Dinamic Oil Brakes for WD and RW Winch Drives — FW, FY, F5 and F9

Dinamic Oil FW, FY, F5 and F9 negative multi-disc brakes for WD and RW planetary winch drives: 31 models, 110 to 3,600 Nm, low-opening-pressure and freewheel versions. From Indus Hydraulics, authorised Dinamic Oil distributor, UAE.
Key features
- Product type: Winch drive brake
- Series: Dinamic Oil FW, FY, F5, F9
- Execution: Negative static multi-disc, hydraulically released
- Output torque: 110 to 3,600 Nm static (±5 %)
- Motor / input: SAE B, SAE C, SAE D, ST, MU
- Product type
- Winch drive brake
- Series
- Dinamic Oil FW, FY, F5, F9
Product description
The brakes for Dinamic Oil's WD and RW planetary winch drives are negative static multi-disc brakes, released hydraulically and applied by springs, so the drum is held whenever the control pressure falls to zero. They are sized to the winch drive's torque in line with the main classification societies, and mount between the hydraulic motor and the drive input.
Indus Hydraulics is an authorised Dinamic Oil distributor and supplies direct from Dinamic Oil's factory in Bomporto, Italy.
Range
- FW (WD drives) — 230 to 1,600 Nm, SAE B, SAE C, SAE D or integral ST input, up to 3,500 rpm input, optional freewheel up to 1,160 Nm.
- FY (WD drives) — 1,840 to 3,600 Nm, SAE B, SAE C, SAE D or integral MU input, up to 2,800 rpm, optional freewheel up to 3,070 Nm.
- F5 and F9 (RW drives) — 110 to 1,335 Nm, ST universal input (F5) or SAE C, SAE D and ST (F9); F9 with optional freewheel.
The table gives each model's static torque (±5 %), opening and maximum pressure, maximum input speed and the drive it serves. The FY26 torque is printed inconsistently in the catalogue and is confirmed with the order.
Versions
- Low opening pressure — for winches whose brake is controlled from the charge (boost) pump of a closed-loop circuit.
- Special lubrication — for continuous input speeds above 1,500 rpm without overheating.
- Freewheel (sprag clutch) — lets the drive turn freely in the hoisting direction while the brake stays applied, a protection against load drop when hoisting starts.
Selection
The brake's static torque times the drive ratio must hold the drum torque of the heaviest load with the margin the class rules require, and must not exceed the drive's maximum static torque. Back-pressure in the release line reduces the holding torque, so drain the brake line freely to tank.
Identification
| Parameter | Value |
|---|---|
| Product type | Winch drive brake |
| Series | Dinamic Oil FW, FY, F5, F9 |
| Execution | Negative static multi-disc, hydraulically released |
Performance
| Parameter | Value |
|---|---|
| Output torque | 110 to 3,600 Nm static (±5 %) |
Hydraulics
| Parameter | Value |
|---|---|
| Working pressure | Max 300 bar |
Construction
| Parameter | Value |
|---|---|
| Motor / input | SAE B, SAE C, SAE D, ST, MU |
| Output / mounting | WD (FW, FY) and RW (F5, F9) winch drives |
Supply
| Parameter | Value |
|---|---|
| Made in | Italy (Dinamic Oil S.p.A., Bomporto) |
| Supply | Authorised distributor, direct from the factory |
Shipping & lead time
Sizes & part numbers
31 sizes- Indus part no.IH-DO-WBRK-FW02
- Description
- FW02 — opens at 15 bar, max 300 bar
- Max speed (rpm)
- 3,500
- Brake torque (Nm)
- 230
- Mount
- WD winch drives
- Indus part no.IH-DO-WBRK-FW03
- Description
- FW03 — opens at 15 bar, max 300 bar
- Max speed (rpm)
- 3,500
- Brake torque (Nm)
- 340
- Mount
- WD winch drives
- Indus part no.IH-DO-WBRK-FW04
