Conventional Safety Relief Valve, API 526, Orifice D to T

Conventional spring-loaded safety relief valves to API 520 and 526: orifice D to T, 1/2" to 20", Class 150 to 2500, pop action, for gas, vapour, steam and liquid service.
Key features
- Valve type: Safety relief valve, conventional, spring loaded
- Construction: Full-lift disc, adjusting ring, closed bonnet
- Design standard: API 520, API 526, ASME VIII, ISO 4126-1
- Size range: 1/2" to 20" (DN15 to DN500)
- Pressure class: ASME Class 150 to 2500 (PN10 to PN420)
- Body material: Carbon steel, alloy steel, stainless steel, duplex, nickel alloys
- End connections: Flanged; threaded, socket-weld or butt-weld on request
- Operation: Self-acting, spring loaded
- Design standard
- API 520, API 526, ASME VIII, ISO 4126-1
- Pressure class
- ASME Class 150 to 2500 (PN10 to PN420)
- End connections
- Flanged; threaded, socket-weld or butt-weld on request
- Operation
- Self-acting, spring loaded
- Valve type
- Safety relief valve, conventional, spring loaded
Product description
The standard full-lift relief valve for vessels, lines and equipment in gas, vapour and steam service, and in liquid service with liquid trim. It opens fast at set pressure and recloses as pressure falls. Its set pressure is affected by back pressure in the discharge system, so it suits discharge to atmosphere or to a header with low, steady back pressure.
A safety relief valve opens automatically when pressure reaches its set point and closes again once it falls, protecting a vessel, line or tank from bursting. It is the last safeguard after the control system, so it is sized to the worst relieving case, set and tested on the bench, and sealed against tampering.
Construction
- Full-lift disc with adjusting ring for pop action and blowdown
- Closed bonnet; cap or lever top
- API 526 orifice letters D to T, inlet and outlet flange ratings to the table
- Soft-seat option for tight shut-off near set pressure
Sizes and ratings
Published range: 1/2" to 20" (DN15 to DN500), ASME Class 150 to 2500 (PN10 to PN420), in carbon steel, alloy steel, stainless steel, duplex, nickel alloys. End connections: Flanged; threaded, socket-weld or butt-weld on request. Operation: self-acting, spring loaded.
The size table lists API 526 combinations of orifice, inlet × outlet size and flange ratings with the centre-to-face dimensions A and B in millimetres. They were read from the catalogue by OCR and checked against the API 526 size pairs; the general arrangement drawing confirms them with the quotation.
Testing and documents
Set-pressure test on the bench, seat-tightness test to API 527 and shell test to ASME requirements, with the material certificates and the pressure-test record supplied with the valve. Third-party inspection and extra tests are added when the order specifies them.
Supply
Safety relief valves are supplied from Dubai to projects, plants and maintenance teams across the GCC, the wider Middle East and Africa. Most are built to the order specification, so delivery depends on size, class, material and operator; standard carbon-steel sizes move fastest. We review the data sheet before quoting and flag anything that needs clarifying, such as a missing pipe schedule or an operator torque that has not been sized.
Related valves
Other safety and relief valves in the range, for comparison when the duty is not settled yet: Balanced Bellows Safety Relief Valve, API 526, Safety Relief Valve with Packed Lever, Safety Relief Valve with Open Lever, Steam and Air, Low-Lift Safety Relief Valve, DN15 to DN200.
