316 Stainless ISO 16028 Flush Face Coupler

The 316 Stainless ISO 16028 Flush Face Coupler is a hydraulic quick-disconnect coupling in the Indus QC-16028-SS range. 316 stainless steel ISO 16028 flush-face coupler — same global interchangeability as FD89 but with corrosion-resistant 316 SS body for chemical, pharmaceutical and oil-field service.

Working pressure to 350 bar (5076 psi) at the smallest body size, with minimum burst pressure of 1400 bar. Push-to-Connect connection — flush face (no-spill) variant.

Construction & features

• Interchange standard: ISO 16028
• Connection method: Push-to-Connect
• Valving: Flush Face (No-Spill)
• Interchanges with: Parker FEM-SS, Faster SS-FFI, Stucchi A SS, Eaton FD89-2000

Available variants — specify in your RFQ

Indus supplies the full QC-16028-SS range. Specify the configuration that matches your hose end and operating envelope and we will quote against it.

• Coupling halves: Male, Female, Complete Set, Dust Cap, Dust Plug
• Body sizes: 1/4", 3/8", 1/2", 5/8", 3/4", 1", 1-1/4", 2"
• Body materials: 316 Stainless Steel
• Seal materials: Viton (other materials available on request)
• Port thread types: Female NPT, Female BSP, Female SAE O-ring

Performance

• Maximum operating pressure: 350 bar (5076 psi) at the smallest size; derates with diameter
• Minimum burst pressure: 1400 bar (20305 psi)
• Rated flow (largest size): up to 379 L/min
• Vacuum rating: 28 in./Hg
• Operating temperature range: -20°C to +200°C (varies by seal compound; specify in RFQ)

Replacing an existing coupling?

This coupler is dimensionally interchangeable with Eaton FD89-2000, and with Parker FEM-SS, Faster SS-FFI, Stucchi A SS. If you are matching an existing fleet, quote the coupling you are replacing on the RFQ and we will confirm the mating half before you order.

How to order

Confirm the coupling half (male / female / complete set / dust cap), body size, port thread type and size, seal compound and body material. Indus quotes with material certification on request, and air-freight or sea-freight to the UAE and wider GCC. Standard lead time 14 days from order; stocked configurations ship the same week.

Companion products

Indus also supplies the matching dust caps, dust plugs and seal repair kits for this series — add them to the same RFQ. For a hose assembly terminated with this coupler, request a complete assembly quote and we will supply it tested at 1.5× working pressure with a witness-test certificate.