Heavy Duty KC Nipple

Heavy Duty KC Nipple — heavy-duty KC nipple with a thicker wall and a grooved tail for crimping a ferrule, rated 300 psi. Sizes 2"–12". Carbon Steel, SS304, & SS316. Supplied by Sunpool (Taiwan); RFQ-only via Indus Hydraulics authorised distribution.
Key features
- Coupling Family: KC Nipple / Industrial Hose Fitting
- Coupling Type / Variant: KC Nipple & Hose Fitting — KC Nipple
- End A Configuration: Serrated hose tail with a machined groove for crimping a ferrule
- End B Configuration: Male thread — NPT or BSPT; unthreaded to order
- Size Range: 2"–12"
- Working Pressure: 300 PSI
- Coupling Family
- KC Nipple / Industrial Hose Fitting
- Coupling Type / Variant
- KC Nipple & Hose Fitting — KC Nipple
- End A Configuration
- Serrated hose tail with a machined groove for crimping a ferrule
- End B Configuration
- Male thread — NPT or BSPT; unthreaded to order
- Size Range
- 2"–12"
- Working Pressure
- 300 PSI
Product description
The Heavy Duty KC Nipple is a KC Nipple / Industrial Hose Fitting from the Sunpool (Taiwan) industrial coupling range. Indus Hydraulics is an authorised distributor in the UAE.
Configuration
- Coupling family: KC Nipple / Industrial Hose Fitting
- Coupling type: KC Nipple & Hose Fitting — KC Nipple
- End A: Serrated hose tail with a machined groove for crimping a ferrule
- End B: Male thread — NPT or BSPT; unthreaded to order
Specifications
- Size range: 2"–12"
- Material: Carbon Steel, SS304, & SS316
- Working pressure: 300 PSI
Manufacturer notes
- Thicker wall (SCH40) & longer tail.
- Great plated, low toxic & environment friendly.
- Machined goove for crimping ferrule.
- Working pressure up to 300 PSI.
- Non Thread Type is also available.
About the family
KC (king combination) nipples are hose tails: a serrated shank that goes inside the hose, and a threaded, grooved or flanged end that connects to pipe or another fitting. The hose is held on the tail by a clamp, ferrule or sleeve, and that is what sets how much pressure the joint holds. Sunpool makes standard KC nipples from 1/2" to 12" in plated carbon steel, SS304 and SS316; heavy-duty versions with a thicker wall and a longer tail for crimping with a ferrule, with or without a welded #150 flange; grooved nipples for rigid grooved couplings; and hose menders. The same shelf carries large-bore fittings for agricultural drag hose and frac-water lines, a Figure 206 hammer-union hose coupling and suction hose couplings.
Selection and service notes
The clamp, ferrule or sleeve over the hose usually limits the assembly, not the nipple: rate the joint at its weakest part. Sunpool rates its heavy-duty KC nipples and flanges at 300 psi and publishes no rating for the rest. Specify the end thread and give the hose outside diameter for the ferrule or sleeve.
How to order
Specify the size, the body material where more than one is listed, and any thread, tail or gasket variant on the RFQ. Indus engineering will confirm the manufacturer part number against your application.
Further reading: KC nipples, shank couplings and hose menders.
Sunpool sizes
Order by the Indus part number in the size table or by the Sunpool part number for the material you need. Sunpool part numbers ending -N are NPT; Sunpool changes the ending to -P for BSP, -T for BSPT and -NT for an unthreaded nipple. O.D. and wall thickness are Sunpool’s, for the nipple body.