Standards
| Parameter | Value |
|---|---|
| Design standard | API 520, API 526, ASME VIII, ISO 4126-1 |
| Face-to-face / end-to-end | API 526 centre-to-face |
| Pressure testing | Set-pressure test on the bench, seat-tightness test to API 527 and shell test to ASME requirements |
Range
| Parameter | Value |
|---|---|
| Size range | 1/2" to 20" (DN15 to DN500) |
| Pressure class | ASME Class 150 to 2500 (PN10 to PN420) |
| Temperature range | Up to 537 °C, by body material |
Materials
| Parameter | Value |
|---|---|
| Body material | Carbon steel, alloy steel, stainless steel, duplex, nickel alloys |
| Seat and trim | Metal or soft seat; liquid trim available |
Construction
| Parameter | Value |
|---|---|
| End connections | Flanged; threaded, socket-weld or butt-weld on request |
| Operation | Self-acting, spring loaded |
Identification
| Parameter | Value |
|---|---|
| Valve type | Safety relief valve, conventional, spring loaded |
| Construction | Full-lift disc, adjusting ring, closed bonnet |
Application
| Parameter | Value |
|---|---|
| Typical service | Gas, vapour, steam and liquid over-pressure protection |
Supply
| Parameter | Value |
|---|---|
| Supply | Built to order and supplied from Dubai with material certificates and the test record |
Shipping & lead time
Sizes & part numbers
126 sizes- Indus part no.IH-SR-CSV-D-01000200-150-150
- Type
- Orifice D
- Size
- 1" × 2"
- Class
- Inlet 150 / outlet 150
- A (mm)
- 105
- B (mm)
- 115
- Indus part no.IH-SR-CSV-D-01000200-300-150
- Type
- Orifice D
- Size
- 1" × 2"
- Class
- Inlet 300 / outlet 150
- A (mm)
- 105
- B (mm)
- 115
- Indus part no.IH-SR-CSV-D-01000200-300-300
- Type
- Orifice D
- Size
- 1" × 2"
- Class
- Inlet 300 / outlet 300
- A (mm)
- 105
- B (mm)
- 115
- Indus part no.IH-SR-CSV-D-01000200-300A-150
- Type
- Orifice D
- Size
- 1" × 2"
- Class
- Inlet 300 (alt.) / outlet 150
- A (mm)
- 105
- B (mm)
- 115
- Indus part no.IH-SR-CSV-D-01000200-300A-300
- Type
- Orifice D
- Size
- 1" × 2"
- Class
- Inlet 300 (alt.) / outlet 300
- A (mm)
- 105
- B (mm)
- 115
- Indus part no.IH-SR-CSV-D-01000200-600-150
- Type
- Orifice D
- Size
- 1" × 2"
- Class
- Inlet 600 / outlet 150
- A (mm)
- 105
- B (mm)
- 115
- Indus part no.IH-SR-CSV-D-01000200-600-300
- Type
- Orifice D
- Size
- 1" × 2"
- Class
- Inlet 600 / outlet 300
- A (mm)
- 105
- B (mm)
- 115
- Indus part no.IH-SR-CSV-D-01000200-600-600
- Type
- Orifice D
- Size
- 1" × 2"
- Class
- Inlet 600 / outlet 600
- A (mm)
- 105
- B (mm)
- 115
Show all 126 sizesShow fewer sizes
Type — Valve type of this row, where one listing covers several. Size — Nominal pipe size (NPS), as published. Class — Pressure class or working pressure the row is built to (ASME Class, PN or psi), as published. A — Dimension A on the manufacturer dimension drawing. B — Dimension B on the manufacturer dimension drawing. Ask us for the dimension drawing if you need it stamped.
Lengths are in millimetres and weights in kilograms, as published for each size and class. The end connection, trim, seat and operator you order can change the length and weight, so we confirm the general arrangement drawing with the quotation.
What is the Conventional Safety Relief Valve, API 526, Orifice D to T and what is it used for?▾
How do I read the API 526 orifice letters D to T on the conventional safety relief valve?▾
What sizes and pressure classes does the Conventional Safety Relief Valve, API 526, Orifice D to T cover?▾
How do I choose the orifice for the conventional safety relief valve?▾
What pressure and temperature range does the conventional API 526 safety relief valve work in?▾
What body materials does the conventional API 526 safety relief valve come in?▾
Which standards apply to the conventional API 526 safety relief valve, and how is it tested?▾
What end connections and operation does the conventional API 526 safety relief valve have?▾
How is the conventional safety relief valve set, tested and maintained?▾
How does the conventional safety relief valve differ from the balanced bellows and pilot-operated valves?▾
What documents come with the conventional API 526 safety relief valve, and can you supply against a project specification?▾
How is the conventional API 526 safety relief valve supplied, and how long does it take?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
From the blog