- Description
- FW04 — opens at 14 bar, max 300 bar
- Max speed (rpm)
- 3,500
- Brake torque (Nm)
- 420
- Mount
- WD winch drives
- Indus part no.IH-DO-WBRK-FW05
- Description
- FW05 — opens at 17.5 bar, max 300 bar
- Max speed (rpm)
- 3,500
- Brake torque (Nm)
- 550
- Mount
- WD winch drives
- Indus part no.IH-DO-WBRK-FW06
- Description
- FW06 — opens at 12.5 bar, max 300 bar
- Max speed (rpm)
- 3,500
- Brake torque (Nm)
- 660
- Mount
- WD winch drives
- Indus part no.IH-DO-WBRK-FW08
- Description
- FW08 — opens at 17.5 bar, max 300 bar
- Max speed (rpm)
- 3,500
- Brake torque (Nm)
- 800
- Mount
- WD winch drives
- Indus part no.IH-DO-WBRK-FW10
- Description
- FW10 — opens at 16 bar, max 300 bar
- Max speed (rpm)
- 3,500
- Brake torque (Nm)
- 1000
- Mount
- WD winch drives
- Indus part no.IH-DO-WBRK-FW11
- Description
- FW11 — opens at 17.5 bar, max 300 bar
- Max speed (rpm)
- 3,500
- Brake torque (Nm)
- 1100
- Mount
- WD winch drives
Show all 31 sizesShow fewer sizes
- Indus part no.IH-DO-WBRK-FW13
- Description
- FW13 — opens at 17.5 bar, max 300 bar
- Max speed (rpm)
- 3,500
- Brake torque (Nm)
- 1300
- Mount
- WD winch drives
- Indus part no.IH-DO-WBRK-FW16
- Description
- FW16 — opens at 17.5 bar, max 300 bar
- Max speed (rpm)
- 3,500
- Brake torque (Nm)
- 1600
- Mount
- WD winch drives
- Indus part no.IH-DO-WBRK-FY18
- Description
- FY18 — opens at 18 bar, max 300 bar
- Max speed (rpm)
- 2,800
- Brake torque (Nm)
- 1840
- Mount
- WD winch drives
- Indus part no.IH-DO-WBRK-FY22
- Description
- FY22 — opens at 17.5 bar, max 300 bar
- Max speed (rpm)
- 2,800
- Brake torque (Nm)
- 2200
- Mount
- WD winch drives
- Indus part no.IH-DO-WBRK-FY26
- Description
- FY26 — opens at 17 bar, max 300 bar (torque confirmed per order)
- Max speed (rpm)
- 2,800
- Brake torque (Nm)
- —
- Mount
- WD winch drives
- Indus part no.IH-DO-WBRK-FY27
- Description
- FY27 — opens at 17.5 bar, max 300 bar
- Max speed (rpm)
- 2,800
- Brake torque (Nm)
- 2700
- Mount
- WD winch drives
- Indus part no.IH-DO-WBRK-FY36
- Description
- FY36 — opens at 17.5 bar, max 300 bar
- Max speed (rpm)
- 2,800
- Brake torque (Nm)
- 3600
- Mount
- WD winch drives
- Indus part no.IH-DO-WBRK-F501
- Description
- F501 — opens at 10 bar, max 300 bar
- Max speed (rpm)
- —
- Brake torque (Nm)
- 110
- Mount
- RW winch drives
- Indus part no.IH-DO-WBRK-F502
- Description
- F502 — opens at 20 bar, max 300 bar
- Max speed (rpm)
- —
- Brake torque (Nm)
- 215
- Mount
- RW winch drives
- Indus part no.IH-DO-WBRK-F503
- Description
- F503 — opens at 30 bar, max 300 bar
- Max speed (rpm)
- —
- Brake torque (Nm)
- 325
- Mount
- RW winch drives
- Indus part no.IH-DO-WBRK-F504
- Description
- F504 — opens at 38 bar, max 300 bar
- Max speed (rpm)
- —
- Brake torque (Nm)
- 405
- Mount
- RW winch drives
- Indus part no.IH-DO-WBRK-F505
- Description
- F505 — opens at 28 bar, max 300 bar
- Max speed (rpm)
- —
- Brake torque (Nm)
- 500
- Mount
- RW winch drives
- Indus part no.IH-DO-WBRK-F506
- Description
- F506 — opens at 35 bar, max 300 bar
- Max speed (rpm)
- —
- Brake torque (Nm)
- 630
- Mount
- RW winch drives
- Indus part no.IH-DO-WBRK-F508
- Description
- F508 — opens at 33 bar, max 300 bar
- Max speed (rpm)
- —
- Brake torque (Nm)
- 818
- Mount
- RW winch drives
- Indus part no.IH-DO-WBRK-F902
- Description
- F902 — opens at 14 bar, max 300 bar
- Max speed (rpm)
- —
- Brake torque (Nm)
- 200
- Mount
- RW winch drives
- Indus part no.IH-DO-WBRK-F903
- Description
- F903 — opens at 22 bar, max 300 bar