| Size | O.D. (mm) | Wall thickness (mm) | Sunpool part no., carbon steel (plated) | SS304 | SS316 |
|---|---|---|---|---|---|
| 2" | 60.3 | 4 | KC-CS-200H-N | KC-S4-200H-N | KC-S6-200H-N |
| 2-1/2" | 73 | 5.1 | KC-CS-250H-N | KC-S4-250H-N | KC-S6-250H-N |
| 3" | 89 | 5.2–5.5 | KC-CS-300H-N | KC-S4-300H-N | KC-S6-300H-N |
| 4" | 114.3 | 5.5 | KC-CS-400H-N | KC-S4-400H-N | KC-S6-400H-N |
| 5" | 140 | 6 | KC-CS-500H-N | KC-S4-500H-N | KC-S6-500H-N |
| 6" | 168 | 6 | KC-CS-600H-N | KC-S4-600H-N | KC-S6-600H-N |
| 8" | 219 | 8.18 | KC-CS-800H-N | KC-S4-800H-N | KC-S6-800H-N |
| 10" | 273 | 8.8 | KC-CS-1KH-N | KC-S4-1KH-N | KC-S6-1KH-N |
| 12" | 323 | 9.2 | KC-CS-1K2H-N | KC-S4-1K2H-N | KC-S6-1K2H-N |
Sizes, dimensions and part numbers from Sunpool’s catalogue page for this part and its KC part-number list, checked 7 October 2026.
Identification
| Parameter | Value |
|---|---|
| Coupling Family | KC Nipple / Industrial Hose Fitting |
| Coupling Type / Variant | KC Nipple & Hose Fitting — KC Nipple |
Configuration
| Parameter | Value |
|---|---|
| End A Configuration | Serrated hose tail with a machined groove for crimping a ferrule |
| End B Configuration | Male thread — NPT or BSPT; unthreaded to order |
| Thread Form | NPT or BSPT |
Dimensions
| Parameter | Value |
|---|---|
| Size Range | 2"–12" |
Construction
| Parameter | Value |
|---|---|
| Materials Available | Carbon Steel, SS304, & SS316 |
Performance
| Parameter | Value |
|---|---|
| Working Pressure | 300 PSI |
Notes
| Parameter | Value |
|---|---|
| Notes | Thicker wall (SCH40) & longer tail. Great plated, low toxic & environment friendly. Machined goove for crimping ferrule. Working pressure up to 300 PSI. Non Thread Type is also available. |
Shipping & lead time
Sizes & part numbers
9 sizes- Indus part no.IH-KC-KC-NIPPLE-200
- Nominal size
- 2"
- Indus part no.IH-KC-KC-NIPPLE-250
- Nominal size
- 2-1/2"
- Indus part no.IH-KC-KC-NIPPLE-300
- Nominal size
- 3"
- Indus part no.IH-KC-KC-NIPPLE-400
- Nominal size
- 4"
- Indus part no.IH-KC-KC-NIPPLE-500
- Nominal size
- 5"
- Indus part no.IH-KC-KC-NIPPLE-600
- Nominal size
- 6"
- Indus part no.IH-KC-KC-NIPPLE-800
- Nominal size
- 8"
- Indus part no.IH-KC-KC-NIPPLE-1000
- Nominal size
- 10"
Show all 9 sizesShow fewer sizes
- Indus part no.IH-KC-KC-NIPPLE-1200
- Nominal size
- 12"
What is the heavy duty KC nipple used for?▾
How do I read the heavy duty KC nipple part numbers?▾
What sizes does the heavy duty KC nipple come in?▾
What working pressure does the heavy duty KC nipple have?▾
What is the heavy duty KC nipple made of?▾
Does Indus supply test certificates with the heavy duty KC nipple?▾
What does the heavy duty KC nipple connect to?▾
How do I fit the heavy duty KC nipple to a hose?▾
Where is the heavy duty KC nipple typically used?▾
How does the heavy duty KC nipple differ from the KC nipple?▾
Where is the heavy duty KC nipple made, and is it stocked?▾
Is the heavy duty KC nipple in stock in Dubai?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
The same part, in the designations used across European and Gulf trade catalogues.
- de
- KC-Kupplung Nippel
- fr
- raccord KC mamelon
- es
- acoplamiento KC niple
- it
- raccordo KC nipplo
From the blog
Written about this part
Industrial hose
KC nipples and shank couplings: the plain hose end, and how to make it hold
A serrated tail, a thread or a flange, and a clamp: KC nipples, shank couplings, pin-lug couplings and menders are the simplest hose ends there are. Which one to use, and the clamp that decides the rating.
5 min read
Industrial hose
Industrial hose couplings: how to identify and choose every common family
Cam and groove, Storz, Bauer, Guillemin, GOST, claw, ground joint, EN 14420, KC and flanges. How to tell them apart in thirty seconds, which duty each one suits, and how the coupling sets the rating.
7 min read








