Skip to content
MANNTEKIH-MNT-SBC

MannTek SBC Safety Breakaway Coupling, Breaking-Bolt Type — DN 25 to DN 300

Safety Breakaway CouplingsEx-stock · delivery in 3 days
MannTek SBC safety breakaway couplings, a small threaded size and a large flanged size, front view
VIEW 01·MannTek SBC safety breakaway couplings, a small threaded size and a large flanged size, front view
1 / 5

MannTek SBC safety breakaway coupling with breaking bolts: the weakest link in a hose line or loading arm, separating under excess pull with both valves closed. Industrial or marine version, DN 25 to DN 300. From Indus Hydraulics, authorised MannTek distributor, UAE.

Key features

  • Coupling Family: Safety Breakaway Coupling
  • Coupling Type / Variant: Breaking-bolt type, industrial (0 to 90°) or marine (axial pull)
  • End A Configuration: Female or male BSP / NPT thread, flange, Victaulic or hose shank (chosen per side)
  • End B Configuration: Female or male BSP / NPT thread, flange, Victaulic or hose shank (chosen per side)
  • Size Range: DN 25 (1") to DN 300 (12")
  • Working Pressure: 25 bar, varying with body material (MannTek)
Coupling Family
Safety Breakaway Coupling
Coupling Type / Variant
Breaking-bolt type, industrial (0 to 90°) or marine (axial pull)
End A Configuration
Female or male BSP / NPT thread, flange, Victaulic or hose shank (chosen per side)
End B Configuration
Female or male BSP / NPT thread, flange, Victaulic or hose shank (chosen per side)
Size Range
DN 25 (1") to DN 300 (12")
Working Pressure
25 bar, varying with body material (MannTek)
SERV
MannTek SBC Operating manual (1" to 12")
service_manual · EN
↓ Download
Ships in 24h
Order before 14:00 GST · Jebel Ali
24-month warranty
Manufacturer-backed · genuine parts
Engineering support
A real applications engineer

Product description

A safety breakaway coupling stops a drive-away or pull-away at a terminal from tearing the hose or loading arm off its connection. The MannTek SBC is installed in the transfer line as its weakest link: it is held together by breaking bolts, and when the pull on the line reaches a defined force the bolts break, the coupling separates and the valves in both halves close at once. The spill is limited to what sits between the valves, and the line and the equipment at each end are protected.

Industrial or marine version

  • Industrial: releases at any pull angle from 0 to 90°. Install it to at least one fixed point, for example at the tank truck or on the loading arm.
  • Marine: releases on straight (axial) pull only and will not release under an angular pull. Install it between two strings of hose, as in ship-to-shore and ship-to-ship transfer.

Breaking load

MannTek calculates the breaking load for each installation, so the coupling separates before the hose, arm or manifold is overloaded, and withstands extreme side load without releasing early. After activation the unit can be reset in minutes without special tools.

Sizes and connections

DN 25 (1") to DN 300 (12"). Inlet and outlet connections are chosen individually, in any combination: female or male BSP or NPT thread up to 8", flanges to EN, ANSI, TW or TTMA, Victaulic, or an integrated hose shank, so no nipples or reducers are needed. MannTek publishes flow capacity from 380 L/min at DN 25 to 44,500 L/min at DN 300.

Construction

  • Body: stainless steel 1.4408 (AISI 316) as standard; aluminium, brass or gun metal and Hastelloy / PVDF in smaller sizes; stainless steel only at 10" and 12"
  • Seals: FKM, NBR, EPDM or FFKM; low-temperature FKM for all LPG qualities
  • Working pressure: 25 bar, varying with body material (MannTek)
  • Poppet valve design, which avoids damaged valve seats and over-rotating flaps

Indus Hydraulics is an authorised MannTek distributor in the UAE and supplies MannTek couplings direct from MannTek in Sweden.

How to order

Send the size, the body material, the connection you need (thread type and size, or flange standard and rating), the seal material and the medium, and tell us the version (industrial or marine) and how the line is installed, so MannTek can calculate the breaking load. We confirm the MannTek order code, price and lead time with the quotation.

Identification

ParameterValue
Coupling FamilySafety Breakaway Coupling
Coupling Type / VariantBreaking-bolt type, industrial (0 to 90°) or marine (axial pull)
NotesBreaking load calculated by MannTek for each installation; order code confirmed with the quotation.
ManufacturerMannTek (Mann Teknik AB), Mariestad, Sweden

Configuration

ParameterValue
End A ConfigurationFemale or male BSP / NPT thread, flange, Victaulic or hose shank (chosen per side)
End B ConfigurationFemale or male BSP / NPT thread, flange, Victaulic or hose shank (chosen per side)

Dimensions

ParameterValue
Size RangeDN 25 (1") to DN 300 (12")

Construction

ParameterValue
Materials AvailableStainless steel 1.4408 (AISI 316, standard), aluminium, brass, gun metal, Hastelloy / PVDF (by size)
Seal / GasketFKM, NBR, EPDM or FFKM

Performance

ParameterValue
Working Pressure25 bar, varying with body material (MannTek)
Flow capacity380 L/min (DN 25) to 44,500 L/min (DN 300), as published by MannTek
ReleaseBreaking bolts; both valves close on separation

Shipping & lead time

Lead TimeEx-stock from Dubai — delivered within 3 working days in the UAE. Export orders ship on the lane stated for the destination.

Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations

From the blog

Written about this part

RELATED · OFTEN PAIRED WITH

Engineers viewing this also looked at