High-Performance Steam Safety Valve, ASME Section I

Steam safety valves to ASME Section I for boilers and high-temperature steam above 350 °C: open within 3 % over-pressure, reseat within 4 % blowdown, twin adjusting rings, extended bonnet.
Key features
- Valve type: Safety valve, steam, ASME Section I
- Construction: Twin adjusting rings, extended bonnet, open yoke
- Design standard: ASME Section I
- Size range: 1/2" to 20" (DN15 to DN500)
- Pressure class: ASME Class 150 to 2500 (PN10 to PN420)
- Body material: Carbon steel, alloy steel, stainless steel, duplex, nickel alloys
- End connections: Flanged; threaded, socket-weld or butt-weld on request
- Operation: Self-acting, spring loaded
- Design standard
- ASME Section I
- Pressure class
- ASME Class 150 to 2500 (PN10 to PN420)
- End connections
- Flanged; threaded, socket-weld or butt-weld on request
- Operation
- Self-acting, spring loaded
- Valve type
- Safety valve, steam, ASME Section I
Product description
For boilers, superheaters and steam lines, where the code demands that the valve open within 3 % over-pressure and reseat within 4 % blowdown. Two adjusting rings tune the opening and reseating, and an extended bonnet keeps the spring clear of steam above 350 °C.
A safety relief valve opens automatically when pressure reaches its set point and closes again once it falls, protecting a vessel, line or tank from bursting. It is the last safeguard after the control system, so it is sized to the worst relieving case, set and tested on the bench, and sealed against tampering.
Construction
- Two adjusting rings for precise lift and blowdown
- Extended bonnet shields the spring from high-temperature steam
- Open yoke; lifting lever
- ASME Section I capacity certification on request
Sizes and ratings
Published range: 1/2" to 20" (DN15 to DN500), ASME Class 150 to 2500 (PN10 to PN420), in carbon steel, alloy steel, stainless steel, duplex, nickel alloys. End connections: Flanged; threaded, socket-weld or butt-weld on request. Operation: self-acting, spring loaded.
Each valve is sized to the relieving case; the data sheet and general arrangement drawing come with the quotation.
Testing and documents
Set-pressure test on steam, seat-leakage test with no visible steam leakage, and shell test to ASME Section I, with the material certificates and the pressure-test record supplied with the valve. Third-party inspection and extra tests are added when the order specifies them.
Supply
Steam safety valves are supplied from Dubai to projects, plants and maintenance teams across the GCC, the wider Middle East and Africa. Most are built to the order specification, so delivery depends on size, class, material and operator; standard carbon-steel sizes move fastest. We review the data sheet before quoting and flag anything that needs clarifying, such as a missing pipe schedule or an operator torque that has not been sized.
Related valves
Other safety and relief valves in the range, for comparison when the duty is not settled yet: Jacketed Safety Relief Valve, Bellows Type, Pilot-Operated Safety Relief Valve, API 526, High-Temperature Pilot-Operated Safety Valve, Steam, Thermal Relief Valve, Threaded, 1/2" to 1-1/2".
Standards
| Parameter | Value |
|---|---|
| Design standard | ASME Section I |
| Pressure testing | Set-pressure test on steam, seat-leakage test with no visible steam leakage, shell test to ASME Section I |
Range
| Parameter | Value |
|---|---|
| Size range | 1/2" to 20" (DN15 to DN500) |
| Pressure class | ASME Class 150 to 2500 (PN10 to PN420) |
| Temperature range | Steam above 350 °C |
Materials
| Parameter | Value |
|---|---|
| Body material | Carbon steel, alloy steel, stainless steel, duplex, nickel alloys |
Construction
| Parameter | Value |
|---|---|
| End connections | Flanged; threaded, socket-weld or butt-weld on request |
| Operation | Self-acting, spring loaded |
Identification
| Parameter | Value |
|---|---|
| Valve type | Safety valve, steam, ASME Section I |
| Construction | Twin adjusting rings, extended bonnet, open yoke |
Application
| Parameter | Value |
|---|---|
| Typical service | Boilers, superheaters and steam lines |
Supply
| Parameter | Value |
|---|---|
| Supply | Built to order and supplied from Dubai with material certificates and the test record |
Shipping & lead time
What is the High-Performance Steam Safety Valve, ASME Section I and what is it used for?▾
What do the 3 % over-pressure and 4 % blowdown figures mean on the steam safety valve?▾
What sizes and pressure classes does the High-Performance Steam Safety Valve, ASME Section I cover?▾
Which steam safety valve do I need for a boiler, a superheater or a steam header?▾
What pressure and temperature range does the High-Performance Steam Safety Valve, ASME Section I work in?▾
What body materials does the High-Performance Steam Safety Valve, ASME Section I come in?▾
Which standards apply to the High-Performance Steam Safety Valve, ASME Section I, and how is it tested?▾
What end connections and operation does the High-Performance Steam Safety Valve, ASME Section I have?▾
How is the steam safety valve tested and fitted?▾
How does the high-performance steam safety valve differ from the open lever steam valve?▾
What documents come with the High-Performance Steam Safety Valve, ASME Section I, and can you supply against a project specification?▾
How is the High-Performance Steam Safety Valve, ASME Section I supplied, and how long does it take?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
From the blog








