Double Clevis Link — 5.3 t WLL

Double Clevis Link, in 6 sizes, 1/4″ to 13 mm, WLL 5.3 t. Indus part numbers, manufacturer's test certificate.
Key features
- Product type: Double Clevis Link
- Size range: 1/4″ to 13 mm
- Working load limit: 5.3 t
- Size range
- 1/4″ to 13 mm
- Working load limit
- 5.3 t
Product description
Master links, rings and swivels gather sling legs onto a crane hook, join chain and stop rigging twisting.
Sizes and ratings
6 sizes, 1/4″ to 13 mm. Working load limit 5.3 t. Minimum breaking load 21.2 t. Every size has its own Indus part number in the table below, with the loads in the unit the manufacturer rates them in.
Manufacturer's data
- Minimum ultimate load is 4 times the working load limit (a 4:1 design factor).
Choosing a size
A master link must take every leg of the sling at once and fit the crane hook without binding. Swivels let the rigging untwist but are not rotating bearings under full load.
Ordering
Quote the Indus part number from the size table, or send the size and working load you need. Each consignment ships with the manufacturer's test certificate; say on the RFQ if your site needs anything more.
Identification
| Parameter | Value |
|---|---|
| Product type | Double Clevis Link |
| Sizes | 6 |
Dimensions
| Parameter | Value |
|---|---|
| Size range | 1/4″ to 13 mm |
Performance
| Parameter | Value |
|---|---|
| Working load limit | 5.3 t |
| Minimum breaking load | 21.2 t |
Compliance
| Parameter | Value |
|---|---|
| Certification | Manufacturer's test certificate |
Shipping & lead time
Sizes & part numbers
6 sizes- Indus part no.IH-LR-RL-DCL-025
- Size
- 1/4″
- Type
- Standard
- WLL (t)
- —
- WLL (lbs)
- 2,600
- Min breaking load (t)
- —
- A (mm)
- 12.7
- B (mm)
- 19
- C (mm)
- 12.7
- D (mm)
- 7.9
- E (mm)
- 9.7
- F (mm)
- 19
- R (mm)
- 38.1
- Weight (kg)
- —
- Weight (lbs)
- 0.44
- Indus part no.IH-LR-RL-DCL-031-038
- Size
- 5/16″- 3/8″
- Type
- Standard
- WLL (t)
- —
- WLL (lbs)
- 5,400
- Min breaking load (t)
- —
- A (mm)
- 14.2
- B (mm)
- 25.4
- C (mm)
- 16
- D (mm)
- 11.2
- E (mm)
- 11.9
- F (mm)
- 25.4
- R (mm)
- 46
- Weight (kg)
- —
- Weight (lbs)
- 0.81
- Indus part no.IH-LR-RL-DCL-044
- Size
- 7/16″
- Type
- Standard
- WLL (t)
- —
- WLL (lbs)
- 7,000
- Min breaking load (t)
- —
- A (mm)
- 17.5
- B (mm)
- 28.7
- C (mm)
- 17.5
- D (mm)
- 14.2
- E (mm)
- 15
- F (mm)
- 27.7
- R (mm)
- 55.6
- Weight (kg)
- —
- Weight (lbs)
- 1.28
- Indus part no.IH-LR-RL-DCL-050
- Size
- 1/2″
- Type
- Standard
- WLL (t)
- —
- WLL (lbs)
- 9,200
- Min breaking load (t)
- —
- A (mm)
- 20.6
- B (mm)
- 31.8
- C (mm)
- 19
- D (mm)
- 16
- E (mm)
- 16.8
- F (mm)
- 31.8
- R (mm)
- 62.7
- Weight (kg)
- —
- Weight (lbs)
- 1.68
- Indus part no.IH-LR-RL-DCL-062
- Size
- 5/8″
- Type
- Standard
- WLL (t)
- —
- WLL (lbs)
- 17,500
- Min breaking load (t)
- —
- A (mm)
- 19.8
- B (mm)
- 41.4
- C (mm)
- 25.4
- D (mm)
- 19
- E (mm)
- 21.1
- F (mm)
- 38.4
- R (mm)
- 77
- Weight (kg)
- —
- Weight (lbs)
- 2.91
- Indus part no.IH-LR-RL-DCL-13MM-ST
- Size
- 13 mm
- Type
- Special type
- WLL (t)
- 5.3
- WLL (lbs)
- —
- Min breaking load (t)
- 21.2
- A (mm)
- —
- B (mm)
- —
- C (mm)
- —
- D (mm)
- —
- E (mm)
- —
- F (mm)
- —
- R (mm)
- —
- Weight (kg)
- 1.2
- Weight (lbs)
- —
Size — Nominal size as the manufacturer states it. Type — Manufacturer type within the size. WLL — Working load limit — the most the part may carry in service, as the manufacturer rates it. WLL — Working load limit — the most the part may carry in service, as the manufacturer rates it. Min breaking load — Minimum breaking load. A test figure — never lift to it. A — Dimension A on the manufacturer dimension drawing. B — Dimension B on the manufacturer dimension drawing. C — Dimension C on the manufacturer dimension drawing. D — Dimension D on the manufacturer dimension drawing. E — Dimension E on the manufacturer dimension drawing. F — Dimension F on the manufacturer dimension drawing. R — Dimension R on the manufacturer dimension drawing. Weight — Weight as the manufacturer publishes it. Weight — Weight as the manufacturer publishes it. Ask us for the dimension drawing if you need it stamped.
WLL is the most the part may carry in service. Proof and breaking loads are test figures — never lift to them. Each load is shown in the unit the manufacturer rates the part in, and a size ships with the manufacturer’s test certificate.
What is the double clevis link and what sizes does it come in?▾
How do I read the Indus part number on the double clevis link?▾
Which sizes of the double clevis link are listed, and what do they weigh?▾
How do I choose the right size of double clevis link?▾
What working load limit does the double clevis link have?▾
What is the double clevis link made of, and how is it finished?▾
Which standard or certificate applies to the double clevis link?▾
What does the double clevis link connect to?▾
How should the double clevis link be inspected before use?▾
Where is the double clevis link used?▾
double clevis link compared with the twin clevis link?▾
Do you stock the double clevis link, and how do I order?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
From the blog
Written about this range
Lifting & rigging
Lifting swivels explained: positioning swivels, bearing swivels and swivel hooks
A swivel stops rigging twisting, but most swivels are not designed to turn while they carry the load. Regular eye and jaw swivels, bearing swivels that are built to rotate under load, swivel hooks of both kinds, and why a swivel is chosen by its rating, not by the size stamped on it.
3 min read
Lifting & rigging
Snap hooks and quick links: ratings, gates and where not to use them
A 10 mm quick link on our listings is rated 2,640 lbs; a 10 mm Grade 80 chain sling leg, 3.15 tonnes. How quick links and snap hooks are rated, why the gate decides their strength, and why they are not overhead lifting hardware.
6 min read
Lifting & rigging
Master links explained: single links, assemblies with sub-links, and sizing to the hook
The master link is the top of a multi-leg sling: it gathers the legs and sits in the crane hook. Two legs can share a single master link; three or four need an assembly with sub-links. And the link has to fit the hook as well as the chain. Here is how to choose one.
5 min read








