Low-Lift Safety Relief Valve, DN15 to DN200

Low-lift (proportional) safety relief valves for liquid service: DN15 to DN200, PN10 to PN420, ISO 4126-1, opening in proportion to over-pressure to avoid surge.
Key features
- Valve type: Safety relief valve, low lift
- Construction: Proportional low-lift disc
- Design standard: ISO 4126-1
- Size range: DN15 to DN200
- Pressure class: PN10 to PN420
- Body material: Carbon steel, alloy steel, stainless steel, duplex, nickel alloys
- End connections: Flanged, threaded, socket-weld, butt-weld
- Operation: Self-acting, spring loaded
- Valve type
- Safety relief valve, low lift
- Design standard
- ISO 4126-1
- Pressure class
- PN10 to PN420
- End connections
- Flanged, threaded, socket-weld, butt-weld
- Operation
- Self-acting, spring loaded
Product description
For liquids, where a full-lift valve would slam open and cause surge. The disc lifts only a little, in proportion to the over-pressure, so the discharge area follows the relief needed, pressure loss is small and the system is not shocked by a sudden opening.
A safety relief valve opens automatically when pressure reaches its set point and closes again once it falls, protecting a vessel, line or tank from bursting. It is the last safeguard after the control system, so it is sized to the worst relieving case, set and tested on the bench, and sealed against tampering.
Construction
- Low, proportional disc lift
- Discharge area set by lift
- Flanged, threaded, socket-weld or butt-weld
- ISO 4126-1 design
Sizes and ratings
Published range: DN15 to DN200, PN10 to PN420, in carbon steel, alloy steel, stainless steel, duplex, nickel alloys. End connections: Flanged, threaded, socket-weld, butt-weld. Operation: self-acting, spring loaded.
Each valve is sized to the relieving case; the data sheet and general arrangement drawing come with the quotation.
Testing and documents
Set-pressure test on the bench, seat-tightness test to API 527 and shell test to ASME requirements, with the material certificates and the pressure-test record supplied with the valve. Third-party inspection and extra tests are added when the order specifies them.
Supply
Low-lift relief valves are supplied from Dubai to projects, plants and maintenance teams across the GCC, the wider Middle East and Africa. Most are built to the order specification, so delivery depends on size, class, material and operator; standard carbon-steel sizes move fastest. We review the data sheet before quoting and flag anything that needs clarifying, such as a missing pipe schedule or an operator torque that has not been sized.
Related valves
Other safety and relief valves in the range, for comparison when the duty is not settled yet: High-Performance Steam Safety Valve, ASME Section I, Jacketed Safety Relief Valve, Bellows Type, Pilot-Operated Safety Relief Valve, API 526, High-Temperature Pilot-Operated Safety Valve, Steam.
Identification
| Parameter | Value |
|---|---|
| Valve type | Safety relief valve, low lift |
| Construction | Proportional low-lift disc |
Standards
| Parameter | Value |
|---|---|
| Design standard | ISO 4126-1 |
| Pressure testing | Set-pressure test on the bench, seat-tightness test to API 527 and shell test to ASME requirements |
Range
| Parameter | Value |
|---|---|
| Size range | DN15 to DN200 |
| Pressure class | PN10 to PN420 |
Materials
| Parameter | Value |
|---|---|
| Body material | Carbon steel, alloy steel, stainless steel, duplex, nickel alloys |
Construction
| Parameter | Value |
|---|---|
| End connections | Flanged, threaded, socket-weld, butt-weld |
| Operation | Self-acting, spring loaded |
Application
| Parameter | Value |
|---|---|
| Typical service | Liquid over-pressure protection |
Supply
| Parameter | Value |
|---|---|
| Supply | Built to order and supplied from Dubai with material certificates and the test record |
Shipping & lead time
What is the Low-Lift Safety Relief Valve, DN15 to DN200 and what is it used for?▾
Why not use a full-lift valve on liquid service?▾
What sizes and pressure classes does the Low-Lift Safety Relief Valve, DN15 to DN200 cover?▾
How do I choose the size of a low-lift safety relief valve?▾
What pressure and temperature range does the Low-Lift Safety Relief Valve, DN15 to DN200 work in?▾
What body materials does the Low-Lift Safety Relief Valve, DN15 to DN200 come in?▾
Which standards apply to the Low-Lift Safety Relief Valve, DN15 to DN200, and how is it tested?▾
What end connections and operation does the Low-Lift Safety Relief Valve, DN15 to DN200 have?▾
How is the low-lift valve set and checked?▾
How does the low-lift valve differ from the conventional full-lift safety relief valve?▾
What documents come with the Low-Lift Safety Relief Valve, DN15 to DN200, and can you supply against a project specification?▾
How is the Low-Lift Safety Relief Valve, DN15 to DN200 supplied, and how long does it take?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
From the blog








