BSP Female Thrust Wire Nut Hose Fitting

BSP female fitting with thrust wire nut — specialty mechanical retention for service-friendly disassembly. straight, BSP parallel, Thrust wire nut (specialty mechanical retention).
Key features
- Fitting Configuration: straight
- Thread Form: BSP parallel
- Sealing Form: Thrust wire nut (specialty mechanical retention)
- Nominal Size Range: G1/4 – G2
- Fitting Configuration
- straight
- Thread Form
- BSP parallel
- Sealing Form
- Thrust wire nut (specialty mechanical retention)
- Nominal Size Range
- G1/4 – G2
Product description
The BSP Female Thrust Wire Nut Hose Fitting is a straight hydraulic hose fitting in the BSP family — female-swivel thread with Thrust wire nut (specialty mechanical retention) sealing form. Compliant with ISO 228, BS 5200.
Construction
- Configuration: straight
- Thread form: BSP parallel
- Sealing form: Thrust wire nut (specialty mechanical retention)
- Gender: female-swivel
- Material: Carbon steel (stainless steel available on request)
- Surface treatment: Zinc-plated, Cr3+ passivated, RoHS-compliant
- Notes: Thrust wire nut = wire-retained nut allowing repeated assembly without thread wear
Performance
Pressure rating matches the matching ferrule and host hose grade — see Indus Crimp Ferrules for compatibility tables. Tested to manufacturer-recommended impulse cycles when crimped to the correct ferrule diameter. Operating temperature -40°C to +120°C; refer to fluid compatibility chart for aggressive media.
Applicable Standards
- ISO 228
- BS 5200
How to order
Specify (a) the host hose grade and bore size, (b) the matching crimp ferrule (see the Crimp Ferrules category), and (c) the thread size you need. Indus crimps and pressure-tests the assembly before dispatch.
Companion products
Pair with Indus crimp ferrules from the matching hose grade. For other thread families see the Metric, BSP, JIC 37°, DIN, and Japanese sub-categories under Hose Fittings.
Identification
| Parameter | Value |
|---|---|
| Fitting Configuration | straight |
| Thread Form | BSP parallel |
| Sealing Form | Thrust wire nut (specialty mechanical retention) |
| Thread Gender | female-swivel |
Dimensions
| Parameter | Value |
|---|---|
| Nominal Size Range | G1/4 – G2 |
Construction
| Parameter | Value |
|---|---|
| Material | Carbon steel (stainless on request) |
| Surface Treatment | Zinc-plated, Cr3+ passivated, RoHS-compliant |
Compliance
| Parameter | Value |
|---|---|
| Applicable Standards | ISO 228, BS 5200 |
Shipping & lead time
What is the BSP Female Thrust Wire Nut Hose Fitting used for?▾
How do I order the BSP Female Thrust Wire Nut Hose Fitting when the size table has no part numbers?▾
Which hose and thread sizes does the BSP Female Thrust Wire Nut Hose Fitting come in?▾
Which BSP thread sizes can the BSP Female Thrust Wire Nut Hose Fitting be made for?▾
What pressure is the BSP Female Thrust Wire Nut Hose Fitting rated to?▾
What is the BSP Female Thrust Wire Nut Hose Fitting made from and can I get it in stainless steel?▾
Which standards does the BSP Female Thrust Wire Nut Hose Fitting follow?▾
What does the BSP Female Thrust Wire Nut Hose Fitting connect to?▾
How do I fit and seal the BSP Female Thrust Wire Nut Hose Fitting?▾
What is the difference between the BSP Female Thrust Wire Nut Hose Fitting and the BSP Female Multiseal Hose Fitting?▾
Where is the BSP Female Thrust Wire Nut Hose Fitting supplied from and what are the export details?▾
Can I buy the BSP Female Thrust Wire Nut Hose Fitting from stock in Dubai?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
The same part, in the designations used across European and Gulf trade catalogues.
- de
- gerade BSP Innengewinde Schlaucharmatur
- fr
- femelle BSP embout de flexible
- es
- hembra BSP racor de manguera
- it
- femmina BSP raccordo per tubo flessibile
From the blog
Written about this range
Assembly, crimping & certification
BSP, metric, DIN and JIS hose fittings: 60° cones, 24° cones, banjos and Komatsu ends
A hose end has to match the port the machine was built with, and on European and Asian machines that means one of four families: BSP 60° cone, metric 24° cone (light or heavy), metric 60° and 74° cones, or JIS — including the Komatsu 30° flare on 1.5 mm-pitch threads that fits nothing else. The hose-end range for each family, the ISO 12151 parts that define them, banjos, multiseal and flat-seat ends, and how to identify the one you need.
6 min read
Thread & fitting identification
Measuring a fitting without gauges: what you can establish in the field
No seat gauge, no pitch gauge, a machine down and a phone with two bars. What a caliper and a known bolt will actually tell you, and what to send.
4 min read
Buying fittings & adapters
Consolidating fittings with a hose order
One consignment, one set of documents, one clearance. The saving is not in the parts — it is in everything that happens to a parcel between here and your gate.
3 min read





