MannTek DCC Dry Cryogenic Coupling for LNG, Tank Unit — 1" to 8"

MannTek DCC tank unit: the fixed half of a dry cryogenic coupling for LNG, nitrogen, oxygen, argon and ethylene down to -196 °C, for tanks, tankers, containers and bunker manifolds. DCC to ISO/TS 18683 or DCC ISO to ISO 21593. From Indus Hydraulics, authorised MannTek distributor, UAE.
Key features
- Coupling Family: Dry Cryogenic Coupling
- Coupling Type / Variant: Tank unit (fixed half, no swivel)
- End A Configuration: DCC bayonet interface to ISO/TS 18683, or DCC ISO interface to ISO 21593, with valve
- End B Configuration: NPT thread, or ANSI / EN flange
- Size Range: DCC DN 25 to DN 150; DCC ISO 1" to 8" (socket Ø 56 to 238 mm up to 6")
- Coupling Family
- Dry Cryogenic Coupling
- Coupling Type / Variant
- Tank unit (fixed half, no swivel)
- End A Configuration
- DCC bayonet interface to ISO/TS 18683, or DCC ISO interface to ISO 21593, with valve
- End B Configuration
- NPT thread, or ANSI / EN flange
- Size Range
- DCC DN 25 to DN 150; DCC ISO 1" to 8" (socket Ø 56 to 238 mm up to 6")
Product description
The tank unit is the fixed half of a MannTek Dry Cryogenic Coupling (DCC). It has no swivel and is mounted as the filling or discharge connector on cryogenic storage tanks, tank trucks, rail tankers, containers and ship bunker manifolds. A DCC hose unit couples to it with a turning motion that opens the valves in both halves; turning back closes both valves before the halves separate, so the transfer ends with minimal product loss.
MannTek designs the DCC for cryogenic liquefied gases (LNG, nitrogen, oxygen, argon and ethylene) down to -196 °C. It uses the same bayonet principle and self-sealing valve design as MannTek's Dry Disconnect Couplings. Unlike a flanged or threaded joint, it needs no retightening during the cool-down phase. MannTek reports more than 10,000 connect and disconnect cycles in cryogenic testing.
Two interface standards
- DCC, to ISO/TS 18683 (ASTM F3312): DN 25 to DN 150. MannTek recommends it for existing installations and for most land-based LNG work, and it covers a wider range of transfer jobs outside marine bunkering.
- DCC ISO, to ISO 21593: 1" to 8". ISO 21593 is the international standard for dry couplings in ship-to-ship LNG bunkering, written for cross-manufacturer compatibility at sea.
Both versions are rows in the Sizes & Part Numbers tab. Choose the one that matches the other half, or the standard your terminal or vessel specifies.
Sizes and connections
Sockets from Ø 56 mm (1") to Ø 238 mm (6"), with 8" in the DCC ISO version. Connections are NPT thread or ANSI or EN flange. MannTek publishes flow capacity from 250 L/min at 1" to 24,000 L/min at 8".
Construction
- Body: stainless steel
- Seals: PTFE
- Service temperature: down to -196 °C
- Working pressure: confirmed for the size and build with the quotation
Where it is used
Container discharge; LNG bunkering truck-to-ship, ship-to-ship and terminal-to-ship; loading and unloading of tank trucks, rail tankers and ships; vapour recovery lines. MannTek also lists the DCC among its carbon capture solutions.
Options and accessories
MannTek builds the DCC tank unit with these options:
- Colour coding: body, flange and handles in any colour, so each coupling is clearly matched to its medium.
- Stop before disconnect: if a valve in either half fails to seal, because of damage or a foreign body, a patented blocking function stops the halves being separated, so the operator is not exposed to the medium.
- Dust caps and dust plugs to keep dirt and water off the coupling faces.
- Vented dust and de-icing cap that leaves a clean, dry sealing face within minutes.
Options for the hose unit are listed on its own page. Name the options you need when you ask for a quotation and we confirm the MannTek build.
Indus Hydraulics is an authorised MannTek distributor in the UAE and supplies MannTek couplings direct from MannTek in Sweden.
How to order
Send the size, the version (DCC to ISO/TS 18683 or DCC ISO to ISO 21593), the connection (NPT thread size, or flange standard and rating), the medium and its temperature, and list any options. We confirm the MannTek order code, price and lead time with the quotation.
