ISO 7241 Series B Non-Valved Quick Coupler

The ISO 7241 Series B Non-Valved Quick Coupler is a hydraulic quick-disconnect coupling in the Indus QC-7241B-NV range. Non-valved variant of the FD45 ISO 7241/1 Series B coupler — straight-through bore for maximum flow with minimum pressure drop. Will not operate with valved coupling halves; intended for systems where line valving is upstream of the coupler.

Working pressure to 350 bar (5076 psi) at the smallest body size, with minimum burst pressure of 1260 bar. Push-Pull Ball Latch connection — non-valved variant.

Construction & features

• Interchange standard: ISO 7241/1 Series B
• Connection method: Push-Pull Ball Latch
• Valving: Non-Valved
• Interchanges with: Parker 6100 NV, Snap-tite 71-NV, Faster TM2/TM3 NV, Eaton FD45

Available variants — specify in your RFQ

Indus supplies the full QC-7241B-NV range. Specify the configuration that matches your hose end and operating envelope and we will quote against it.

• Coupling halves: Male, Female, Complete Set, Dust Cap, Dust Plug
• Body sizes: 1/4", 3/8", 5/8", 3/4", 1"
• Body materials: Carbon Steel (zinc plated), Brass, 303/304 Stainless Steel
• Seal materials: Buna-N, Viton, EPR
• Port thread types: Female NPT

Performance

• Maximum operating pressure: 350 bar (5076 psi) at the smallest size; derates with diameter
• Minimum burst pressure: 1260 bar (18275 psi)
• Rated flow (largest size): up to 189 L/min
• Vacuum rating: 28 in./Hg
• Operating temperature range: -40°C to +200°C (varies by seal compound; specify in RFQ)

Replacing an existing coupling?

This coupler is dimensionally interchangeable with Eaton FD45, and with Parker 6100 NV, Snap-tite 71-NV, Faster TM2/TM3 NV. If you are matching an existing fleet, quote the coupling you are replacing on the RFQ and we will confirm the mating half before you order.

How to order

Confirm the coupling half (male / female / complete set / dust cap), body size, port thread type and size, seal compound and body material. Indus quotes with material certification on request, and air-freight or sea-freight to the UAE and wider GCC. Standard lead time 14 days from order; stocked configurations ship the same week.

Companion products

Indus also supplies the matching dust caps, dust plugs and seal repair kits for this series — add them to the same RFQ. For a hose assembly terminated with this coupler, request a complete assembly quote and we will supply it tested at 1.5× working pressure with a witness-test certificate.