Skip to content
DINAMIC OILIH-DO-WDD

Dinamic Oil WDD Motorized Winch Drums — 7,500 to 30,000 daN Line Pull

Winch Drives & Motor DrumsEx-stock · delivery in 3 days
Dinamic Oil motorized winch drum with planetary drive inside a grooved red drum, deck-crane build
VIEW 01·Dinamic Oil motorized winch drum with planetary drive inside a grooved red drum, deck-crane build
1 / 3

Dinamic Oil WDD motor drums: WD planetary drive, drum and outboard support in one unit, 7,500 to 30,000 daN line pull, built in Italy. From Indus Hydraulics, authorised Dinamic Oil distributor, UAE.

Key features

  • Product type: Motorized winch drum
  • Series: Dinamic Oil WDD
  • Execution: Drum with built-in rotating-case planetary drive
  • Line pull, 1st layer: 7,500 to 30,000 daN
  • Rope diameter: 18 to 32 mm (suggested)
  • Motor / input: Hydraulic motor (SAE flange), electric on request
  • Brake: Negative multi-disc (WD drive)
  • Type approval: WD drive: DNV TAS00000YS; drum per project
Product type
Motorized winch drum
Series
Dinamic Oil WDD
Execution
Drum with built-in rotating-case planetary drive
Type approval
WD drive: DNV TAS00000YS; drum per project
DATA
Dinamic Oil Planetary Winch Drives catalogue (WD, RW, WDD)
datasheet · EN
↓ Download
Ships in 24h
Order before 14:00 GST · Jebel Ali
24-month warranty
Manufacturer-backed · genuine parts
Engineering support
A real applications engineer

Product description

A WDD motor drum is a WD planetary winch drive already built into its drum, with the outboard support on the other end: the winch builder only designs the frame and adds the motor. Seven sizes, WDD A75 to WDD G300, give first-layer line pulls from 7,500 daN to 30,000 daN (about 7.5 to 30 tonnes) on 18 mm to 32 mm rope, for deck and offshore cranes, crawler cranes and drilling rigs.

Indus Hydraulics is an authorised Dinamic Oil distributor and supplies direct from Dinamic Oil's factory in Bomporto, Italy.

Drums and options

Drum length and diameter are made to order above the catalogue minimums, with a smooth drum, standard grooving or Lebus-type grooving. Every accessory of the hydraulic winch range can be fitted — rope tensioner, rotary limit switches, the ELD load detection system and load limiters. The rope is anchored with clamps as standard, or a wedge lock on request.

Drive

The WDD drums are built on Dinamic Oil's WD planetary winch drives, with their negative multi-disc brake and oil-bath lubrication. The three-stage WD drives hold DNV type approval TAS00000YS; certification of a complete drum is quoted per project.

Sizing

Choose the drum on the line pull at the layer you lift from. With a reeved hook block, divide the hook load by the number of falls and the reeving efficiency: 10,000 daN on four falls with plain-bearing sheaves needs 10,000 ÷ (4 × 0.93) = 2,690 daN at the drum. Rope capacity follows from the drum length and diameter, the rope diameter and the number of layers; leave a flange margin above the top layer of 1.5 rope diameters, or 2 to 2.5 where DNV, ABS or API 2C rules apply.

Lubrication and service

Oil bath, ISO VG 220 to 320 EP gear oil. First change after 150 operating hours, then at the catalogue interval or at least every two years. Standard ambient range −20 °C to +40 °C.

Options and accessories

  • Brakes: FW negative multi-disc brakes from 230 to 1,600 Nm and FY brakes from 1,840 to 3,600 Nm static torque, SAE B, C or D motor flanges; low-opening-pressure versions for brakes controlled from the charge pump; special-lubrication versions for continuous input above 1,500 rpm; optional freewheel (sprag clutch) against load drop while hoisting. See brakes for winch drives.
  • Configurations: without brake, set up for an electric motor, or with a high-speed input shaft; other motor inputs on demand.
  • Drum (WDD): smooth, standard grooved or Lebus-type grooved, length and diameter to order; rope anchored with clamps or a wedge lock; clockwise or counterclockwise, overshot or underpull.
  • Winch accessories: every accessory of the hydraulic winch range — rope tensioner, limit switches, load limiters and the ELD load detection system. See hydraulic winch accessories.
  • Certification: DNV type approval on RW and three-stage WD; product certificates or design approval from other societies on request.

Identification

ParameterValue
Product typeMotorized winch drum
SeriesDinamic Oil WDD
ExecutionDrum with built-in rotating-case planetary drive

Performance

ParameterValue
Line pull, 1st layer7,500 to 30,000 daN
Rope diameter18 to 32 mm (suggested)

Construction

ParameterValue
Motor / inputHydraulic motor (SAE flange), electric on request
BrakeNegative multi-disc (WD drive)
Output / mountingSmooth, standard grooved or Lebus-grooved drum, length to order
LubricationOil bath, ISO VG 220–320 EP gear oil; first change after 150 h, then by the catalogue interval or at least every 2 years

Compliance

ParameterValue
Type approvalWD drive: DNV TAS00000YS; drum per project

Supply

ParameterValue
Made inItaly (Dinamic Oil S.p.A., Bomporto)
SupplyAuthorised distributor, direct from the factory

Shipping & lead time

Lead TimeEx-stock from Dubai — delivered within 3 working days in the UAE. Export orders ship on the lane stated for the destination.

Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations

From the blog

Written about this part

RELATED · OFTEN PAIRED WITH

Engineers viewing this also looked at