Skip to content
SUNPOOLIH-KC-SUCTION-HOSE· MADE IN TAIWAN

Carbon Steel Suction Hose Coupling

KC Nipple & Hose FittingsEx-stock · delivery in 3 days
Carbon steel suction hose coupling with rocker lugs and hose tails
VIEW 01·Carbon steel suction hose coupling with rocker lugs and hose tails

Carbon Steel Suction Hose Coupling — suction hose coupling in plated carbon steel, threaded NPT, BSP or NPSM. Sizes 1-1/2"–4". Carbon Steel Plated. Supplied by Sunpool (Taiwan); RFQ-only via Indus Hydraulics authorised distribution.

Key features

  • Coupling Family: KC Nipple / Industrial Hose Fitting
  • Coupling Type / Variant: KC Nipple & Hose Fitting — Suction Hose Coupling
  • End A Configuration: Hose shank
  • End B Configuration: Threaded end — NPT, BSP or NPSM
  • Size Range: 1-1/2"-4"
Coupling Family
KC Nipple / Industrial Hose Fitting
Coupling Type / Variant
KC Nipple & Hose Fitting — Suction Hose Coupling
End A Configuration
Hose shank
End B Configuration
Threaded end — NPT, BSP or NPSM
Size Range
1-1/2"-4"
Ships in 24h
Order before 14:00 GST · Jebel Ali
24-month warranty
Manufacturer-backed · genuine parts
Engineering support
A real applications engineer

Product description

The Carbon Steel Suction Hose Coupling is a KC Nipple / Industrial Hose Fitting from the Sunpool (Taiwan) industrial coupling range. Indus Hydraulics is an authorised distributor in the UAE.

Configuration

  • Coupling family: KC Nipple / Industrial Hose Fitting
  • Coupling type: KC Nipple & Hose Fitting — Suction Hose Coupling
  • End A: Hose shank
  • End B: Threaded end — NPT, BSP or NPSM

Specifications

  • Size range: 1-1/2"–4"
  • Material: Carbon Steel Plated
  • Working pressure: Not published by Sunpool. Give us your working pressure and medium and we will check it with the manufacturer.

About the family

KC (king combination) nipples are hose tails: a serrated shank that goes inside the hose, and a threaded, grooved or flanged end that connects to pipe or another fitting. The hose is held on the tail by a clamp, ferrule or sleeve, and that is what sets how much pressure the joint holds. Sunpool makes standard KC nipples from 1/2" to 12" in plated carbon steel, SS304 and SS316; heavy-duty versions with a thicker wall and a longer tail for crimping with a ferrule, with or without a welded #150 flange; grooved nipples for rigid grooved couplings; and hose menders. The same shelf carries large-bore fittings for agricultural drag hose and frac-water lines, a Figure 206 hammer-union hose coupling and suction hose couplings.

Selection and service notes

The clamp, ferrule or sleeve over the hose usually limits the assembly, not the nipple: rate the joint at its weakest part. Sunpool rates its heavy-duty KC nipples and flanges at 300 psi and publishes no rating for the rest. Specify the end thread and give the hose outside diameter for the ferrule or sleeve.

How to order

Specify the size, the body material where more than one is listed, and any thread, tail or gasket variant on the RFQ. Indus engineering will confirm the manufacturer part number against your application.

Further reading: KC nipples, shank couplings and hose menders.

Identification

ParameterValue
Coupling FamilyKC Nipple / Industrial Hose Fitting
Coupling Type / VariantKC Nipple & Hose Fitting — Suction Hose Coupling

Configuration

ParameterValue
End A ConfigurationHose shank
End B ConfigurationThreaded end — NPT, BSP or NPSM
Thread FormNPT, BSP, or NPSM

Dimensions

ParameterValue
Size Range1-1/2"-4"

Construction

ParameterValue
Materials AvailableCarbon Steel Plated

Shipping & lead time

Lead TimeEx-stock from Dubai — delivered within 3 working days in the UAE. Export orders ship on the lane stated for the destination.
OriginMade in Taiwan

Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations

Also known as

The same part, in the designations used across European and Gulf trade catalogues.

de
KC-Kupplung
fr
raccord KC
es
acoplamiento KC
it
raccordo KC

From the blog

Written about this part

RELATED · OFTEN PAIRED WITH

Engineers viewing this also looked at