Safety Relief Valve with Open Lever, Steam and Air

Open-lever, open-bonnet safety relief valves for steam, air and fluids that can safely discharge: 1/2" to 20", Class 150 to 2500, manual test lift above 75 % of set pressure.
Key features
- Valve type: Safety relief valve, open lever
- Construction: Open bonnet with open lifting lever
- Design standard: API 520, API 526, ASME VIII, ISO 4126-1
- Size range: 1/2" to 20" (DN15 to DN500)
- Pressure class: ASME Class 150 to 2500 (PN10 to PN420)
- Body material: Carbon steel, alloy steel, stainless steel, duplex, nickel alloys
- End connections: Flanged; threaded, socket-weld or butt-weld on request
- Operation: Self-acting, spring loaded
- Design standard
- API 520, API 526, ASME VIII, ISO 4126-1
- Pressure class
- ASME Class 150 to 2500 (PN10 to PN420)
- End connections
- Flanged; threaded, socket-weld or butt-weld on request
- Operation
- Self-acting, spring loaded
- Valve type
- Safety relief valve, open lever
Product description
The lever arrangement that many steam and boiler codes require, on an open bonnet that keeps the spring cool and lets the operator see it. The valve can be lifted by hand above 75 % of set pressure; because the cap is not sealed, it is for steam, air and other fluids that can be released safely.
A safety relief valve opens automatically when pressure reaches its set point and closes again once it falls, protecting a vessel, line or tank from bursting. It is the last safeguard after the control system, so it is sized to the worst relieving case, set and tested on the bench, and sealed against tampering.
Construction
- Open bonnet: spring cooled and visible
- Open lifting lever
- Full-lift disc with adjusting ring
- API 526 dimensions
Sizes and ratings
Published range: 1/2" to 20" (DN15 to DN500), ASME Class 150 to 2500 (PN10 to PN420), in carbon steel, alloy steel, stainless steel, duplex, nickel alloys. End connections: Flanged; threaded, socket-weld or butt-weld on request. Operation: self-acting, spring loaded.
Each valve is sized to the relieving case; the data sheet and general arrangement drawing come with the quotation.
Testing and documents
Set-pressure test on the bench, seat-tightness test to API 527 and shell test to ASME requirements, with the material certificates and the pressure-test record supplied with the valve. Third-party inspection and extra tests are added when the order specifies them.
Supply
Open-lever relief valves are supplied from Dubai to projects, plants and maintenance teams across the GCC, the wider Middle East and Africa. Most are built to the order specification, so delivery depends on size, class, material and operator; standard carbon-steel sizes move fastest. We review the data sheet before quoting and flag anything that needs clarifying, such as a missing pipe schedule or an operator torque that has not been sized.
Related valves
Other safety and relief valves in the range, for comparison when the duty is not settled yet: Low-Lift Safety Relief Valve, DN15 to DN200, High-Performance Steam Safety Valve, ASME Section I, Jacketed Safety Relief Valve, Bellows Type, Pilot-Operated Safety Relief Valve, API 526.
Standards
| Parameter | Value |
|---|---|
| Design standard | API 520, API 526, ASME VIII, ISO 4126-1 |
| Face-to-face / end-to-end | API 526 centre-to-face |
| Pressure testing | Set-pressure test on the bench, seat-tightness test to API 527 and shell test to ASME requirements |
Range
| Parameter | Value |
|---|---|
| Size range | 1/2" to 20" (DN15 to DN500) |
| Pressure class | ASME Class 150 to 2500 (PN10 to PN420) |
| Temperature range | By body material |
Materials
| Parameter | Value |
|---|---|
| Body material | Carbon steel, alloy steel, stainless steel, duplex, nickel alloys |
Construction
| Parameter | Value |
|---|---|
| End connections | Flanged; threaded, socket-weld or butt-weld on request |
| Operation | Self-acting, spring loaded |
Identification
| Parameter | Value |
|---|---|
| Valve type | Safety relief valve, open lever |
| Construction | Open bonnet with open lifting lever |
Application
| Parameter | Value |
|---|---|
| Typical service | Steam, air and safely dischargeable fluids |
Supply
| Parameter | Value |
|---|---|
| Supply | Built to order and supplied from Dubai with material certificates and the test record |
Shipping & lead time
What is the Safety Relief Valve with Open Lever, Steam and Air and what is it used for?▾
Can the open lever safety relief valve be used on toxic or flammable fluids?▾
What sizes and pressure classes does the Safety Relief Valve with Open Lever, Steam and Air cover?▾
Why does the open lever valve have an open bonnet on steam?▾
What pressure and temperature range does the Safety Relief Valve with Open Lever, Steam and Air work in?▾
What body materials does the Safety Relief Valve with Open Lever, Steam and Air come in?▾
Which standards apply to the Safety Relief Valve with Open Lever, Steam and Air, and how is it tested?▾
What end connections and operation does the Safety Relief Valve with Open Lever, Steam and Air have?▾
How do I lift the open lever safety relief valve for the routine check?▾
How does the open lever valve differ from the packed lever valve?▾
What documents come with the Safety Relief Valve with Open Lever, Steam and Air, and can you supply against a project specification?▾
How is the Safety Relief Valve with Open Lever, Steam and Air supplied, and how long does it take?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
From the blog








