Safety Relief Valve with Packed Lever

Spring-loaded safety relief valves with a packed (sealed) lifting lever: 1/2" to 20", Class 150 to 2500, manual test lift above 75 % of set pressure without letting fluid escape at the cap.
Key features
- Valve type: Safety relief valve, packed lever
- Construction: Closed bonnet with packed lifting lever
- Design standard: API 520, API 526, ASME VIII, ISO 4126-1
- Size range: 1/2" to 20" (DN15 to DN500)
- Pressure class: ASME Class 150 to 2500 (PN10 to PN420)
- Body material: Carbon steel, alloy steel, stainless steel, duplex, nickel alloys
- End connections: Flanged; threaded, socket-weld or butt-weld on request
- Operation: Self-acting, spring loaded
- Design standard
- API 520, API 526, ASME VIII, ISO 4126-1
- Pressure class
- ASME Class 150 to 2500 (PN10 to PN420)
- End connections
- Flanged; threaded, socket-weld or butt-weld on request
- Operation
- Self-acting, spring loaded
- Valve type
- Safety relief valve, packed lever
Product description
A relief valve that can be lifted by hand to prove it is free, once operating pressure is above 75 % of set pressure, as part of routine safety checks. The packed lever seals the cap, so the fluid cannot escape through the top when the valve opens: the choice where any leakage at the cap is unacceptable.
A safety relief valve opens automatically when pressure reaches its set point and closes again once it falls, protecting a vessel, line or tank from bursting. It is the last safeguard after the control system, so it is sized to the worst relieving case, set and tested on the bench, and sealed against tampering.
Construction
- Packed lifting lever: sealed cap
- Manual lift above 75 % of set pressure
- Closed bonnet; conventional or bellows
- API 526 dimensions
Sizes and ratings
Published range: 1/2" to 20" (DN15 to DN500), ASME Class 150 to 2500 (PN10 to PN420), in carbon steel, alloy steel, stainless steel, duplex, nickel alloys. End connections: Flanged; threaded, socket-weld or butt-weld on request. Operation: self-acting, spring loaded.
Each valve is sized to the relieving case; the data sheet and general arrangement drawing come with the quotation.
Testing and documents
Set-pressure test on the bench, seat-tightness test to API 527 and shell test to ASME requirements, with the material certificates and the pressure-test record supplied with the valve. Third-party inspection and extra tests are added when the order specifies them.
Supply
Packed-lever relief valves are supplied from Dubai to projects, plants and maintenance teams across the GCC, the wider Middle East and Africa. Most are built to the order specification, so delivery depends on size, class, material and operator; standard carbon-steel sizes move fastest. We review the data sheet before quoting and flag anything that needs clarifying, such as a missing pipe schedule or an operator torque that has not been sized.
Related valves
Other safety and relief valves in the range, for comparison when the duty is not settled yet: Safety Relief Valve with Open Lever, Steam and Air, Low-Lift Safety Relief Valve, DN15 to DN200, High-Performance Steam Safety Valve, ASME Section I, Jacketed Safety Relief Valve, Bellows Type.
Standards
| Parameter | Value |
|---|---|
| Design standard | API 520, API 526, ASME VIII, ISO 4126-1 |
| Face-to-face / end-to-end | API 526 centre-to-face |
| Pressure testing | Set-pressure test on the bench, seat-tightness test to API 527 and shell test to ASME requirements |
Range
| Parameter | Value |
|---|---|
| Size range | 1/2" to 20" (DN15 to DN500) |
| Pressure class | ASME Class 150 to 2500 (PN10 to PN420) |
| Temperature range | By body material |
Materials
| Parameter | Value |
|---|---|
| Body material | Carbon steel, alloy steel, stainless steel, duplex, nickel alloys |
Construction
| Parameter | Value |
|---|---|
| End connections | Flanged; threaded, socket-weld or butt-weld on request |
| Operation | Self-acting, spring loaded |
Identification
| Parameter | Value |
|---|---|
| Valve type | Safety relief valve, packed lever |
| Construction | Closed bonnet with packed lifting lever |
Application
| Parameter | Value |
|---|---|
| Typical service | Process fluids where cap leakage is unacceptable |
Supply
| Parameter | Value |
|---|---|
| Supply | Built to order and supplied from Dubai with material certificates and the test record |
Shipping & lead time
What is the Safety Relief Valve with Packed Lever and what is it used for?▾
Why lift a safety relief valve by hand?▾
What sizes and pressure classes does the Safety Relief Valve with Packed Lever cover?▾
Should I choose a packed lever or an open lever safety relief valve?▾
What pressure and temperature range does the Safety Relief Valve with Packed Lever work in?▾
What body materials does the Safety Relief Valve with Packed Lever come in?▾
Which standards apply to the Safety Relief Valve with Packed Lever, and how is it tested?▾
What end connections and operation does the Safety Relief Valve with Packed Lever have?▾
How do I check a packed lever safety relief valve in service?▾
How does the packed lever valve differ from the open lever valve?▾
What documents come with the Safety Relief Valve with Packed Lever, and can you supply against a project specification?▾
How is the Safety Relief Valve with Packed Lever supplied, and how long does it take?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
From the blog








