURNBACK-FLANGE-300
- Nominal size
- 3"
- Indus part no.IH-KC-KC-X-TURNBACK-FLANGE-400
- Nominal size
- 4"
- Indus part no.IH-KC-KC-X-TURNBACK-FLANGE-500
- Nominal size
- 5"
- Indus part no.IH-KC-KC-X-TURNBACK-FLANGE-600
- Nominal size
- 6"
- Indus part no.IH-KC-KC-X-TURNBACK-FLANGE-800
- Nominal size
- 8"
- Indus part no.IH-KC-KC-X-TURNBACK-FLANGE-1000
- Nominal size
- 10"
Show all 9 sizesShow fewer sizes
- Indus part no.IH-KC-KC-X-TURNBACK-FLANGE-1200
- Nominal size
- 12"
What is the heavy duty KC x turnback flange used for?▾
How do I read the heavy duty KC x turnback flange part numbers?▾
What sizes does the heavy duty KC x turnback flange come in?▾
What working pressure does the heavy duty KC x turnback flange have?▾
What is the heavy duty KC x turnback flange made of?▾
Does Indus supply test certificates with the heavy duty KC x turnback flange?▾
What does the heavy duty KC x turnback flange connect to?▾
How do I fit the heavy duty KC x turnback flange to a hose?▾
Where is the heavy duty KC x turnback flange typically used?▾
How does the heavy duty KC x turnback flange differ from the heavy duty KC x fixed flange?▾
Where is the heavy duty KC x turnback flange made, and is it stocked?▾
Is the heavy duty KC x turnback flange in stock in Dubai?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
The same part, in the designations used across European and Gulf trade catalogues.
- de
- KC-Kupplung Flansch
- fr
- raccord KC bride
- es
- acoplamiento KC brida
- it
- raccordo KC flangia
From the blog
Written about this range
Industrial hose
KC nipples and shank couplings: the plain hose end, and how to make it hold
A serrated tail, a thread or a flange, and a clamp: KC nipples, shank couplings, pin-lug couplings and menders are the simplest hose ends there are. Which one to use, and the clamp that decides the rating.
5 min read
Industrial hose
Flanged hose connections: ASME B16.5 flange types, classes and faces on industrial hose
Where a hose meets fixed pipework, it usually meets a flange. The flange types we stock, what Class 150 and 300 mean, RF against FF against RTJ, and the stub-end trick that lets the bolt holes line up.
5 min read
Industrial hose
How to repair lay flat hose: cutting out, re-coupling and menders
A cut, a burst fold or a crushed coupling does not have to mean a new hose. Most lay flat damage is repaired by cutting out the bad section and re-coupling, or — on low-pressure lines — joining the ends with a mender. When to repair and when to scrap, how to make each repair properly, and the extra rules that apply to fire hose.
4 min read








