BSPT Male Hose Fitting (Tapered Thread)

BSPT male fitting with tapered thread — self-sealing on taper engagement, no separate gasket required. Use thread sealant for hydraulic service. straight, BSP taper (R / Rp — ISO 7-1, BS 21), Tapered thread (self-sealing on taper engagement).
Key features
- Fitting Configuration: straight
- Thread Form: BSP taper (R / Rp — ISO 7-1, BS 21)
- Sealing Form: Tapered thread (self-sealing on taper engagement)
- Nominal Size Range: R1/4 – R2
- Fitting Configuration
- straight
- Thread Form
- BSP taper (R / Rp — ISO 7-1, BS 21)
- Sealing Form
- Tapered thread (self-sealing on taper engagement)
- Nominal Size Range
- R1/4 – R2
Product description
The BSPT Male Hose Fitting (Tapered Thread) is a straight hydraulic hose fitting in the BSP family — male thread with Tapered thread (self-sealing on taper engagement) sealing form. Compliant with ISO 7-1, BS 21.
Construction
- Configuration: straight
- Thread form: BSP taper (R / Rp — ISO 7-1, BS 21)
- Sealing form: Tapered thread (self-sealing on taper engagement)
- Gender: male
- Material: Carbon steel (stainless steel available on request)
- Surface treatment: Zinc-plated, Cr3+ passivated, RoHS-compliant
- Notes: Tapered thread (BSPT/R/Rp) — distinct from parallel BSP (G/BSPP). Use PTFE tape or anaerobic thread sealant.
Performance
Pressure rating matches the matching ferrule and host hose grade — see Indus Crimp Ferrules for compatibility tables. Tested to manufacturer-recommended impulse cycles when crimped to the correct ferrule diameter. Operating temperature -40°C to +120°C; refer to fluid compatibility chart for aggressive media.
Applicable Standards
- ISO 7-1
- BS 21
How to order
Specify (a) the host hose grade and bore size, (b) the matching crimp ferrule (see the Crimp Ferrules category), and (c) the thread size you need. Indus crimps and pressure-tests the assembly before dispatch.
Companion products
Pair with Indus crimp ferrules from the matching hose grade. For other thread families see the Metric, BSP, JIC 37°, DIN, and Japanese sub-categories under Hose Fittings.
Identification
| Parameter | Value |
|---|---|
| Fitting Configuration | straight |
| Thread Form | BSP taper (R / Rp — ISO 7-1, BS 21) |
| Sealing Form | Tapered thread (self-sealing on taper engagement) |
| Thread Gender | male |
Dimensions
| Parameter | Value |
|---|---|
| Nominal Size Range | R1/4 – R2 |
Construction
| Parameter | Value |
|---|---|
| Material | Carbon steel (stainless on request) |
| Surface Treatment | Zinc-plated, Cr3+ passivated, RoHS-compliant |
Compliance
| Parameter | Value |
|---|---|
| Applicable Standards | ISO 7-1, BS 21 |
Shipping & lead time
Sizes & part numbers
25 sizes- Indus part no.IH-BSP-MAL-T-0302
- Hose bore
- -03 · 3/16" · DN4
- Port
- R1/8"X28
- S1 (mm)
- 12
- S2 (mm)
- —
- A (mm)
- —
- C (mm)
- 10
- Indus part no.IH-BSP-MAL-T-0402
- Hose bore
- -04 · 1/4" · DN6
- Port
- R1/8"-28
- S1 (mm)
- 12
- S2 (mm)
- —
- A (mm)
- —
- C (mm)
- 10
- Indus part no.IH-BSP-MAL-T-0404
- Hose bore
- -04 · 1/4" · DN6
- Port