- Max speed (rpm)
- —
- Brake torque (Nm)
- 310
- Mount
- RW winch drives
- Indus part no.IH-DO-WBRK-F904
- Description
- F904 — opens at 19 bar, max 300 bar
- Max speed (rpm)
- —
- Brake torque (Nm)
- 400
- Mount
- RW winch drives
- Indus part no.IH-DO-WBRK-F905
- Description
- F905 — opens at 18 bar, max 300 bar
- Max speed (rpm)
- —
- Brake torque (Nm)
- 490
- Mount
- RW winch drives
- Indus part no.IH-DO-WBRK-F906
- Description
- F906 — opens at 23 bar, max 300 bar
- Max speed (rpm)
- —
- Brake torque (Nm)
- 620
- Mount
- RW winch drives
- Indus part no.IH-DO-WBRK-F908
- Description
- F908 — opens at 23 bar, max 300 bar
- Max speed (rpm)
- —
- Brake torque (Nm)
- 780
- Mount
- RW winch drives
- Indus part no.IH-DO-WBRK-F910
- Description
- F910 — opens at 29 bar, max 300 bar
- Max speed (rpm)
- —
- Brake torque (Nm)
- 1000
- Mount
- RW winch drives
- Indus part no.IH-DO-WBRK-F912
- Description
- F912 — opens at 34 bar, max 300 bar
- Max speed (rpm)
- —
- Brake torque (Nm)
- 1160
- Mount
- RW winch drives
- Indus part no.IH-DO-WBRK-F915
- Description
- F915 — opens at 38 bar, max 300 bar
- Max speed (rpm)
- —
- Brake torque (Nm)
- 1335
- Mount
- RW winch drives
Description — What this part number is, as the manufacturer lists it. Max speed — Maximum shaft speed, as published. Brake torque — Static torque of the negative (spring-applied) brake, as published. Mount — Mounting flange or pattern, as published.
Pressure, flow, speed, torque and load figures are the manufacturer’s published ratings for that part number. A circuit is limited by its lowest-rated component, so check them against the hose, fittings and valves it connects to.
What are Dinamic Oil FW, FY, F5 and F9 winch drive brakes?▾
How do I read winch brake codes such as FW02, FY18, F501 and F915?▾
What torque range do the winch drive brakes cover?▾
How do I select a winch drive brake?▾
Why does a winch drive brake lose holding torque?▾
What does the freewheel version of a winch brake do?▾
When do I need a low-opening-pressure winch brake?▾
Do WD and RW winch drives use the same brakes?▾
What input flanges and speeds do the winch drive brakes take?▾
Are the winch drive brakes sized to class rules?▾
Are Dinamic Oil winch drive brakes from Indus Hydraulics genuine?▾
Do you supply Dinamic Oil winch drive brakes from Dubai?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
From the blog
Written about this range
Safety & HSE
Crane winch load monitoring: limit switches, pull limiters, load cells and ELD
A crane winch can stop itself at the end of the rope, refuse to lift an overload, or tell the operator exactly what is on the hook. What each kind of winch load protection does, how it measures, and which one a crane needs.
4 min read
Lifting & rigging
Choosing a recovery winch for tow trucks: pull, cable, freewheel and fairlead
A recovery winch is sized on the pull it needs on the layer it works from, then fitted out for the job: freewheel to walk the cable out, a fairlead for angled pulls, and the right cable. How to choose one, with Dinamic Oil’s T series as the worked example.
3 min read
Maintenance & reliability
Sugar mill gearbox drives: planetary drives for mills, diffusers and cane handling
A sugar factory runs dozens of drives through a crushing season, from the cane carrier to the dryer, and the mill drives carry millions of newton-metres. Where planetary gearboxes fit in a cane mill, how mill drives are sized, and what to check for continuous seasonal duty.
3 min read