Identification
| Parameter | Value |
|---|---|
| Coupling Family | Dry Cryogenic Coupling |
| Coupling Type / Variant | Tank unit (fixed half, no swivel) |
| Notes | For LNG and cryogenic liquefied gases down to -196 °C. Working pressure and order code confirmed with the quotation. |
| Manufacturer | MannTek (Mann Teknik AB), Mariestad, Sweden |
Configuration
| Parameter | Value |
|---|---|
| End A Configuration | DCC bayonet interface to ISO/TS 18683, or DCC ISO interface to ISO 21593, with valve |
| End B Configuration | NPT thread, or ANSI / EN flange |
Dimensions
| Parameter | Value |
|---|---|
| Size Range | DCC DN 25 to DN 150; DCC ISO 1" to 8" (socket Ø 56 to 238 mm up to 6") |
Construction
| Parameter | Value |
|---|---|
| Materials Available | Stainless steel |
| Seal / Gasket | PTFE |
Compliance
| Parameter | Value |
|---|---|
| Applicable Standards | ISO/TS 18683 (ASTM F3312) or ISO 21593, by version |
Performance
| Parameter | Value |
|---|---|
| Flow capacity | 250 L/min (1") to 24,000 L/min (8"), as published by MannTek |
| Service temperature | Down to -196 °C |
Shipping & lead time
Sizes & part numbers
13 sizes- Indus part no.IH-MNT-DCC-TU-025
- Description
- DCC, ISO/TS 18683 interface. Body: stainless steel. E.g. LNG refuelling or vapour return lines
- Body size
- Ø 56 mm
- Nominal size
- 1" (DN 25)
- Max flow (L/min)
- 250
- Mount
- ANSI, EN
- Ports
- NPT
- Indus part no.IH-MNT-DCC-TU-050
- Description
- DCC, ISO/TS 18683 interface. Body: stainless steel. E.g. heavy-vehicle refuelling, tank truck and container cargo transfer
- Body size
- Ø 70 mm
- Nominal size
- 2" (DN 50)
- Max flow (L/min)
- 900
- Mount
- ANSI, EN
- Ports
- NPT
- Indus part no.IH-MNT-DCC-TU-065
- Description
- DCC, ISO/TS 18683 interface. Body: stainless steel. E.g. tank trucks, containers, smaller truck-to-ship or shore-to-ship bunkering
- Body size
- Ø 105 mm
- Nominal size
- 2-1/2" (DN 65)
- Max flow (L/min)
- 2,100
- Mount
- ANSI, EN
- Ports
- NPT
- Indus part no.IH-MNT-DCC-TU-080
- Description
- DCC, ISO/TS 18683 interface. Body: stainless steel. E.g. tank trucks, rail tankers, containers, smaller bunkering
- Body size
- Ø 119 mm
- Nominal size
- 3" (DN 80)
- Max flow (L/min)
- 2,800
- Mount
- ANSI, EN
- Ports
- NPT
- Indus part no.IH-MNT-DCC-TU-100
- Description
- DCC, ISO/TS 18683 interface. Body: stainless steel. E.g. high-volume transfer, truck-to-ship, ship-to-ship, shore-to-ship
- Body size
- Ø 164 mm
- Nominal size
- 4" (DN 100)
- Max flow (L/min)
- 7,000
- Mount
- ANSI, EN
- Ports
- NPT
- Indus part no.IH-MNT-DCC-TU-150
- Description
- DCC, ISO/TS 18683 interface. Body: stainless steel. E.g. marine bunkering, ship-to-ship or shore-to-ship cargo transfer
- Body size
- Ø 238 mm
- Nominal size
- 6" (DN 150)
- Max flow (L/min)
- 14,000
- Mount
- ANSI, EN
- Ports
- NPT
- Indus part no.IH-MNT-DCC-TU-ISO-025
- Description
- DCC ISO, ISO 21593 interface. Body: stainless steel
- Body size
- Ø 56 mm
- Nominal size
- 1" (DN 25)
- Max flow (L/min)
- 250
- Mount
- ANSI, EN
- Ports
- NPT
- Indus part no.IH-MNT-DCC-TU-ISO-050
- Description
- DCC ISO, ISO 21593 interface. Body: stainless steel
- Body size
- Ø 70 mm
- Nominal size
- 2" (DN 50)
- Max flow (L/min)
- 900
- Mount
- ANSI, EN
- Ports
- NPT
Show all 13 sizesShow fewer sizes
- Indus part no.IH-MNT-DCC-TU-ISO-065
- Description
- DCC ISO, ISO 21593 interface. Body: stainless steel
- Body size
- Ø 105 mm
- Nominal size
- 2-1/2" (DN 65)
- Max flow (L/min)
- 2,100
- Mount
- ANSI, EN
- Ports
- NPT
- Indus part no.IH-MNT-DCC-TU-ISO-080
- Description
- DCC ISO, ISO 21593 interface. Body: stainless steel
- Body size
- Ø 119 mm
- Nominal size
- 3" (DN 80)
- Max flow (L/min)
- 2,800
- Mount
- ANSI, EN
- Ports
- NPT
- Indus part no.IH-MNT-DCC-TU-ISO-100
- Description
- DCC ISO, ISO 21593 interface. Body: stainless steel
- Body size
- Ø 164 mm
- Nominal size
- 4" (DN 100)
- Max flow (L/min)
- 7,000
- Mount
- ANSI, EN
- Ports
- NPT
- Indus part no.IH-MNT-DCC-TU-ISO-150
- Description
- DCC ISO, ISO 21593 interface. Body: stainless steel
- Body size
- Ø 238 mm
- Nominal size
- 6" (DN 150)
- Max flow (L/min)
- 14,000
- Mount
- ANSI, EN
- Ports
- NPT
- Indus part no.IH-MNT-DCC-TU-ISO-200
- Description
- DCC ISO, ISO 21593 interface. Body: stainless steel
- Body size
- —
- Nominal size
- 8" (DN 200)
- Max flow (L/min)
- 24,000
- Mount
- ANSI, EN
- Ports
- NPT
Description — What this part number is, as the manufacturer lists it. Body size — Nominal body size of the coupling, which sets which halves mate. Max flow — Maximum flow capacity in litres per minute, as the manufacturer publishes it. A circuit is limited by its lowest-rated component. Mount — Mounting flange or pattern, as published. Ports — Port type and size, as published. Ask us for the dimension drawing if you need it stamped.
What is the MannTek DCC tank unit used for?▾
How do I read the MannTek DCC tank unit part numbers?▾
Which sizes does the MannTek DCC tank unit come in?▾
What temperature and pressure applies to the MannTek DCC tank unit?▾
What is the difference between the DCC and the DCC ISO tank unit?▾
Will a MannTek DCC connect to a coupling from another maker?▾
Where is the MannTek DCC tank unit mounted?▾
What options does the MannTek DCC tank unit have?▾
What do I need to tell Indus to quote the MannTek DCC tank units?▾
How does the DCC tank unit differ from the DCC hose unit?▾
Does Indus buy the MannTek DCC direct from the maker?▾
Are MannTek DCC tank units in stock in Dubai?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
From the blog