- R1/4"-19
- S1 (mm)
- 17
- S2 (mm)
- —
- A (mm)
- —
- C (mm)
- 14.5
- Indus part no.IH-BSP-MAL-T-0406
- Hose bore
- -04 · 1/4" · DN6
- Port
- R3/8"-19
- S1 (mm)
- 19
- S2 (mm)
- —
- A (mm)
- —
- C (mm)
- 15
- Indus part no.IH-BSP-MAL-T-0504
- Hose bore
- -05 · 5/16" · DN8
- Port
- R1/4"-19
- S1 (mm)
- 17
- S2 (mm)
- —
- A (mm)
- —
- C (mm)
- 14.5
- Indus part no.IH-BSP-MAL-T-0506
- Hose bore
- -05 · 5/16" · DN8
- Port
- R3/8"-19
- S1 (mm)
- 19
- S2 (mm)
- —
- A (mm)
- —
- C (mm)
- 15
- Indus part no.IH-BSP-MAL-T-0604
- Hose bore
- -06 · 3/8" · DN10
- Port
- R1/4"-19
- S1 (mm)
- 17
- S2 (mm)
- —
- A (mm)
- —
- C (mm)
- 14.5
- Indus part no.IH-BSP-MAL-T-0606
- Hose bore
- -06 · 3/8" · DN10
- Port
- R3/8"-19
- S1 (mm)
- 19
- S2 (mm)
- —
- A (mm)
- —
- C (mm)
- 15
Show all 25 sizesShow fewer sizes
- Indus part no.IH-BSP-MAL-T-0608
- Hose bore
- -06 · 3/8" · DN10
- Port
- R1/2"-14
- S1 (mm)
- 22
- S2 (mm)
- —
- A (mm)
- —
- C (mm)
- 20
- Indus part no.IH-BSP-MAL-T-0806
- Hose bore
- -08 · 1/2" · DN12
- Port
- R3/8"-19
- S1 (mm)
- 22
- S2 (mm)
- —
- A (mm)
- —
- C (mm)
- 15
- Indus part no.IH-BSP-MAL-T-0808
- Hose bore
- -08 · 1/2" · DN12
- Port
- R1/2"-14
- S1 (mm)
- 22
- S2 (mm)
- —
- A (mm)
- —
- C (mm)
- 20
- Indus part no.IH-BSP-MAL-T-0812
- Hose bore
- -08 · 1/2" · DN12
- Port
- R3/4"×14
- S1 (mm)
- —
- S2 (mm)
- 27
- A (mm)
- 37
- C (mm)
- 20
- Indus part no.IH-BSP-MAL-T-1008
- Hose bore
- -10 · 5/8" · DN16
- Port
- R1/2"-14
- S1 (mm)
- 24
- S2 (mm)
- —
- A (mm)
- —
- C (mm)
- 20
- Indus part no.IH-BSP-MAL-T-1012
- Hose bore
- -10 · 5/8" · DN16
- Port
- R3/4"-14
- S1 (mm)
- 30
- S2 (mm)
- —
- A (mm)
- —
- C (mm)
- 20
- Indus part no.IH-BSP-MAL-T-1208
- Hose bore
- -12 · 3/4" · DN20
- Port
- R1/2"×14
- S1 (mm)
- —
- S2 (mm)
- 27
- A (mm)
- 38
- C (mm)
- 20
- Indus part no.IH-BSP-MAL-T-1212
- Hose bore
- -12 · 3/4" · DN20
- Port
- R3/4"-14
- S1 (mm)
- 30
- S2 (mm)
- —
- A (mm)
- —
- C (mm)
- 20
- Indus part no.IH-BSP-MAL-T-1216
- Hose bore
- -12 · 3/4" · DN20
- Port
- R1"-11
- S1 (mm)
- 36
- S2 (mm)
- —
- A (mm)
- —
- C (mm)
- 25.5
- Indus part no.IH-BSP-MAL-T-1612
- Hose bore
- -16 · 1" · DN25
- Port
- R3/4"-14
- S1 (mm)
- 32
- S2 (mm)
- —
- A (mm)
- —
- C (mm)
- 20
- Indus part no.IH-BSP-MAL-T-1616
- Hose bore
- -16 · 1" · DN25
- Port
- R1"-11
- S1 (mm)
- 36
- S2 (mm)
- —
- A (mm)
- —
- C (mm)
- 25.5
- Indus part no.IH-BSP-MAL-T-2016
- Hose bore
- -20 · 1.1/4" · DN32
- Port
- R1"-11
- S1 (mm)
- 41
- S2 (mm)
- —
- A (mm)
- —
- C (mm)
- 25.5
- Indus part no.IH-BSP-MAL-T-2020
- Hose bore
- -20 · 1.1/4" · DN32
- Port
- R1.1/4"-11
- S1 (mm)
- 46
- S2 (mm)
- —
- A (mm)
- —
- C (mm)
- 26.5
- Indus part no.IH-BSP-MAL-T-2024
- Hose bore
- -20 · 1.1/4" · DN32
- Port
- R1.1/2-11
- S1 (mm)
- 50
- S2 (mm)
- —
- A (mm)
- —
- C (mm)
- 26.5
- Indus part no.IH-BSP-MAL-T-2424
- Hose bore
- -24 · 1.1/2" · DN40
- Port
- R1.1/2-11
- S1 (mm)
- 50
- S2 (mm)
- —
- A (mm)
- —
- C (mm)
- 26.5
- Indus part no.IH-BSP-MAL-T-2432
- Hose bore
- -24 · 1.1/2" · DN40
- Port
- R2"×11
- S1 (mm)
- —
- S2 (mm)
- 65
- A (mm)
- 57
- C (mm)
- 30
