Balanced Bellows Safety Relief Valve, API 526

Balanced bellows safety relief valves to API 520 and 526: orifice D to T, 1/2" to 20", Class 150 to 2500; the bellows cancels back pressure and shields the spring and guide from the fluid.
Key features
- Valve type: Safety relief valve, balanced bellows
- Construction: Bellows-balanced disc, vented bonnet
- Design standard: API 520, API 526, ASME VIII, ISO 4126-1
- Size range: 1/2" to 20" (DN15 to DN500)
- Pressure class: ASME Class 150 to 2500 (PN10 to PN420)
- Body material: Carbon steel, alloy steel, stainless steel, duplex, nickel alloys
- End connections: Flanged; threaded, socket-weld or butt-weld on request
- Operation: Self-acting, spring loaded
- Design standard
- API 520, API 526, ASME VIII, ISO 4126-1
- Pressure class
- ASME Class 150 to 2500 (PN10 to PN420)
- End connections
- Flanged; threaded, socket-weld or butt-weld on request
- Operation
- Self-acting, spring loaded
- Valve type
- Safety relief valve, balanced bellows
Product description
For relief into closed headers where back pressure varies. A bellows between disc and bonnet balances the effect of back pressure on the disc, so the set pressure stays true, and it also keeps corrosive or fouling fluid away from the spring and guide. Dimensions are the same as the conventional valve of the same orifice.
A safety relief valve opens automatically when pressure reaches its set point and closes again once it falls, protecting a vessel, line or tank from bursting. It is the last safeguard after the control system, so it is sized to the worst relieving case, set and tested on the bench, and sealed against tampering.
Construction
- Bellows balances back pressure on the disc
- Spring and guide isolated from the process fluid
- Bonnet vent to show a bellows leak
- Same API 526 envelope as the conventional valve
Sizes and ratings
Published range: 1/2" to 20" (DN15 to DN500), ASME Class 150 to 2500 (PN10 to PN420), in carbon steel, alloy steel, stainless steel, duplex, nickel alloys. End connections: Flanged; threaded, socket-weld or butt-weld on request. Operation: self-acting, spring loaded.
Each valve is sized to the relieving case; the data sheet and general arrangement drawing come with the quotation.
Testing and documents
Set-pressure test on the bench, seat-tightness test to API 527 and shell test to ASME requirements, with the material certificates and the pressure-test record supplied with the valve. Third-party inspection and extra tests are added when the order specifies them.
Supply
Balanced bellows relief valves are supplied from Dubai to projects, plants and maintenance teams across the GCC, the wider Middle East and Africa. Most are built to the order specification, so delivery depends on size, class, material and operator; standard carbon-steel sizes move fastest. We review the data sheet before quoting and flag anything that needs clarifying, such as a missing pipe schedule or an operator torque that has not been sized.
Related valves
Other safety and relief valves in the range, for comparison when the duty is not settled yet: Safety Relief Valve with Packed Lever, Safety Relief Valve with Open Lever, Steam and Air, Low-Lift Safety Relief Valve, DN15 to DN200, High-Performance Steam Safety Valve, ASME Section I.
Standards
| Parameter | Value |
|---|---|
| Design standard | API 520, API 526, ASME VIII, ISO 4126-1 |
| Face-to-face / end-to-end | API 526 centre-to-face |
| Pressure testing | Set-pressure test on the bench, seat-tightness test to API 527 and shell test to ASME requirements |
Range
| Parameter | Value |
|---|---|
| Size range | 1/2" to 20" (DN15 to DN500) |
| Pressure class | ASME Class 150 to 2500 (PN10 to PN420) |
| Temperature range | Up to 537 °C, by body material |
Materials
| Parameter | Value |
|---|---|
| Body material | Carbon steel, alloy steel, stainless steel, duplex, nickel alloys |
| Seat and trim | Metal or soft seat |
Construction
| Parameter | Value |
|---|---|
| End connections | Flanged; threaded, socket-weld or butt-weld on request |
| Operation | Self-acting, spring loaded |
Identification
| Parameter | Value |
|---|---|
| Valve type | Safety relief valve, balanced bellows |
| Construction | Bellows-balanced disc, vented bonnet |
Application
| Parameter | Value |
|---|---|
| Typical service | Relief into closed headers with variable back pressure; corrosive fluids |
Supply
| Parameter | Value |
|---|---|
| Supply | Built to order and supplied from Dubai with material certificates and the test record |
Shipping & lead time
What is the Balanced Bellows Safety Relief Valve, API 526 and what is it used for?▾
How does the bellows in the balanced bellows safety relief valve work?▾
What sizes and pressure classes does the Balanced Bellows Safety Relief Valve, API 526 cover?▾
When is a balanced bellows valve needed instead of a conventional valve?▾
What pressure and temperature range does the Balanced Bellows Safety Relief Valve, API 526 work in?▾
What body materials does the Balanced Bellows Safety Relief Valve, API 526 come in?▾
Which standards apply to the Balanced Bellows Safety Relief Valve, API 526, and how is it tested?▾
What end connections and operation does the Balanced Bellows Safety Relief Valve, API 526 have?▾
Why must the bonnet vent of a balanced bellows valve stay open?▾
How does the balanced bellows valve differ from the conventional safety relief valve?▾
What documents come with the Balanced Bellows Safety Relief Valve, API 526, and can you supply against a project specification?▾
How is the Balanced Bellows Safety Relief Valve, API 526 supplied, and how long does it take?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
From the blog