- Indus part no.IH-BSP-MAL-T-3232
- Hose bore
- -32 · 2" · DN50
- Port
- R2"-11
- S1 (mm)
- 65
- S2 (mm)
- —
- A (mm)
- —
- C (mm)
- 30
S1 — Dimension S1 on the manufacturer dimension drawing. S2 — Dimension S2 on the manufacturer dimension drawing. A — Dimension A on the manufacturer dimension drawing. C — Dimension C on the manufacturer dimension drawing. Ask us for the dimension drawing if you need it stamped.
Every size is available in 316 stainless steel on request — add “-SS” to the part number when you enquire.
What is the BSPT Male Hose Fitting (Tapered Thread) (IH-BSP-MAL-T) and where is it used?▾
What do the digits in IH-BSP-MAL-T-1216 mean on the BSPT Male Hose Fitting (Tapered Thread)?▾
What sizes is the BSPT Male Hose Fitting (Tapered Thread) listed in?▾
Which part number is the BSPT Male Hose Fitting (Tapered Thread) for 1" hose and a R1"-11 thread?▾
What is the working pressure of the BSPT Male Hose Fitting (Tapered Thread)?▾
What is the BSPT Male Hose Fitting (Tapered Thread) made from and can I get it in stainless steel?▾
Which standards does the BSPT Male Hose Fitting (Tapered Thread) follow?▾
What does the BSPT Male Hose Fitting (Tapered Thread) connect to?▾
How should the BSPT Male Hose Fitting (Tapered Thread) be installed?▾
What is the difference between the BSPT Male Hose Fitting (Tapered Thread) and the BSPT Male Tapered Hose Fitting (SP Body)?▾
Where is the BSPT Male Hose Fitting (Tapered Thread) supplied from and what are the export details?▾
Can I buy the BSPT Male Hose Fitting (Tapered Thread) from stock in Dubai?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
The same part, in the designations used across European and Gulf trade catalogues.
- de
- gerade BSPT (kegeliges R-Gewinde) Außengewinde Schlaucharmatur
- fr
- mâle BSPT (gaz conique) embout de flexible
- es
- macho BSPT (gas cónica) racor de manguera
- it
- maschio BSPT (gas conico) raccordo per tubo flessibile
From the blog
Written about this range
Assembly, crimping & certification
BSP, metric, DIN and JIS hose fittings: 60° cones, 24° cones, banjos and Komatsu ends
A hose end has to match the port the machine was built with, and on European and Asian machines that means one of four families: BSP 60° cone, metric 24° cone (light or heavy), metric 60° and 74° cones, or JIS — including the Komatsu 30° flare on 1.5 mm-pitch threads that fits nothing else. The hose-end range for each family, the ISO 12151 parts that define them, banjos, multiseal and flat-seat ends, and how to identify the one you need.
6 min read
Thread & fitting identification
Measuring a fitting without gauges: what you can establish in the field
No seat gauge, no pitch gauge, a machine down and a phone with two bars. What a caliper and a known bolt will actually tell you, and what to send.
4 min read
Buying fittings & adapters
Consolidating fittings with a hose order
One consignment, one set of documents, one clearance. The saving is not in the parts — it is in everything that happens to a parcel between here and your gate.
3 min read







